What does f11 mean on a Whirlpool Duet washer? The dreaded Whirlpool Duet F11 error code has been plaguing Whirlpool washing machines for the last 8-10 years. This error is
often caused by a failed CCU, MCU or sometimes both control boards on the washer
.
How do I fix the F11 code on my Whirlpool washer?
What is a F11 error?
How do you reset the code on a Whirlpool Duet washer?
How do you manually drain a Whirlpool Duet washer?
What does F11 mean on my washing machine?
lindsay. harman F11 is an indication of
a communications problem between the machine control board and the motor control board
. Possible causes: Loose wire connection at either the machine control board or motor control board. Machine control board failure.
What does f1 mean on Whirlpool washer?
Usually, it's
a problem with the control board
. By replacing the control board, you should be able to fix the problem. However, it might also be a problem with the hose, something might be stuck in the hose.
How do I read a whirlpool error code?
| Error Code Error | Sud or Sd There are too many suds in the washing machine. | F5 E2 The door is not locking properly. | F7 E1 Indicates a motor speed sensing error, | F8 E1 or LO FL The washer is sensing a low flow of water. |
|---|
What is an F11 error code Kenmore washer?
In general, an F11 error code on a Kenmore washer is a
communications error
. This means that the machine control board and the motor control unit (MCU) of the washer cannot communicate with each other effectively.
How do I fix F11 error on Frigidaire?
How do I fix the F error on my Whirlpool washer?
How do I reset my Whirlpool front load washer?
What does code F mean on a Whirlpool washer?
The F/dL code indicates a
door lock error
on the machine. When the door fails to lock to allow the cycle to begin, it attempts to lock itself at least six times before the error appears on the digital display screen.
Why is my Whirlpool Duet washing machine not draining?
You need to
make sure that the drain hose is not kinked at all
. Straighten the hose to make sure that there is enough water flow and that you also remove any blockages from the drainpipe well. Ensure that you are using a U-shaped drain and secure it properly. Your instruction manual will show you how to do this.
How do I get my Whirlpool washer to drain and spin?
Try this method ”
select the RINSE/DRAIN & SPIN cycle and deselect the EXTRA RINSE option
. In this case it cancels ALL rinsing for the cycle. This is how you get a spin-only cycle.”
Where is the drain filter on a Whirlpool Duet washer?
How do you remove the CCU on a Whirlpool Duet washer?
How do I fix the F11 code on my Asko dishwasher?
What does F11 mean on Indesit washing machine?
How do I fix F1 error?
How do I fix F1 error on Whirlpool washer?
How do I fix my F1 code?
On some models it is possible that F1 could also be caused by a keypad problem. In this case it will specify in the tech sheet to power down the oven,
disconnect the keypad then power the oven back on, wait for a few minutes to see if the error reappears
. If the error reappears it is definitely the control board.
How do I reset my Whirlpool automatic washing machine?
How do I fix the f11 code on my Kenmore stove?
How do I test my Whirlpool washer?
How do I fix the F11 code on my oven?
How do I fix the F11 code on my LG stove?
What does F11 mean on my LG oven?
Usually a
failed Oven Sensor
.
