What Do You Do When Your IPhone Screen Goes Black But Still Works?

1. Press and quickly release the volume up button.
2. Press and quickly release the volume down button.
3. Press and hold the side button until you see the Apple logo.
4. If your phone doesn't turn on, follow these steps to check your hardware and charge your phone.

What to do if your phone is working but the screen is black?

Plug in phone, wait five minutes, and then try

to do a Force Restart

. This ensure the phone has enough power to restart, and restarting could clear any errors that might be affecting the screen. If possible, remove the battery, wait 30 seconds or more, and then reinstall the battery and start your phone.

What happens when your iPhone screen goes black but still works?

If you're stuck where the screen is black but the iPhone still works, a potential reason for this to be happening could be because of a software issue. This problem usually suggests that

the iPhone is frozen or is crashing

. Luckily what you can do here is reboot your device.

How do I fix black and unresponsive iPhone screen?

When your iPhone/iPad has a black screen and unresponsive, you can hard reset the iPhone to troubleshoot black screen.

Step 1 Press and hold the “Sleep/Wake” and the “Home” key for about ten seconds

. Step 2 Wait until the Apple logo appears on the screen.

How do I restart my iPhone when the screen is black?

1. Press your iPhone's “Volume Up” button.
2. Press your iPhone's “Volume Down” button.
3. Press and hold the “Power/Side” button until the Apple logo appears.

Why is my phone ringing but the screen is black?

Step 1: Go to Dialer or Phone app settings. … Step 2: Now select the “App notifications” option. Step 3: Now if App notifications are turned off,

your display won

‘t wake up when someone calls you. Also if only the “Incoming calls” permission is off, your screen will not light up with incoming calls.

How do I fix black screen of death?

1. Click Advanced options then Troubleshoot.
2. From here go to Advanced options > Startup Settings > Restart.
3. Select option 4, Enable Safe Mode.
4. Wait for Windows Safe Mode to start.
5. Once booted, press Windows + X.
6. In the Quick Link menu select Device Manager.

How do I reset my phone when the screen is black?

1. Switch off the device.
2. Press and hold the Volume up button, the Power button and the Home button at the same time.
3. When you feel the device vibrate, release ONLY the Power button.
4. A screen menu will now appear.

How do you fix a black screen on iPhone 12?

Press and release the Volume up button. Next, press and release the Volume Down button. Finally,

press and hold the power button

. This process can take up to a few seconds so be patient and keep holding the power button till the Apple logo appears on the screen.

Why does my screen keep going black?

The main reason that your monitor is going black for a few seconds is

that there's a problem with the cables connecting it to your computer

. … It could just be an issue with the ports on your monitor, and it might work if you plug your cable into a different connection port.

How do I get my phone screen back to normal?

1. Tap the home button.
2. Select the home screen you want to use.
3. Tap Always (Figure B).

Is black screen of death fixable?

The notorious black screen of death (BSOD) can occur for a variety of reasons including overheating, update issues, a power supply issue and software or driver errors. Fortunately,

you can repair it in most cases

. If it happens more frequently, then you might have a hardware issue and should take it into a repair shop.

Is the black screen of death a virus?

FBI Virus Black Screen of Death is a

malware threat that is identified as ransomware

. FBI Virus Black Screen of Death displays a full black screen pop-up warning message, which is triggered by a ransomware Trojan that blocks computer users from accessing the desktop and the whole PC.

How do I fix black screen before login?

1. Disconnect Accessories. Remove all accessories like mouse, keyboard, and flash drive. …
2. Check Wires. I know, but if you haven't already, check the wires. …
3. Ctrl + Alt + Del. …
4. End RunOnce. …
5. Restart Video Driver. …
6. Project Screen Options. …
7. Safe Mode. …
8. Disable Fast Startup.