A guy-wire, guy-line, or guy-rope , also known as simply a guy, is a tensioned cable designed to add stability to a free-standing structure. They are used commonly for ship masts, radio masts, wind turbines, utility poles, and tents.
What is the difference between a guy wire and a stay?
is that guy is to equip with a support cable or guy can be to exhibit an effigy of guy fawkes around the 5th november while stay is (nautical) to incline forward, aft, or to one side by means of stays or stay can be to prop; support; sustain; hold up; steady .
Why do they call it a guy wire?
The name guy wire is derived from the term guy: defined as a rope, cord or cable used to steady, guide, or secure something . Guy wire is a tensioned cable that is both lightweight and strong. ... Guy wire is designed to work with several fittings and components making it ideal for many different uses.
How do guys use wires?
Ideally, the guy wires should extend out from the mast at a 45° angle, and should be anchored in screw eyes placed 120° apart (Figure 2). If four guy wires are used, they should be anchored in screw eyes 90° apart. Be sure each screw eye is firmly anchored in solid wood at least five feet from the base of the mast.
Can you remove a guy wire?
There is probably no way for them to move just the guy wire. The pole will have to be relocated. That will probably mean rerouting the utility. Not something they are likely to do just on your whim.
What is a down guy?
DOWN GUYS. The most common type of guy is the down guy. With this type of guy, the wire is run from the top of the pole to an anchor in the ground.
Why are Guy guards used?
Guy wire guards are used to mark and protect guy wires at the base of TallTowers . ... They can be easily secured to guy wires to shield from acts of vandalism, accidental contact with industrial machinery, and intrusion by large wildlife or domestic animals.
What is a wire stay?
Stay wires are galvanized steel wire strands that are used for sustaining mechanical load . Generally, they are made up of twisting seven wires together (six wires stranded around one wire) together. A common use for stay wires is in the electricity industry, using the wire to stay power poles and tower structures.
How many types of wires stay?
The stay rod is also named stay set, it is a component used to connect the stay wire to the ground anchor. There are two types : bow stay rod and tubular stay rod. The bow type stay rod includes stay bow, stay rod, stay plate, stay thimble. The tubular stay set is adjustable by means of an eye topped of the turnbuckle.
Do I need a guy wire?
As a general rule, it is advisable to use guy wires to support poles, masts or structures that are taller than 12 feet, at a consistent rate of 10-15 feet of space between each section. ... Hence, a guy wire may not be needed , even at heights between 15-20 feet (in locations with stable weather conditions).
What angle should guy wires be at?
Required guy wire angles are between 30 and 45 degrees off vertical . 1.5 Retract each section back to where they were originally.
How can I hide my guy wires?
- Hide the guy wire by planting attractive perennials the draw your eye away from the unsightly areas. ...
- Sew together lengths of ripstop nylon to create a large sheet of fabric. ...
- Remove the eye from unsightly guy wires by making them a part of the utilitarian portion of your yard.
Do utility poles need guy wires?
Telephone poles have a large portion of their length buried underground. Most often, guy wires are necessary on dead-end or anchor poles .
