What does WIC mean in a house plan? WIC — Walk-in closet . W — Window or washer. WD — Window. WH — Water heater.
How do you read House plan symbols?
How do you read floor plans?
What does Pan mean in a floor plan?
DBL = double ovens (typically seen in larger than average kitchens) P, PAN or PANTRY = Pantry . Depending on the plan, the pantry could be as small as the refrigerator or as large as a luxury walk-in closet.
What is HP on a floor plan?
Hp is the height of the window sill , i.e. the distance from the finished floor to the edge of the wall opening under the window sill.
What does F mean in floor plan?
EF — Exhaust fan . FD — Floor drain. GM — Gas meter. HTR — Heater. HW — Hot water unit or tank.
What symbols are used in architectural drawings?
- Keynotes. These square-enclosed numbers always refer to the numbered list of notes running down the right hand side of the same page they appear on. ...
- Grid Lines. ...
- Elevation Tags. ...
- Section cuts. ...
- Door and Window Tags. ...
- Wall Type Tags.
What information is found on a floor plan?
Floor plans are architectural drawings that give you a bird’s eye view of the dimension lines, measurements, and spatial relationships between objects and fixtures. They give the builder or designer something physical to look at and serve as the initial blueprint for your design project.
How do you read architectural plans?
Start in upper left corner and work way across page so as not to miss any details. Read the plan cover sheet . This contains important project information like the project name, architect, contact information, project information and the date. It might also include a drawing of the finished product.
What do symbols on blueprints mean?
Blueprint symbols are generally used to indicate function, objects, or systems in the floor plan or any kind of engineering drawing . It could be present in structural drawing, architectural drawing, electrical drawing, machine, etc.
What are the 4 parts of architectural plans?
Plot Plan (site plan) 3. Elevations 4. Foundation Plan 5. Floor Framing Plans 6.
What does SD mean on house plans?
| 11 SD Sliding Door Construction, Flooring, Architectural | 5 SD Sewer Drain Construction, Flooring, Architectural | 3 SD Schematic Design Construction, Engineering, Design | 3 SD Smoke Detector + 2 HVAC, Construction, Construction Industry | 1 S . D . Smoke D d etector Drawing, Construction, Education |
|---|
What does loc mean on a floor plan?
LOC. Limit Of Cost . Architectural, Technology, Architecture.
What does F mean in construction?
Finished Floor + 2 . Architecture, Engineering, Technology.
What does AF mean in construction?
Actual Finish Date . Construction Project Management, Construction Project Management, Engineering, Project Management.
What is T & B in floor plan?
| 28 T&B Top and Bottom Construction, Engineering, Structural | 1 T&B Trucks and Buses | 1 T&B Turn and Bank | 1 T&B Turn and Burn | 1 T&B Twisted and Bent |
|---|
What are three most common symbols found on a blueprint?
- Compass. The north arrow tells you about the orientation of the property. ...
- Stairs. Stairs are customarily indicated by parallel lines with their measurements. ...
- Doors. ...
- Windows. ...
- Walls. ...
- Appliances.
What are the architectural abbreviations?
- AFF – Above finished floor.
- AFG – Above finished grade.
- BOF – Bottom of footing.
- BOW – Bottom of wall.
- BP or B/P – Blueprint.
- CAD – Computer-aided drafting.
- DWG – Drawing.
- Exc – Excavate.
What are drawing symbols?
In art, a symbol is something recognizable that stands for or represents something else —an idea or concept that would be hard to draw or paint, such as love or hope for eternal life.
What are the 6 key features of a floor plan?
- Maximize the property. ...
- Utilize space effectively. ...
- Accessibility. ...
- Flexibility. ...
- Functionality. ...
- Maximize the use of light. ...
- Attention to size. ...
- Fitting to your lifestyle.
Do house plans include electrical and plumbing?
The typical plan set does not include any plumbing , heating or air conditioning drawings due to the wide variety of local codes and climatic conditions. These details and specifications are easily obtained from your builder, contractor, and/or local suppliers.
Do house blueprints include plumbing?
Do the plans/blueprints include plumbing and electrical? A: The rough plumbing is included on the plans showing the kitchen and bath fixture symbols and their locations . However, the location of where the pipes come into the house is site specific and not included on the plans.
What are the 6 types of construction drawings?
- Plans.
- Interior and exterior elevations.
- Building and wall sections.
- Interior and exterior details.
- Schedules and room finishes.
- Framing and utility plans.
How do you read architectural drawings for dummies?
What are the architectural details?
Abstract. An architectural Detail is a small piece of the whole, yet it has the power to characterize and define the entire building . Details tell us what a building is; they are fundamental to the life and personality of a space.
What types of construction drawings shows property lines?
Site Plans
An architect will create a diagram that shows the plot of land and its property lines, along with its landscape features, setbacks, driveways, utility poles and power lines, fencing, and on-site structures.
What 5 drawings are included in a set of house plans?
- Exterior Elevations. In addition to the front exterior, your drawing set will include drawings of the rear and sides of your house as well. ...
- Foundation Plan. ...
- Floor Plan(s) ...
- Building Sections. ...
- Roof Plan. ...
- Notes and Details Page(s) ...
- Beam Calcs Pack.
What are the 5 major architectural drawings?
- Floor Plan Drawings. These are in-depth versions of the room layout. ...
- Landscape Drawing. ...
- Section Drawings. ...
- As-built drawings. ...
- Installation Drawings. ...
- Plinth Beam Layout. ...
- Roof Slab Layout. ...
- Component Drawings.
What are the 5 basic components of construction drawings?
- 1 Architectural Drawings: This is one of the types of construction drawings. ...
- Structural Drawings: ...
- Electrical Drawings: ...
- Plumbing and Sanitary Drawings: ...
- Finishing Drawing:
What comes first CD or DD?
Pre-Design: Research and Space Planning
Schematic Design (SD), Design Development (DD) and Construction Documentation (CD) are stages in CAD drafting to ensure that the budget and vision of client and architects reach an arrangement that can be well executed.
What is a CD set?
A complete construction document set (CD set) includes the architectural, structural, MEP and civil engineering drawings . CD set also includes all specifications for pricing as well obtaining the building permits. Modeling of all the above aspects may also be involved in the set.
What does CTS stand for on house plans?
CTS stands for Cut to Size (construction)
What does Fl mean in construction?
| 15 FL Floor Level + 1 Construction, Engineering, Civil Engineering | 2 FL Fire Line Construction, Architectural, Technology | 1 FL Flange Engineering, Construction, Building | 1 FL Floor + 1 Postal, Construction Drawing, Structural | 1 F L l Floor Rental, Woodworking, Engineering |
|---|
What does FR mean on a building?
FR – Fire-Resistant .
What does FP mean in house plans?
FP means Floor Plan . FP is an acronym for Floor Plan.
How do you read architectural plans?
Start in upper left corner and work way across page so as not to miss any details. Read the plan cover sheet . This contains important project information like the project name, architect, contact information, project information and the date. It might also include a drawing of the finished product.
