Many seem not too thrilled with these products but know that, since biguanide and chlorine are not compatible, they cannot simply change by adding chlorine pucks or shock without major problems. Doing so will make an otherwise clear biguanide pool
turn vividly strange colors and producing a curdled effect in the water
.
How long does it take to convert from Baquacil to chlorine?
Since the process can easily take
two or three weeks (or more)
, it is a better idea to do it in spring or fall; not July! If possible, allow Baquacil Sanitizer level to naturally drop to 30 ppm or partially drain and refill to dilute the Baquacil Sanitizer concentration in the pool.
Can I switch from Baquacil to chlorine?
Biguanides, sold under the names of Baquacil or Soft-Swim or Aqua Silk can perform well, but some users develop
severe water conditions
and decide to switch back to chlorine as their main sanitizer.
Can I put chlorine in after stabilizer?
There is no ironclad rule
, but you should never shock the pool immediately after you add stabilizer. The cyanuric acid in pool stabilizer can lock and waste the chlorine. Add too much shock and chlorine to the pool and you risk rendering your chlorine useless.
Is Baquacil more expensive than chlorine?
Baquacil is more expensive
. It is also harder to keep a Baqua pool clear, especially after several years since white water mold can develop since it can be resistant to Baqua (PHMB).
Why is my pool water cloudy with Baquacil?
Hazy or cloudy water
indicates a water clarity problem in a pool
. Haze results from accumulation of unwanted contaminant’s such as dirt, suntan lotion, bacteria and algae, body oils, and minerals. Haze also can be caused by improper water balance or problems with your circulation system.
How soon can you swim after adding Baquacil?
If you use Baquacil
®
, you can swim
15 minutes after
you add chemicals.
What happens if you have too much stabilizer in your pool?
Anything above 50 ppm the stabilization effect of CYA starts to level off. Too much CYA in pool water
will interfere with the chlorine’s ability to kill bacteria and algae from forming
.
What happens if you swim in a shocked pool?
Chlorine- based shock contains high levels of pH and will alter both your pH and chlorine levels in the pool
. … As you can see, even the type of shock you use can affect other chemicals that are already in your pool. And in turn, it will delay your swimmers from returning to the pool.
Can you swim right after adding stabilizer?
You may swim immediately if Stabilizer was added through the skimmer
, otherwise wait 12 hours to swim until all product in the pool is dissolved. For pools with bleachable surfaces, such as colored plaster or vinyl, do not allow product to sit on the bottom of the pool.
How long does Baquacil last?
BAQUACIL® 4-Way Test Strips usually last
18 months
. On the label of each test strip bottle is an expiration date. Replace your strips if they have expired in order to obtain accurate readings.
Is there an alternative to chlorine in a pool?
There are alternatives to chlorine including
bromine, ionizers, and ozonators
, though with each you’ll still need to use some chlorine. … A fourth alternative is PHMB, which doesn’t require the use of any chlorine. All four have drawbacks, including cost.
How often do you add Baquacil?
Baquacil Oxidizer should be added
once per week
at the rate of one quart per 10,000 gallons of pool water. Add directly into the pool with the filter running. (Do not pour into skimmer).
How do you clear a cloudy Baquacil pool?
Hazy or cloudy water
indicates a water clarity problem in a pool
. Haze results from accumulation of unwanted contaminant’s such as dirt, suntan lotion, bacteria and algae, body oils, and minerals. Haze also can be caused by improper water balance or problems with your circulation system.
Will backwashing clear a cloudy pool?
Low chlorine level is the primary cause of cloudy water. … If all the chemicals are balanced, but water is still cloudy, there might be fine particles inside the pool, and you need to use a clarifier or pool flocculant and then vacuum up the pool. If all do not work,
try backwashing your filter since it might be clogged
.
Can you use shock with Baquacil pool?
The BAQUACIL® Pool Care System is different from chlorine and bromine-based pool sanitizers. For that reason, many chemicals that work with one system won’t work with the other. The BAQUACIL® CDX® Pool Care System
is not compatible with chlorine, bromine
, any copper based chemical or non-chlorine shock.
