Which Three Raw Materials Are Added Through The Top Of The Blast Furnace? In a blast furnace, fuel (coke), ores, and flux (limestone) are continuously supplied through the top of the furnace, while a hot blast of air (sometimes with oxygen enrichment) is blown into the lower section of the furnace through a series of
Where Are Blast Furnaces In Australia? Blast furnaces in Australia are located at Port Kembla and Whyalla. The removal, by oxidation, of impurities in pig iron such as silicon, phosphorus and sulfur and the reduction in the carbon content, results in the production of steel. Where is the blast furnace located? Travelling and getting to
What Temperature Is Blast Furnace? The hot blast is directed into the furnace through water-cooled copper nozzles called tuyeres near the base. The hot blast temperature can be from 900 °C to 1300 °C (1600 °F to 2300 °F) depending on the stove design and condition. The temperatures they deal with may be 2000 °C
Why Is The Air Entering The Blast Furnace Heated? The hot air blast to the furnace burns the coke and maintains the very high temperatures that are needed to reduce the ore to iron. The reaction between air and the fuel generates carbon monoxide. This gas reduces the iron (III) oxide in the ore to
Why Is The Shape Of The Blast Furnace? Ironmaking blast furnaces consist of several zones: a crucible-shaped hearth at the bottom of the furnace; an intermediate zone called a bosh between the hearth and the stack; a vertical shaft (the stack) that extends from the bosh to the top of the furnace; and the furnace
Why Is Carbon Used In The Blast Furnace? At the high temperature at the bottom of the furnace, carbon dioxide reacts with carbon to produce carbon monoxide. It is the carbon monoxide which is the main reducing agent in the furnace. In the hotter parts of the furnace, the carbon itself also acts as a
Where Does The Heat For The Blast Furnace Come From? It is a type of heat exchanger, in which the heat produced by combustion of the BF gas usually mixed with natural gas (NG) or coke oven gas (COG) is stored in the checkerwork chamber, after which cold air is blown through the hot checkerwork
Why Calcium Oxide Is Used In Blast Furnace? The heat of the furnace decomposes the limestone to give calcium oxide. This is an endothermic reaction, absorbing heat from the furnace. … Calcium oxide reacts with silicon dioxide to give calcium silicate. The calcium silicate melts and runs down through the furnace to form a layer
What Is Hot Blast In Blast Furnace? Hot blast refers to the preheating of air blown into a blast furnace or other metallurgical process. … As first developed, it worked by alternately storing heat from the furnace flue gas in a firebrick-lined vessel with multiple chambers, then blowing combustion air through the hot chamber. Why
Why Coke Is Used In Blast Furnace? In the blast furnace route of ironmaking, metallurgical coke are used for four main purposes: first to act as a reducing agent, second to fulfil the energy demand of the endothermic reduction reactions, third to maintain the structure and permeability inside the furnace and fourth to act as