What does stoke mean in town names? Stoke is usually derived from the word ‘stoc’, which meant
a hamlet or little settlement
, which depended on a bigger settlement nearby. Meonstoke was the stoc of the Meon people. The Danish word Thorpe meant the same thing. STOW. Stow or stowe is usually derived from stowe, which meant meeting place.
Why are places in Bristol called Stoke?
The name Stokes Croft
derives from John Stokes, a medieval mayor of Bristol in the late 14th century who also owned the land
. The name Totterdown is fairly self-explanatory: it is thought that it simply refers to the locals who would be ‘tottering down’ towards the city from the steep hill.
What does Ham mean in town names?
English: This map shows settlements, sourced from Wikipedia’s lists of places in the English counties, that end in the suffixes “-ham,” meaning “
homestead
,” or “-ingham,” meaning “homestead of the people.” These names are broadly accepted to have been the first kind of habitation names coined by the Germanic-speaking …
Why is it called stoke a fire?
To stoke is
to poke a fire and fuel it so that it burns higher
. Stoke can also mean “incite” — a principal’s impassive silence in the face of requests for more tater tots might stoke the flames of student anger. When a surfer says, “I am so stoked,” it means she is excited — the fire of enthusiasm is burning hotter.
Why do town names end in Bury?
Etymology. From Old English byriġ, the dative case of burg (“fortified place”) (whence borough). Due to the collapse of the case system between Old and Middle English, many placenames retain a fossilized dative form, as places would most commonly have been invoked in the dative (after a preposition in, at, to etc.).
Why do English towns end in ham?
And this convention in English, that ‘ham,’ it essentially means a village. This place is a village, a place where people live. And to take it a step further that
H-A-M, ham itself, in old English means ‘home,’ which is why it sort of doubles to mean village as well. So that word ham actually means home
.
What does Wick mean in a town name?
Wick was used by the Anglo-Saxons to mean
port, or a place with a specific trading or manufacturing purpose
. But industry is not always indicated in the name of these places.
What does Ford mean in town names?
Ford in modern English still means
to cross a river without a bridge
. A town with the -ford suffix was where a river was broad and shallow so that people could cross. Oxford was a good place for a team of oxen to cross the Thames River.
What does Bassett mean in a town name?
The name Bassett is part of the ancient legacy of the early Norman inhabitants that arrived in England after the Norman Conquest of 1066. Bassett was a Norman name used for a person of small stature having derived from the Old English word bas, meaning of
low stature
. Sale.
What does Minster mean in a town name?
Minster is
an honorific title given to particular churches in England
, most notably York Minster in Yorkshire, Westminster Abbey in London and Southwell Minster in Nottinghamshire.
Is stoke a real word?
Definition of stoke in the English dictionary
The definition of stoke in the dictionary is
to feed, stir, and tend
. Other definition of stoke is to tend the furnace of; act as a stoker for.
What is the meaning of Stok?
verb (used with object), stoked, stok·ing.
to poke, stir up, and feed (a fire)
. to tend the fire of (a furnace, especially one used with a boiler to generate steam for an engine); supply with fuel. verb (used without object), stoked, stok·ing. to shake up the coals of a fire.
Why is Stoke on Trent called Stoke on Trent?
It took its name from Stoke-upon-Trent where the main centre of government and the principal railway station in the district were located
. Hanley is the primary commercial centre; the other four towns which form the city are Burslem (also known as the mother town of the city), Tunstall, Longton and Fenton.
What is the weirdest UK town name?
Boggy Bottom, Cockermouth, Cockfosters, Crudwell, Greedy Gut, Greensplat, Ha-Ha Road, Moofield, Mudchute, Mudford Sock, No Place, Once Brewed/Twice Brewed, Penistone, Pratt’s Bottom, Pucklechurch, Queen Camel, Rotten End, Sandy Balls, Scratchy Bottom, Spanker Lane, Tiddlywink, Tokers Green, Upperthong, Ugley, Westward …
What was England’s original name?
The name “England” is derived from the Old English name
Englaland
, which means “land of the Angles”.
Why do towns end in Burg?
The variant burg had the meaning of a high place that is defendable. In German, it has kept the meaning of a medieval defensive castle, die Burg “boork”.
Since towns often grew up around a lord’s castle, lots of German town names end in -burg, ditto people named for such towns
.
What do they call a sandwich in England?
The word
butty
, originally referring to a buttered slice of bread, is common in some northern parts of England as a slang synonym for “sandwich,” particularly to refer to certain kinds of sandwiches including the chip butty, bacon butty, or sausage butty. Sarnie is a similar colloquialism.
What does bury mean in Old English?
Old English byrgan “
to raise a mound, hide, enclose in a grave or tomb
, inter,” akin to beorgan “to shelter,” from Proto-Germanic *burzjan- “protection, shelter” (source also of Old Saxon bergan, Dutch bergen, Old Norse bjarga, Swedish berga, Old High German bergan “protect, shelter, conceal,” German bergen, Gothic …
What is the biggest village in England?
| Village | Cottingham | Ceremonial county | East Riding of Yorkshire | Population 2011 Census | 17,164 | Area (km2) | 12.13 |
|---|
What does Holme mean in place names?
A Holme can be roughly translated as
an island either in the sense of raised drier ground in kind of marshy waterlogged land
, so land essentially suitable for putting a village on, or land almost completely surrounded by water and this is Holme Pierrepoint in Nottinghamshire, in fact it’s Holme Lane in Holme …
What does Thorpe mean in place names?
A thorpe was
an outlying farmstead
, one that probably relied on a larger settlement nearby for protection. Thwaite comes from the Norse thveit, meaning a clearing or meadow. By far the most common is -by which means farmstead or village.
Why are towns called wich?
A “-wich town” is a settlement in Anglo-Saxon England characterised by extensive artisanal activity and trade – an “emporium”.
The name is derived from the Anglo-Saxon suffix -wīc, signifying “a dwelling or fortified place”
.
What does Boro mean in city names?
A borough, also -boro, -burg or -bury, comes from the Anglo-Saxon term for
towns surrounded by walls or forts
. Towns, which we also know as -tons, are a Norse term for a village surrounded by a fence or palisade.
What does Norton mean in place names?
Places. Norton, meaning ‘
north settlement
‘ in Old English, is a common place name.
What does chipping mean in a town name?
Chipping is a prefix used in a number of place names in England, probably derived from ceapen, an Old English word meaning ‘market’, although the meaning may alternatively derive from (or via) the Medieval English word chepynge, meaning ‘long market square’. It was sometimes historically spelled Chepying.
What does Wootton mean?
Wootton is an English place name meaning
place by the wood
. The standard pronunciation rhymes the first syllable with foot.
What is Liquorice Allsorts?
Liquorice allsorts are assorted liquorice confectionery sold as a mixture. Made of
liquorice, sugar, coconut, aniseed jelly, fruit flavourings, and gelatine
, they were first produced in Sheffield, England, by Geo.
What does the word Basset mean in French?
First recorded in 1600–10; from French: noun use of adjective basset “
of low stature, short
,” equivalent to bass- “low” + -et diminutive suffix; see base
2
,-et)
Why do places end in Hampton?
Recurring elements that help us to do our own detective work include the endings “-ham” and “-ton”, ancestors of “home” and “town”;
Hampton is a combination of the two and Hampstead means, more or less, “homestead”
.
What does Combe mean in place names?
Definition of combe
1 British :
a deep narrow valley
. 2 British : a valley or basin on the flank of a hill.
Why do villages end in by?
Place names in England
Place names ending in -by, such as Selby or Whitby. These -by endings are
generally places where the Vikings settled first
. In Yorkshire there are 210 -by place names. The -by has passed into English as ‘by-law’ meaning the local law of the town or village.
Where did the word Stoke originate?
The first records of stoke come from around 1675.
It comes from the Dutch stoken, meaning “to feed or stock a fire.”
The slang stoked is believed to have come from Californian surfer slang during the 1950s or 1960s.
What does own the Stoke mean?
My favorite slang is the word “stoke.” We’re all familiar with “being stoked,” an attitude that we try to cultivate all the time, and that comes from stoking a fire, which is a nice fit for our FIRE community. But in ski towns, “the stoke” is also a noun,
something you feel, something you feed
.
The official definition of stoke:
consume a large quantity of food or drink to give one energy
.
What language is Stok?
Middle English
From Old English stocc, from Proto-West Germanic *stokk.
How do you use Stoke in a sentence?
She was stoking the stove with sticks of maple.
He stoked up the fire in the hearth. These demands are helping to stoke fears of civil war. He has sent his proposals in the hope of stoking up interest for the idea.
