- Never smoke in or near repair bays or garages. …
- Keep work areas clean and organized. …
- Never wear loose clothing or clothing that is ripped or torn. …
- Wear protective gear at all times, as appropriate for the repair.
What are the safety precautions in mechanical workshop?
Always wear safety gear
while working in the workshop. Hand gloves, safety shoes, helmets and eyeglasses are mandatory for workshops jobs like plumbing, machine fitting, welding or carpentry. For instance, some people do not wear welding glasses while dealing with welding works.
What basic maintenance is required for maintaining a car?
- Acquaint Yourself With Your Owner’s Manual. …
- Check Your Tires Monthly. …
- Change Your Oil and Oil Filter on Schedule. …
- Replace the Air Filter With Oil Changes. …
- Inspect All Other Fluids. …
- Examine Belts and Hoses. …
- Always Listen and Feel for Brake Issues. …
- Replace Wiper Blades as Needed.
What is auto shop safety?
Safety Gear You Should Wear in an Auto Shop
Gloves
to avoid burns when engines and other auto parts get extremely hot. Safety goggles to prevent eye injury while working with chemicals, welding, or grinding. Work overalls or a protective uniform to protect your whole body from extreme temperatures and dangerous …
What are the safety precautions to be made during the maintenance of a vehicle?
- #1. Change engine oil at regular intervals. …
- #2. Keep check on the cooling system. …
- #3. Let it breathe. …
- #4. Look for leaks. …
- #5. Don’t keep going on reserve fuel. …
- #6. Check your belts. …
- #7. Don’t ignore the check engine light. …
- #8. Replace your fuel filter.
What are the basic safety rules?
- STAY ALERT – and stay alive. …
- WEAR THE RIGHT CLOTHES – work clothes should fit properly. …
- USE THE RIGHT TOOLS – if you need a hammer, get a hammer. …
- LEARN HOW TO LIFT – Lifting takes more than muscle; it is an art.
What safety equipment is required for a car?
Safety Equipment
Commercial vehicles operating in California are required to be equipped with: a
fully charged fire extinguisher securely mounted
in a conspicuous place or in a marked compartment (further requirements may apply based upon type of cargo). three properly maintained red emergency reflectors.
What are the 4 general safety rules?
- Keep work areas clean. …
- Use the proper tool for the job. …
- Always wear the proper PPE for the work task. …
- Never work on live equipment. …
- Make sure chemicals are properly labeled and stored.
- Communicate hazards to other personnel. …
- Stop work when needed to address hazards.
What are 10 safety rules?
- Rule #1: Know Your Name, Number, & Address. …
- Rule #2 Talking to Strangers is a Big No. …
- Rule #3 Good Touch & Bad Touch. …
- Rule #4 Never Climb a Wall or a Fence. …
- Rule #5 Playing with Fire & Sharp Objects Not Allowed. …
- Rule #6 Your Child Should be Aware of the School Emergency Procedures.
What are the types of safety?
- Safety hazards. Safety hazards are number one on the list of 6 types of workplace hazards. …
- Biological hazards. Definition of biological hazards, commonly known as biohazards, can be any biological substance that could cause harm to humans. …
- Physical hazards. …
- Ergonomic hazards. …
- Chemical hazards. …
- Work organization hazards.
What are the 4 types of maintenance?
Four general types of maintenance philosophies can be identified, namely
corrective, preventive, risk-based and condition-based maintenance
.
What is the most important car maintenance?
- Change Your Oil Regularly. …
- Rotate Your Tires & Check Air Pressure. …
- Check Your Battery’s Charge. …
- Replace Worn-Down Brake Pads. …
- Replace Your Air Filter. …
- Check Hoses & Belts. …
- Replace Old Spark Plugs. …
- About Christian Brothers Automotive.
What is standard car maintenance?
What does regular car maintenance include? On a regular basis, you should bring your car in for a
car tune up
as well as replace consumable items such as motor oil, radiator coolant, brake fluid, power steering fluid, wiper blades and brake pads.
When did car safety became a concern?
1960s. Effective on new passenger cars sold in the United States after January 1, 1964. front outboard lap belts were required. On
September 9, 1966
, the National Traffic and Motor Vehicle Safety Act became law in the U.S., the first mandatory federal safety standards for motor vehicles.
What are the risks of being a mechanic?
- Sudden acute injuries. Mechanics often suffer acute injuries, such as cuts and burns, while using tools or handling automobile parts. …
- Exertional and stress injuries. …
- Illnesses from exposure. …
- Injured workers’ rights. …
- Claiming benefits.
What are the 5 biggest safety risks while working in an auto shop?
- Strains, sprains and tears. These are the most common injuries auto mechanics and technicians face on the job. …
- Eye injuries. …
- Chemical burns. …
- Loss of limb or digit. …
- Slips, trips and falls.
