Never carry a tool by
the cord. Never yank the cord to disconnect it from the receptacle. Keep cords away from heat, oil, and sharp edges (including the cutting surface of a power saw or drill). Disconnect tools when not in use, before servicing, and when changing accessories such as blades, bits, etc.
What should you avoid when using powered tools?
- Do not wear gloves, loose clothing or jewelry while using revolving power tools. …
- Do not use a tool unless you have been trained to use it safely and know its limitations and hazards.
- Avoid accidental starting by ensuring the tool is turned off before you plug it in.
What is acceptable when using power tools quizlet?
Which is acceptable when using powered tools? … Use
only nonconductive tools and materials
.
What should always be done with power tools before using them?
Always turn off and unplug the tool
before you make any adjustments or change accessories. Never use any accessory except those specifically supplied or recommended by the manufacturer. They should be described in the tool’s Instruction Manual. Never use power tools in wet or damp conditions.
What are five safety practices associated with power tools and equipment?
Power Tools: Best Practices
Never yank the cord or hose to disconnect it from the receptacle.
Keep cords and hoses away from heat, oil and sharp edges
. Disconnect tools when not using them, before servicing and cleaning them, and when changing accessories such as blades, bits and cutters.
When should you not use power tools?
Terms in this set (10)
Hand-held electric power tools should
always be disconnected
when not in use to prevent shock or fire hazards. Machinery with rotating or reciprocating parts that are within seven feet of the floor or working platform requires what additional equipment?
Which hand-held power tools may only be equipped with a positive on off switch?
The following hand-held powered tools may be equipped with only a positive “on-off” control switch:
platen sanders
, disc sanders with discs two inches or less in diameter; grinders with wheels two inches or less in diameter; routers, planers, laminate trimmers, nibblers, shears, scroll saws and jigsaws with blade …
Are power tools bad for you?
Power tools present hazards such as noise, vibration, electrical, moving parts and projectiles. They have
the power to cause severe and even fatal injury if used incorrectly
.
What are dangers of power tools?
- Never carry a tool by the cord or hose.
- Never yank the cord or the hose to disconnect it from the receptacle.
- Keep cords and hoses away from heat, oil, and sharp edges.
What is the safest way of keeping electrical tools?
- Keep floors dry and clean to avoid slipping while working with or around dangerous tools.
- Keep cords from presenting a tripping hazard.
- Never carry a power tool by its cord.
- Use tools that are double-insulated or have a three-pronged cord and are plugged into a grounded receptacle.
How will you make sure that your electric tools are ready to go when you need them?
To make sure that your electric tools are ready to go when you are,
keep them clean and free of dust
. … Take some time to clean out the dust every once in a while on your tools while they are sitting in storage. Check the Cords. Look for wear and tear on the power cords on your electric tools.
What are the 10 basic guidelines for tools safety?
- Inspect regularly. Regularly inspect your tools to make sure that they are in good condition.
- Wear gloves. …
- Carry with care. …
- Don’t pocket sharp objects. …
- Be aware of your surroundings. …
- Use the right tools. …
- Follow instructions. …
- Clean and return.
How can you tell if tools are bad or unsafe?
- chisels and wedges with mushroomed heads.
- split or cracked handles.
- chipped or broken drill bits.
- wrenches with worn out jaws.
- tools which are not complete, such as files without handles.
What are the 5 tips for sale handling of tools?
- INSPECT YOUR TOOLS. Never issue or use a damaged or defective hand or power tool. …
- PICK THE RIGHT TOOL. …
- WEAR YOUR PPE. …
- DON’T ALTER YOUR TOOLS. …
- HANDLE WITH CARE. …
- KEEP YOUR DISTANCE. …
- PICK UP AFTER YOURSELF. …
- UNPLUG AND DISCONNECT.
What are 5 basic safety rules?
- Your safety is your personal responsibility.
- Always follow the correct procedures.
- Never take shortcuts.
- Take responsibility and clean up if you made a mess.
- Clean and organize your workspace.
- Ensure a clear and easy route to emergency exits and equipment.
- Be alert and awake on the job.
What are the five basic safety rules?
- STAY ALERT – and stay alive. …
- WEAR THE RIGHT CLOTHES – work clothes should fit properly. …
- USE THE RIGHT TOOLS – if you need a hammer, get a hammer. …
- LEARN HOW TO LIFT – Lifting takes more than muscle; it is an art.
