The Dodge Ram features a wide variety of axles. For the front axle of 4×4 Rams, a Dana 44 was used on all 1500 Rams and the early (light-duty) 2500 Rams. However, most of the 2500 and all 3500 Rams use
Dana 60 front axles
. The 1500 Rams and some early light duty 2500 Rams used a 9.25 Chrysler (Spicer) axle in the rear.
What axles are in a 2005 Dodge 2500?
All 2500 hemi's have the
AAM 10.5′′ axle
.
What axle is in a 2018 Ram 2500?
2014-2018 Dodge Ram 2500
11.5′′ Rear Axle
.
Does a 2019 Ram 2500 have a solid front axle?
That said, the 2019 Ram HD 2500 and 3500 drive smoother and with more composure than you'd expect any vehicle with
solid front and rear axles would do
.
What does a Dana 80 come in?
ID A Dana 80 Rear Axle in
Chevy, Dodge Ram
, or Ford Truck IDN-126. Was: Dana 80 Rear Axles have been in production since the 1988 Model Year. They have been used in Chevy/GMC 1992-2002 , Dodge(1994-2002), and Ford (1988-current) trucks vans, and motorhome chassis.
How long is a Ram 2500 short bed?
Ram 2500 Heavy Duty trucks are available in Regular Cab, Crew Cab and best-in-class Mega Cab body styles with a choice between an 8-foot Long Bed and
6-foot, 4-inch Short Bed
.
How do I identify a Dana axle?
To figure out exactly what axle you have, you can look for
the Dana stamped bill of materials number
. This stamped number can usually be found on the righthand side or on the longer axletube on the same side of the tube as the differential cover, facing the rear of the truck.
How many axles does a truck have?
Big freight trucks have
5 axles in total
— 3 located on the truck and the other 2 on the trailer. An 8-wheeler also has 5 axles — one located in the front, 2 in the middle located at the location where the trailer is attached to the truck and then 2 at the back of the trailer.
How do I identify my Dodge rear end?
if you look at the sticker behind your grille on the inside of the hood it will list the axles and gear ratios. the rear axle should have a
sticker on top of it right next to the driver side brake drum
that will have the gear ratio. it will say either 3.55 or 3.92.
What is a Dana 60 rear end?
The Dana/Spicer Model 60 is an
automotive axle
used in OEM applications by Chevrolet, Dodge, Chrysler, and Ford. There are rear axle and four wheel drive front steering versions of the Dana 60. It can be readily identified by its straight axle tubes, 10 bolt asymmetrical cover, and a “60” cast in to the housing.
Are Rams solid axle?
Ram and Ford on the other hand, have stuck with
the tried and true solid axle under the front end of
their diesels, and the main reason is strength and simplicity. … For Dodges between 2003 and 2012, there was no means of disconnecting the front axle at all.
How fast is the Ram TRX?
The 2021 Ram 1500 TRX is the quickest pickup truck we've ever tested. It accelerates from zero to 60 mph in just 4.1 seconds and races on through the quarter-mile in 12.7 seconds
at 106.3 mph
.
What type of side frame rails do RAM light duty pickups use?
Most advanced frame in the segment with exclusive
splayed frame rail
: All Ram 1500 frames feature 98 percent high strength steel and technology (patent pending) that creates a highly efficient energy absorbing front frame rail structure for frontal impact modes.
How much is a Dana 80 worth?
A Dana 80 front axle without the adjustable knuckles will run
about $6,240
. Exact pricing will vary depending on your choice of locker or limited-slip, axleshafts, brakes, etc.
How much power can a Dana 70 handle?
Registered. They can handle
700hp+
, yet can't handle stock power… all depends on how it is used. The carrier in the 70 is the weakest link.
How do you tell if I have a Dana 80?
It can be identified by its
straight axle tubes, 10 bolt asymmetrical cover, and a “80” cast into the housing
. Dana 80's are made as full floating, rear axles only and are step up in overall strength compared to the Dana 70.
