In general, a
lower final drive ratio
will lead to less torque at the wheels but a higher top speed. Meanwhile, a higher ratio will result in the opposite, i.e. more torque at the wheels but a lower top speed.
What gear gives the most torque?
People have always told me that when a car goes into low gear, it goes slower but puts “more power” or “more torque” on the wheels, which allows it to descend slippery slopes or get out of
mud traps
more easily.
Does a higher gear ratio mean more torque?
Higher gears multiply torque less
, but they require less input speed to deliver the same output speed; that’s why axle ratios also determine engine cruise rpm. … Similarly, lower axle gears (longer lever) require the engine to move a greater distance (turn more times) per tire revolution than higher gears.
Are 3.73 or 4.10 gears better?
4.10s are going to accelerate faster and decelerate faster on lift. However the trade off is greater fuel consumption per mile driven and higher engine speed per given road speed. In basic terms the 4.10s will feel quicker and
3.73 will feel faster
.
Is 3.55 or 3.73 gears better?
PERFORMANCE: The larger the axle ratio number, the quicker the truck will accelerate. For example, a truck equipped with 3.55:1 axle gearing will accelerate faster than one equipped with a 3.31 axle ratio. Similarly, a pickup with a
3.73 axle ratio will be faster than one with 3.55s
.
Does gear ratio affect torque?
In general, a
lower final drive ratio will lead to less torque at the
wheels but a higher top speed. Meanwhile, a higher ratio will result in the opposite, i.e. more torque at the wheels but a lower top speed. Remember, this is done without any change to the power and torque of the engine.
Does a lower gear ratio increase torque?
Does a lower gear ratio increase torque? In general,
a lower final drive ratio will lead to less torque at the wheels but a higher top speed
. Meanwhile, a higher ratio will result in the opposite, i.e. more torque at the wheels but a lower top speed.
How do gears increase torque?
The arrangement of the driver and driven gears determine if the gear train will increase torque or speed. To increase output torque using a gear train,
a power source should be directly connected to a smaller gear and used to drive a larger gear
.
How do you increase torque?
An effective modification that will increase torque significantly is to
install a turbo or supercharger
. Forced induction forces air into your engine, increasing the power the engine provides. Depending on the torque curve you prefer, a turbocharger will need time to spool before it provides torque benefits.
What gear ratio is better for acceleration?
A lower (taller) gear ratio provides a higher top speed, and
a higher (shorter) gear ratio
provides faster acceleration. . Besides the gears in the transmission, there is also a gear in the rear differential.
Can I run 35s with 3.73 gears?
Well-Known Member. You can do it but it’s definitely not ideal. The ratios with a
5.13 first on a 3.73 rear
end and 35’s (your proposed setup) is very slightly taller than what a stock 6MT Tacoma is in first gear so it’s not like you’re going to be causing massive wear getting started.
Are 4.10 gears good for highway?
Installing 4.10 gears
improves the car’s performance on the track but with negligible effects to the highway driving
. … Switching from a gear set of 3.55 or 3.73 to 4.10 gears will affect your gas mileage slightly as your engine will be turning more times to rotate the rear wheels once.
How do I choose gear ratio?
The conventional procedure for selecting gear ratios is to
pick ratios that run the engine rpm to redline at the end of the medium and longest straights
, and pick the lower gear ratios to minimize the rev drop at each shift. This method minimizes the number of shifts per lap.
Is 3.31 or 3.55 axle ratio better?
Normally, the
3.31 would get you better gas mileage
, on highway. But, with the 3.55 you will get a bit more pulling power so less time at higher RPM to get your trailer moving and when going uphill. If most of your towing is flat highway, the 3.31 should do you fine.
Is 3.92 or 3.55 gear ratio better?
3.92 is about 10% lower than the 3.55
with the same size tire. With the same rearend ratio the standard 17′′ wheels and tires are effectively about 6% lower geared than the 20′′. So you can get about halfway between the two ratios depending upon what you choose for wheel and tire size.
What is a 3.31 axle ratio?
Consider that with a 3.31 axle ratio, the
driveshaft turns 3 1/3rd times for every revolution of the rear wheel
. With a 4.30 ratio, it turns 4 1/3rd times for every revolution of the rear wheel. The numerically higher gear ratio (in this case, 4.30) increases wheel torque and improves acceleration from low speeds.
