What Does The Red Airbag Light Mean? - Fixanswer

Turn on the ignition switch with your car key. …
Wait for the airbag warning light to turn off. …
Turn the ignition switch of your car back off for a little longer than three seconds.
Repeat steps 1 through 3 twice to make three times total.

What can cause the airbag light to come on?

The most common cause for the airbag light coming on is that

the airbag system is deactivated or turned off

. … There may be an issue with the crash sensors or other airbag component. Alternatively, the sensor in the passenger seat that determines whether that airbag should be active or not may be faulty.

What does it mean when your airbag light is red?

When this light is on, that means

your airbags are deactivated

. It means they will not deploy properly if you get into an accident. If your car’s battery has drained recently, it may have also depleted the backup battery that powers the airbags.

How do I fix my red airbag light?

Put the key into the ignition and turn the switch to the “on” position.
Watch for the airbag light to turn on. It will stay illuminated for seven seconds and then shut itself off. After it shuts off, immediately turn the switch off and wait three seconds.
Repeat Steps 1 and 2 two more times.

Is it okay to drive with the airbag light on?

Is it safe to drive with an SRS light on? … It doesn’t necessarily mean that the car isn’t safe to drive but it’s like playing with fire if you do. When this light is on it means

your safety system isn’t working at 100%

and in some cases, it could mean that your airbags are disabled and will not deploy in an accident.

What do I do if my airbag light is on?

The airbag light indicates that

something is wrong with the seatbelts or airbags

. This means that it’s probably not safe to drive with the airbag light on. If it stays illuminated in your vehicle, we recommend having it towed to the dealership rather than driving it yourself.

Will disconnecting the battery reset the airbag light?

Often, all it takes to get rid of that pesky warning light is to reset your airbag sensor. …

Remove the terminal clamp and leave it disconnected for 5-10 seconds

to allow the airbag sensor to reset. Then reconnect the battery terminal and turn the vehicle on. With a bit of luck, the light will stay off.

How much does it cost to fix airbag light?

Number 1 — Reset Airbag Light

This process can take several hours of time and usually costs a few hundred dollars, although depending upon the type of car it may be up

to about $600

.

What does the airbag light look like?

The SRS warning light on the dashboard usually looks like a side view of a person sitting in a seat with a seat belt on, with

a large circle (the airbag) in front of the person

. It will normally light up briefly each time you start your vehicle, and then go off.

Can a blown fuse cause the airbag light to come on?

Blown fuses can definitely cause the airbag light to come on

. … When the airbag system is malfunctioning, a mechanic or auto parts store should be able to read the code that the system is putting out which will give them a clue as to what particular problem the airbag is having.

How do I know if my airbag sensor is bad?

Symptoms of a failing airbag sensor

You can easily tell if the sensor is functioning

if the airbag warning light on the dashboard is illuminating every time you start the vehicle

. But, if the airbag warning light stays illuminated after starting the vehicle, this is an indication of an airbag sensor problem.

Will removing fuse disable airbag?

Simply pulling the airbag fuse may not disable the airbags

. Many ACMs utilize an internal battery to ensure deployment even if the power is cut.

Who can check my airbag light?

The first thing you should do is have your car checked by

a qualified mechanic at your local garage

. It is vitally important that you have diagnostics run to find the cause of the airbag light and to have the problem fixed as soon as possible so your airbags will work again.

Where is the seatbelt sensor located?

The seat belt sensor can usually be found in

a vehicle’s SRS airbag module

, sometimes referred to as the ECU, or engine control unit. The SRS airbag module or ECU is usually located beneath the driver’s or front passenger’s seat, but it can be found in a few different locations as well.

Can you unplug an airbag sensor?

Due to federal law, all airbag wiring is

YELLOW

, if you want to disconnect your sensors, but not waste alot of time, pop off your steering shaft cover, disconnect the yellow connector (with your battery disconnected 2millivolts can set off your airbag) and tape both ends of the connector.