What Type Cylinder Head Bolts Are Used In Late Model Vehicles? Torque-to-Yield (TTY) head bolts are used on many late model engines to clamp the cylinder head to the block. They differ from ordinary head bolts in that TTY bolts are designed to stretch slightly when they are tightened down. What is a TTY head
Is There A Left And Right Cylinder Head? The left side head is on the drivers left and the right side is on the drivers right. For a transverse engine, the side is determined by standing behind the engine. The right side head is next to the firewall. The left side head is by the
What Is The Head Bolt Torque? A crucial component of engine building is setting the torque on head bolts. Torque refers to how tight a bolt should be. When setting the torque, reliance on the specifications set by design engineers is vital. One essential tool you must have is a good quality torque wrench. How
Can You Reuse A Head Gasket Motorized Bike? The reason behind this is: once the gasket is heat cycled, the embossments will not spring back to where they were originally. In a mock-up situation, it is perfectly acceptable to install, check clearances and reuse the gasket. Can you reuse head gasket on dirtbike? Re-using a
Can U Use A Scorn Cylinder Head Dirt Bike? A home user will not be able to fix a scored cylinder with ball hones, nor will any hone they will have. If you can feel a gouge with your finger nail, the cylinder needs to be bored, platted, and polished to its final size before
Can You Repair Cracked Cylinder Head? A cracked cylinder head can be repaired using one of two methods: pinning or welding. Pinning is simple and affordable and prevents the crack from growing larger. Welding eliminates the crack by filling it but is more expensive. Can cracked cylinder heads be repaired by welding? Cracks in aluminum
Do Cylinder Heads Need To Be Resurfaced? Do cylinder heads need to be resurfaced? Cylinder heads and blocks may need to be resurfaced to restore flatness or to improve the surface finish, or milled to change the deck height for a variety of reasons. The deck surface on the head or block may need to