Low-head dams are characterized by
their low height — usually with a one foot to 15 foot drop off
— which allows water to flow over the top of the dam. Below the surface, the water falling over the dam creates highly aerated, circulating currents that trap people and objects underwater against the face of the dam.
Where do low head dams pose a hazard?
Low-head dams pose a serious danger
to vessel operators
. Surface currents below low-head dams can suck vessels toward the face of the dam. Currents above low-head dams can sweep vessels over the dam. The recirculating currents and turbulent waters below these dams can swamp vessels and drown boaters.
What is a low overhead dam?
What is a low-head dam? A low-head dam is
a man-made obstruction typically built within a river or stream channel
, and spanning from bank to bank.
What is the purpose of low head dams?
Usually made from concrete, the purpose of a low head dams is
to raise the water level upstream on a river
. This can assist with navigation of the channel by boats, create a drop for generating hydropower, and make water available at intakes for water supply and irrigation.
Which is characteristic of low head dams quizlet?
Which of the following is a characteristic of low-head dams?
They pose a hazard above and below the dam
.
What indicates a emergency situation aboard?
Day Distress Signals
The orange distress flag
is an international symbol for distress on water. Placing an orange distress flag as high as possible on your vessel allows other boaters to see your call for help from miles away.
Which of the following is a rule of operator responsibility?
The vessel operator is responsible
for acting in a prudent and reasonable manner consistent
with the ordinary practices of boating. Stay active. Stay alert. Respect the weather, the water, your passengers, fellow boaters, divers, swimmers, and property owners.
How do you survive a low head dam?
If rescue is not immediate and the victim is to survive and escape this water trap, he must go down with the current coming over the face of the dam, stay as close to the bottom as possible, and try to
get past the crest of the boil
before resurfacing. This maneuver is very difficult, and few have done it.
What if you fall in a dam?
If the dam has an open discharge system with consistent flow, you might break a few ribs, bump your head, etc. If you fall down this dam, you may risk drowning and also
maybe a water spilled brain
, but you may actually survive because there is lots of water and a raging current ro keep you away from rocks.
What is a low dam called?
A weir /wɪər
/ or low head dam is a barrier across the width of a river that alters the flow characteristics of water and usually results in a change in the height of the river level.
How are low head dams built?
A low head dam is
designed and built such that water flows continuously over the crest from bank to bank
. If water levels rise downstream, a submerged hydraulic jump can form which produces an upstream directed current that traps any recreationist who might go over the dam.”
What we know and don’t know about low-head dams?
Low-head, or run-of-the-river, types of dams – usually spanning the entire river or stream – can
present a safety hazard to the public
because of their capability to produce dangerous recirculating currents, large hydraulic forces, and other hazardous conditions sufficient to trap and drown victims immediately …
What is an important step in the fueling process?
Turn off engine(s), electronics, and extinguish all open flames
. Keep the nozzle in contact with the edge of the fill to prevent build up of static electricity to prevent sparking. Don’t top off your tank. Know how much fuel your tank holds and fill it to about 90%.
What should you do if you see a distress signal but Cannot offer assistance?
So, if you see an accident, or a distress signal, you need to render assistance any way you can, as long as you can do so without endangering yourself, your passengers or your vessel. If you cannot help out safely,
make sure to notify another boater who can as quickly as possible
; and also notify the authorities.
What is the purpose of this buoy?
buoy, floating object anchored at
a definite location to guide or warn mariners
, to mark positions of submerged objects, or to moor vessels in lieu of anchoring. Two international buoyage systems are used to mark channels and submerged dangers.
Which side do ships pass each other?
Pass “Port to Port” a vessel operating in a river or buoyed channel should with oncoming traffic keep to the
starboard (right hand) side
. When two vessels are approaching one another head on, they should alter course to starboard (right) and pass as if they were operating in a river or channel.
