Standardized. Lockout and tagout devices shall be standardized within the facility in at least one of the following criteria:
Color; shape; or size
; and additionally, in the case of tagout devices, print and format shall be standardized.
What information must be included on a lockout/tagout device?
Both locks and tags must clearly
indicate the identity of the employee who applied the device
. This provides positive identification as to who is servicing the machinery and equipment. The identification will also indicate who may not have finished working in a multiple lockout/tagout situation.
What is a required feature of a lockout device?
Lockout is defined in the Canadian standard CSA Z460-13 “Control of Hazardous Energy – Lockout and Other Methods” as the “placement of a lockout device on an energy-isolating device in accordance with an established procedure.” A lockout device is “
a mechanical means of locking that uses an individually keyed lock to
…
Who can remove a lockout/tagout device?
Lockout or tagout device removal: Each lockout or tagout device must be removed from the energy-isolating device by
the employee who applied the device
[29 CFR 1910.147(e)(3)].
What is an OSHA requirement for tagout devices?
The OSHA standard for The Control of Hazardous Energy (Lockout/Tagout), Title 29 Code of Federal Regulations (CFR) Part 1910.147, addresses
the practices and procedures necessary to disable machinery or equipment
, thereby preventing the release of hazardous energy while employees perform servicing and maintenance …
Who approves a written LOTO procedure?
For procedures involving one person, the procedure can be verified by the person locking and tagging out the equipment or system. Group LOTO procedures must have
an assigned Primary Authorized Person
to verify the procedure.
What are the two lockout/tagout types?
The two types of safety hasps are
labeled lockout hasps
, which feature write-on labels, and durable steel lockout hasps that are made of high-tensile steel.
What is a lockout/tagout kit?
What is lockout tagout? The term “lockout tagout” refers specifically to
procedures used to ensure that equipment is shut down and inoperable until maintenance or repair work is completed
. They are used to keep employees safe from equipment or machinery that could injure or kill them if not managed correctly.
What is the lockout and tagout devices and procedures?
Lockout/tagout is
a specific set of procedures to safeguard employees from unexpected energization
or startup of machinery and equipment or the release of hazardous energy during service or maintenance activities.
How often does OSHA require lockout/tagout training?
Read Weeklysafety.com’s full disclaimer. If your company or organization has LOTO procedures in place, or if any LOTO is ever used, then OSHA requires inspections on your procedure at
least once every 12 months
.
Authorized employee.
A person who locks out or tags out machines or equipment
in order to perform servicing or maintenance on that machine or equipment. An affected employee becomes an authorized employee when that employee’s duties include performing servicing or maintenance covered under this section.
Are lockout/tagout devices reusable?
Tagout devices
must be non-reusable and self-locking
.
What is another name for lockout tagout?
Proper lockout/tagout (
LOTO
) practices and procedures safeguard workers from hazardous energy releases. OSHA’s Lockout/Tagout Fact Sheet describes the practices and procedures necessary to disable machinery or equipment to prevent hazardous energy release.
What height is fall protection?
OSHA requires that fall protection be provided at elevations of
four feet in general industry workplaces
, five feet in shipyards, six feet in the construction industry and eight feet in longshoring operations.
How many steps are in lockout tagout?
The
6 Steps
of Lockout/Tagout. Without the use of proper Lockout/Tagout safety procedures, the equipment being worked on can unexpectedly start up or release these forms of energy.
How do I start a Loto program?
- Step 1: Plan for Success. …
- Step 2: Understand the Requirements. …
- Step 3: Create a Company-Specific Program. …
- Step 4: Secure Commitment from Upper Management. …
- Step 5: Communicate. …
- Step 6: Determine What Needs LOTO Control. …
- Step 7: Create Equipment- and Area-Specific Procedures. …
- Step 8: Obtain Hardware and Devices.
