Look for a capacity plate near the operator’s position or on the transom of the boat. This plate indicates
the maximum weight capacity and/or the maximum number of people that the boat can carry safely in good weather
. You should not exceed either the stated maximum weight capacity or the maximum number of people.
What are the three things that should be included on your float plan before you embark on an extended outing?
| Front Back | List three things that should be included on your float plan before you embark on an extended outing. Vessels description: give number, size, make, etc.; Number, names, and addresses of passengers; Trip plan |
|---|
What is a good rule of thumb to prevent running out of fuel on a PWC?
Operating at two-thirds throttle instead of full throttle will conserve fuel. The following rule will help prevent running out of fuel:
One-third to get out
.
One-third to get back
.
What is a rule of thumb to prevent running out of fuel?
Running out of fuel is the number one cause of boater distress. The rule of thumb is to use
one third of your fuel on the way out
, one third on the way back and have one third left for emergency. The first leg of your trip should be upwind and against the current.
Where should you prepare your vessel before launching it from the trailer *?
- Transfer all equipment and supplies to the vessel.
- Disconnect trailer lights from the towing vehicle.
- Remove all tie-down straps before backing down the ramp, but leave the trailer winch line securely attached to the vessel.
What information is displayed on the capacity plate?
This plate indicates
the maximum weight capacity and/or the maximum number of people that the boat can carry safely in good weather
. You should not exceed either the stated maximum weight capacity or the maximum number of people.
What information is on a float plan?
- Describes the vessel, including its registration number, length, make, horsepower, and engine type.
- Includes the description and license plate of the tow vehicle and trailer.
- Gives the number of passengers, their names and addresses, and a contact in case of emergency.
What information is displayed on the capacity plate of an outboard powerboat quizlet?
What information is displayed on the capacity plate of an outboard powerboat?
the maximum weight and number of people that the boat can carry and horsepower rating
.
What information is usually found on the capacity plate of a Powerbot?
In fact, these determinations are so significant, the Federal Law mandates all powerboats, under twenty feet, carry a “capacity plate,” which
lists the vessel’s maximum capacity, load, and engine power (for vessels with outboard engines)
.
What information should be included in a float plan quizlet?
A float plan should: Describe the vessel, including
its registration number, length, make, horsepower, and engine type
.
What is a basic rule for safe boat handling underway?
1. If another vessel is approaching you from the port — or left — side
of your boat, you have the right of way and should maintain your speed and direction
. 2. If a vessel is aiming to cross your path and they’re on your starboard — or right — side, they have the right of way.
What does it mean if you are stand on vessel in an overtaking situation?
Stand-on vessel:
The vessel that must maintain its course and speed unless it becomes apparent that the give-way vessel is not taking appropriate action
. If you must take action, do not turn toward the give-way vessel or cross in front of it.
What is the best way to ensure you have enough fuel on board?
Drain all water from the engine compartment
, and be sure the drainage plug is replaced and secure. Make sure you have enough fuel or know where you can refuel. Remember that you want 1⁄3 to go out, 1⁄3 to return, and 1⁄3 in reserve. Check to be sure you have a fully charged engine battery and fire extinguishers.
What should you do immediately after launching a vessel from a trailer?
Prepare for the drive home well away from the boat ramp so that you don’t block ramp traffic. While on land at the ramp area,
remove and dispose of all weeds
from the vessel and trailer, remove the drain plug to release bilge water, and drain any live wells.
What is required when a vessel is being transported on a trailer?
All trailers owned and operated in California, and used to transport vessels of any size, must be licensed by the California DMV. By law, your
trailer must be equipped with taillights, brake lights, turn signals, and clearance lights.
What is most important when selecting the right PFD for a passenger?
When you’re choosing a PFD, you need to make sure that: It is the appropriate type for your boating location and activity; It is
the right size and has enough buoyancy to support you in the water
; and. It is approved by the U.S. Coast Guard.
What does a boat capacity plate indicate?
A Boat’s Capacity
Always check the capacity plate usually near the operators position or on the boats transom. This plate indicates
the maximum weight capacity or the maximum number of people that the boat can safely carry
.
What should be included in a boat plan?
- Details about your vessel. Name of your boat. Boat registration number. …
- Details about your boat’s safety equipment. Sound signals. …
- Passenger information. Boat operator’s name, address, and telephone number. …
- Description of your trip. Day/time of trip departure.
Does boat capacity include fuel?
The maximum gross load listed on the capacity plate is the
total weight your boat can handle
. This weight includes people, equipment, stores, fuel, engine assembly, and steering controls.
Does boat capacity include motor?
About Capacity
The “maximum capacity” or “maximum weight” for a recreational boat refers to the weight, including people, gear and the motor, that
can be carried safely
.
What information should be included in a trip plan boater exam?
- The name and number of the pleasure craft.
- Type of vessel, sail or power.
- Name, address and telephone number of the owner.
- Number of people on board.
- Size, type and colour of pleasure craft.
- Type of engine.
- Distinguishing features of the pleasure craft.
Which of the following statements best describe what a float plan is?
A Float Plan is
a document that outlines your expected travel journey while boating
. Consider it a way of leaving a footprint on the water that can be followed by anyone who may be searching for you.
What is the vertical surface on the back of the hull?
Outboard engines are attached to
the transom
(vertical surface at the back of a hull) outside of the vessel.
Search and Rescue (SAR) Vessels
When responding to emergencies, search and rescue vessels, as well as police and government vessels, exhibit
blue light
(s). You should steer well clear of a vessel with a blue flashing light.
When you see only a green light on another boat?
When you see only a green light,
you may be approaching a sailing vessel and you must give way
. A sailing vessel is always the stand-on vessel except when it is overtaking.
What does a capacity plate indicate quizlet?
capacity plate. This plate indicates
the maximum weight capacity and/or the maximum number of people that the boat can carry safely in good weather
. You just studied 32 terms! 1/32.
Which of the following actions is required of Powerboat a when approaching sailboat B head on in darkness or reduced visibility?
Powerboat A: When only red and green lights are visible, you are approaching a sailboat head-on. Give way to your starboard side. Sailboat B:
When white, red and green lights are visible
, you are approaching a powerboat head-on.
What should a boater do with a float plan quizlet?
What should you do with your float plan for a weekend water outing?
Mail it to your home address. Stow it with the boat’s registration papers. Fax it to the nearest U.S. Coast Guard station.
What should you do before fueling your boat quizlet?
What should you do before fueling your boat?
Turn off the engine and close all windows, ports, doors, and other openings
.
What is the important safety information found on a boat’s capacity plate quizlet?
What important safety information is found on a boat’s capacity plate?
Maximum weight and/or number of people the boat can carry safety
.
What does a boat’s capacity plate indicate quizlet?
A boat’s capacity plate gives
the maximum weight and/or number of people the boat can carry safely in certain weather conditions
.
When should you check to see that fuel lines?
Before fueling the tank
. Explanation: All the stated concerns such as the condition of fuel line and fuel vents should always be checked before fueling the tank. While fueling the tank make sure not to fill it up to brim.
What is the purpose of the one third fuel rule boating?
Running out of fuel is the number one cause of boater distress. The rule of thumb is to use one third of your fuel on the way out, one third on the way back and
have one third left for emergency
. The first leg of your trip should be upwind and against the current. If possible, save the downbound passage for last.
What should the operator of Powerboat a do?
Power-driven vessels crossing
The operator of a powerboat should
maintain his course when being approached on his port side by another powerboat
.
What should the operator of a powerboat do when approaching a very large vessel?
- Watch out for other vessels, and be ready to slow down and yield to large vessels. …
- Make your pleasure craft more visible by operating in a group with other small boats.
- Stay off the water in fog or high winds.
3. Which of the following must follow Navigation Rules for a powerboat?
When a sailboat turns on its motor
, and is using it to make way, it then essentially becomes a powerboat under the Navigation Rules.
Does the stand on vessel have the right of way?
Stand-on craft: Boats with the right-of-way are called ‘stand-on craft’. Stand-on craft
are able to maintain speed and direction when approaching other vessels
. Give-way craft: Boats that do not have the right-of-way are called ‘give-way craft’.
Which boat should stand on?
Both vessels should turn to starboard (the right). Paths That Cross: The vessel on the operator’s port (left) is the give-way vessel.
The vessel on the operator’s starboard (right) is the stand
-on vessel.
What does it mean if you are the stand on vessel in an overtaking situation quizlet?
What does it mean if you are the stand on vessel in an overtaking situation?
You are about to be passed and should maintain course and speed
.
How should a vessel’s registration number and validation decal should be displayed?
- Number must be painted, applied as a decal, or otherwise affixed to both sides of the bow.
- Number must read from left to right on both sides of the bow.
- Number must be in at least three-inch-high BLOCK letters (no script).
How should a vessel’s registration number be displayed?
How should a vessel’s registration number and validation decal be displayed?
Number must be painted
, applied as a decal or otherwise affixed to both sides of the bow, placed where it can easily be read. Number must be left to right on both sides of the bow. Number must be at least three inch high BLOCK letters.
What is the first thing you should do after retrieving a boat onto a trailer quizlet?
What is the first thing you should do after retrieving a boat onto a trailer?
Pull the trailer well away from the boat ramp
. Where should portable gasoline tanks be filled?
