The nF error code on a Samsung washer means that the washer is not filling with water (nF = no fill). If you get an nF error code, the first thing to do is shut off the power to the washing machine.
How do you fix the nF code on a Samsung washer?
- Step 1: Close the Machine. ...
- Step 2: Check Water Supply Valves. ...
- Step 3: Make Sure You Supply Water into Both Entry Points. ...
- Step 4: Check for Bent Supply Pipes. ...
- Step 5: Ensure That Nothing Is Clogging the Water Supply Hose from the Inside. ...
- Step 6: Check the Water Inlets.
Why does my Samsung washer keep saying nF?
The nF error code on a Samsung front-load washer means that the washer isn’t filling with water . The solution is sometimes as simple as opening the water supply faucets behind the washer. Frozen water supply lines and hoses in winter also prevent the washer from filling.
What does code nF mean on Samsung front load washer?
If the washing machine is not filling up with enough water, the 4E or NF (No Fill) error code will be displayed. ... Check that there are no kinks in the water hose connected to the washing machine and that it is not clogged.
What does it mean when the washer says nF?
If there is no water or not enough water in the washing machine, check the following: Important: If the machine is not getting enough water, and NF error code ( NO FILL ) will be displayed after 15 minutes of trying to fill. This does not mean there is a defect in the unit. ... Check and make sure water is turned on.
How do I troubleshoot my Samsung washer?
- Unplug the machine. ...
- Disconnect the hoses.
- Remove the detergent drawer by pressing the central locking button.
- Open the hatch of the drain filter at the bottom of the front panel.
- Empty the water and clean the filter.
- Put the washer on a side so that you can access the bottom.
What are the codes on a Samsung washer?
| Fault Code Washer Problem | Sud (F70) Too many suds | lE Water level sensor failure | nF Water fill problem | LE Low water level during cycles |
|---|
How do I reset my Samsung front load washer?
Resetting your washing machine is easy. Unplug it (or turn off power at the circuit breaker), wait some time for the electrical charge to clear out of the washer (usually 1 to 5 minutes at most), and then power it up again. That’s it. That’s all it takes to reset.
Why is my Samsung washer not getting water?
If the water inlet valve is defective, the wash may fill slowly or not fill at all . ... If the water pressure is adequate, try cleaning the screens inside the water inlet valve hose connection ports. If the washer still fills slowly, replace the water inlet valve.
How do I drain my Samsung washer?
- 1 Unplug the washing machine from the power supply.
- 2 Open the filter-cover.
- 3 Unscrew the emergency drain cap by turning it to the left.
- 4 Grip the cap on the end of the emergency drain tube, and then slowly pull it out about 15 cm (about 6 inches).
- 5 Allow all the water to flow into a bowl.
Why does my Samsung washer keep filling with water?
Samsung Washer overflowing
If the washer continues to fill with water even when it is not getting power, this indicates that the water inlet valve is defective . If the water inlet valve is defective, replace it. The pressure switch shuts off power to the water inlet valve when the proper water level is reached.
Why does my Samsung washer say 4C?
The 4E (4C) error code indicates that the washing machine has detected a problem with the water supply . The most common reason for this error is a blocked or kinked water supply hose.
Is there a reset button on a washing machine?
Most newer washing machines come with a reset feature that allows you to restart the washer after it experiences an error code or fault. ... Some machines have a button you push to reset its motor. On a machine without a reset button, unplugging the washer and then plugging it back in often serves as the means to reset it .
