What Is A Blue Line Survey?

by | Last updated on January 24, 2024

, , , ,

Blue-line Survey — Defines a survey plat in hardcopy form, which is characterized

by a blue-ink depiction of the property and its details

, as opposed to a photocopy. Lenders and purchaser’s counsel occasionally require this type of survey because it is readily identifiable as the surveyor’s original work.

What do markings on survey stakes mean?

Using special stakes and markings, the surveyor will

mark the limit of disturbance

. This is either the edge of the property or a section of the property that cannon be disturbed. The edge of the property, especially the corners, is usually marked using a boundary survey monument or a steel rod.

What do blue survey markers mean?

As surveyors measure, they mark their work with pink flags. … Blue flags – Blue means

water, irrigation or slurry

. Usually this is drinking water. Damage this line and you could flood your home or find yourself without drinking water for a few days.

What color markers do surveyors use?


Pink

is strictly used by land surveying companies to state where the temporary survey markings are. The color codes for locating utilities, conduit or rebar in concrete can present slightly different colors depending on the surface. Most often used are the colors red, yellow, blue and black.

How do surveyors mark property?

The three most commonly used markings are the

simple stakes, flags and pins

. These surveyor symbols are common to any construction project and guarantee that everything gets put in the right place.

Can a neighbor remove survey stakes?


Yes

. Under Section 605 of the California Penal Code it is a misdemeanor to intentionally remove or destroy a permanent survey marker.

How do I find blue line streams?

1. Using Google Maps, locate your school. Streams are indicated by blue lines.

Look for the closest blue line stream and find its name

.

What does a pink stake mean?

Pink indicates

temporary survey markings

. When a land surveyor visits to precisely draw the exact lines between adjoining properties, he or she will mark the ground in pink. This indicates the legal boundaries affecting the project.

How far apart are property markers?

Property markers are typically

14.5 feet in from the curb

. Go to your front curb and measure back about 14.5 feet in the area you think your marker should be. Use a metal detector and then start digging.

What color are property markers?


Red

is the uniform color for electric power lines; orange for communications; yellow for gas, oil and steam; green for sewers and drain lines; and blue for water. White is used for proposed excavation limits or routes, and pink is used for temporary survey markings.

Is it possible to survey my own property?

Decide to survey the land

yourself

.

Land surveying is a relatively difficult and time-consuming task, so expect to pay between $350 and $500, if not more, if you choose to have your land professionally surveyed. If you don’t want to pay for this, you can survey the land yourself.

What does a surveyor do at the property?

Surveyors (sometimes called Land Surveyors)

take measurements to determine land and property boundaries, prepare maps and survey plots

.

Is there a app that shows property lines?


LandGlide

is a mobile app for your smartphone or tablet that instantly enables you to obtain property information while standing in a field, sitting in a car, or at the office. … Simply hovering over a property while using LandGlide allows you to instantly display this information.

Can you move survey stakes?

One question we get asked frequently is: Is it illegal to move a survey marker? Generally, the answer to that question is

YES

, it is illegal. Only government officials with a permissible purpose, such as a cadastral land resurvey, should remove or alter permanent survey markers.

How far down are survey stakes?

Survey pins are typically

15 feet in from the curb

. Go to your front curb and measure back about 15 feet in the area you think your marker should be. Use a metal detector and then start digging. The marker should be about 6-10 inches below the surface.

David Martineau
Author
David Martineau
David is an interior designer and home improvement expert. With a degree in architecture, David has worked on various renovation projects and has written for several home and garden publications. David's expertise in decorating, renovation, and repair will help you create your dream home.