Consider the five phases of the life cycle of a hazardous material-
production, transportation, storage, use, and disposal
.
What are the five main federal agencies involved in hazmat regulation?
Hazardous materials are defined and regulated by
the U.S. Environmental Protection Agency (EPA), U.S. Occupational Safety and Health Administration (OSHA), U.S. Department of Transportation (DOT), and U.S. Nuclear Regulatory Commission (NRC)
.
Is 5 a an introduction to hazardous materials?
Answer key to FEMA IS
5
. A An Introduction to Hazardous Materials containing correct FEMA IS 5.
What are the 4 hazardous materials?
Commonly transported class 4 dangerous goods include
sulphur, matches, activated carbon, alkali metals and some metal powders
.
What are the 6 categories of hazardous materials?
- Class 1: Explosives. …
- Class 2: Gases. …
- Class 3: Flammable Liquids. …
- Class 4: Flammable Solids. …
- Class 5: Oxidizing Substances, Organic Peroxides. …
- Class 6: Toxic Substances and Infectious Substances. …
- Class 7: Radioactive Material. …
- Class 8: Corrosives.
What is the definition of hazardous materials FEMA?
term “hazardous materials” in a broad sense to include:
Explosive, flammable, combustible, corrosive, oxidizing, toxic, infectious, or radioactive materials
.
What is the primary hazard associated with most flammable liquids?
The two primary hazards associated with flammable and combustible liquids are
explosion and fire
. Flammable liquids are particularly hazardous due to their ability to produce vapors. This vapor mixes with air and burns quickly when the flammable liquid is heated to its flashpoint or above and is ignited.
What are the DOT HazMat classifications?
- Class 1 – Explosives. …
- Class 2 – Gasses. …
- Class 3 – Flammable liquids (and Combustible liquids [U.S.])
- Class 4 – Flammable solids; Substances liable to spontaneous combustion; Substances which, on contact with water, emit flammable gases. …
- Class 5 – Oxidizing substances and Organic peroxides.
How many hazard classes are there?
A visor card guide for state and local law enforcement officials illustrating vehicle placarding and signage for the following
nine classes
of hazardous materials: 1) Explosives, 2) Gases, 3) Flammable Liquid and Combustible Liquid, 4) Flammable Solid, Spontanaeously Combustible and Dangerous When Wet 5) Oxidizer and …
What is required on a HazMat label?
The basic marking requirement consists of
the proper shipping name and identification number of the hazardous materials contained in the package
. Markings should be durable, in English, and not obscured by other markings or labels. Depending on the material there may be additional marking requirements.
What are the 7 hazardous substances?
- Extremely flammable gas.
- Flammable gas.
- Extremely flammable aerosol.
- Flammable aerosol.
- Highly flammable liquid and vapour.
- Flammable liquid and vapour.
- Flammable solid .
What is classified as hazardous materials?
Definition: The U.S. Department of Transportation (DOT) and the International Air Transportation Association (IATA) define hazardous materials as
articles or substances which are capable of posing a risk to health, safety, property, or the environment
; are listed or classified in the regulations; and are transported in …
What is a Class 5 hazardous material?
Class 5 dangerous goods are
oxidizing substances and organic peroxides
. There are 2 sub-divisions: Division 5.1: Oxidizing substances.
What is a Class 6 Hazard?
Class 6 dangerous goods are
toxic substances and infectious substances
. There are 2 sub-divisions: Division 6.1: Toxic substances.
What is a Category 1 Health Hazard?
The category tells you about how hazardous the product is (that is, the severity of hazard). Category 1
is always the greatest level of hazard
(that is, it is the most hazardous within that class). If Category 1 is further divided, Category 1A within the same hazard class is a greater hazard than category 1B.
What is a Class 9 placard?
A Class 9 placard is typically
used for International transportation
. If a portion of the transportation route for an international shipment is to be carried out in the United States, you do not need a Class 9 placard for the U.S. portion of the route.