The 6 setting allow you to control each spray individually, or any combination of 2 spray groups at the same time . The body sprays will be plumbed on a pressure loop and function together as a unit. The tub spout does not connect to the diverter in any way.
What is a 3 way diverter?
The three-way diverter allows you to alternate between any of your selected shower outputs by directing the water from the shower head to each additional accessory , one at a time. The diverter will not adjust the water temperature or turn the water off or on.
What is a 6 setting diverter?
The 6 setting allow you to control each spray individually, or any combination of 2 spray groups at the same time . The body sprays will be plumbed on a pressure loop and function together as a unit. The tub spout does not connect to the diverter in any way.
What is a diverter in a shower?
Your shower diverter works to ensure water is flowing freely between the showerhead and the bath faucet . These valves are common in older homes that were constructed before built-in valves became the standard.
What is the diverter on a faucet?
A shower diverter, also known as a diverter valve, is a valve that diverts the flow of water from the bathtub faucet to the shower head . Thus, a diverter valve allows you to have a shower and a bathtub in the same space.
Does it matter what order you turn off the faucets shower diverter?
After you find the right combination of hot and cold water, you turn the third handle clockwise to send the water to the showerhead. When you’re done showering, turn the handle counter-clockwise to redirect the water to the tub .
What is a 4 way shower diverter?
This Thermostatic Valve has a four-way diverter that gives you the perfect setup to switch between an overhead shower, hand shower, tub spout, or other enhancements you have installed in your bathroom. ... The valve included with this system can be arranged to run two spray functions simultaneously.
What is the difference between a transfer valve and a diverter valve?
The main difference between a diverter and a transfer valve is how they direct the water supply . Diverters switch the flow of water between a tub and shower—either the showerhead or the tub faucet gets the water flow. Transfer valve sends water to multiple outlets at the same time.
Can a shower diverter be repaired?
Once you’ve determined that your shower diverter is broken, don’t delay in repairing it. Though it might be an easy task to put off, a broken shower diverter wastes water and creates a poor shower experience. Repairing a shower diverter is a home improvement project that you can complete in just one day .
Do you need a diverter valve?
Shower diverter valves can be a pretty confusing part of the shower build process. Without one, you’ll have no ability to redirect the flow of water. Even if you have a simple setup with just a tub faucet and a showerhead, you’ll need a diverter valve to switch between them .
Why does my shower diverter not work?
The most common issue with a shower diverter is when water comes out of both the tub faucet and the showerhead. Check to be sure there is no residue clogging the shower diverter lever from fully lifting or lowering. If everything looks clear, the problem could be worn-out parts in the shower diverter valve.
How do I know if my diverter valve is working?
After you remove the lid of the boiler, you have to locate the diverter valve mechanism. Run tap water on hot and observe the diverter valve . If you run hot water, the valve is supposed to close in order to divert it to the tap, meaning it should move. If you see no movement, then it’s stuck.
Where is a diverter valve located?
It’s usually a lever that’s situated behind the bath taps that you can pull up or push down. System and conventional boilers don’t require a diverter valve. This is because the hot water they produce is stored in a hot water cylinder.
Does a diverter valve increase performance?
RE: does changing the diverter valve make a difference? yes ... the stock ones fail prematurely and the aftermarket ones are smoother and sound better. plus you can adjust them to your boost requirements once you get into raising your boost. They dont raise boost.
Do I need to turn off the water to change a diverter valve?
If you’re only working on the diverter, you don’t need to turn off the water supply to the faucet . While working, place a cloth over the tub drain to prevent any dropped screws from going down the drain.
