Why Are My Brakes Always Engaged? If the caliper is not properly aligned with the rotor, a drag can occur. This is usually caused by a bent caliper mounting bracket or severely warped rotors and pads. To correct, visually inspect the alignment between the caliper and rotor. If the bracket is bent, replace as necessary.
How Do You Release Rear Brakes? Set the jack in place and lift just enough to put some pressure on the jack. Use a lug or impact wrench to loosen the lug nuts on the wheel. Lift the vehicle until the wheel comes off the ground, then spin the lug nuts off the lugs and
How Do I Know If My Drum Brakes Need To Be Adjusted? Drum brakes usually need to be adjusted when the brake pedal has to be pressed down a lot before the brakes engage. Adjustments can be done only on brakes that are in good shape. Keep in mind that not all drum brakes are
What Can A Bad Master Cylinder Cause? When a master cylinder begins to fail, sometimes the brakes will feel fine one second and lose braking power the next. If fluid is leaking past the seals inside the cylinder, the pedal may feel firm for a moment but won’t hold steady; it’ll feel spongy and keep
What Is A Quick Take Up Valve? A quick take-up valve in a quick take-up master cylinder assembly which reduces fluid flow noise and restriction caused by fluid flowing in one mode of operation through an incipiently or substantially closed valve spring coil stack. What is a quick take up master cylinder and what is
What Does It Mean When Your Brakes Are Grabbing? Brake grab is a condition where the braking system has become touchy or overly sensitive, as soon as you touch the brakes they react in a far stronger way than they should normally. What causes rear drum brakes to grab? One of the most common causes