All Prism Frame pools feature Intex's patented Hydro AerationTM Technology, a unique feature that
increases air content in the water to boost the filters ability to remove sediment
, leaving pool water crisp, clear and silky. … rectangular pools.
What is Hydro aeration technology?
The innovative Hydro Aeration TechnologyTM for Intex Pools
improves the circulation and filtration of the pool water
and makes the water healthier and more comfortable. The Hydro Aeration TechnologyTM improves the water clarity and the air freshness around the pool.
Is aeration good for a pool?
Aeration is beneficial to pools everywhere
, but you'll notice more benefits if you live in a dry climate rather than a humid one. Aerating is also more advantageous in the summer months, since cooler months (when you're likely opening and closing the pool) don't really require it.
What does pool aerator do?
An aerator is an
attachment that plugs or screws into the side of your pool
. Using return water from the pump, it sprays a fountain of water back into the pool. Air is introduced to the small droplets of water as they're sprayed. This, in turn, allows heat to escape the water more quickly through evaporation.
What does Intex air jet valve do?
Improved Circulation and Filtration Fine particles
in water clump together and settle to the bottom of the pool during the aeration process, making it easier to filter and remove sediments through the filtration system. The improved filtration and circulation make the pool water healthier and more comfortable.
Does aeration raise pool pH?
When water is aerated, it creates turbulence.
Outgassing of CO
2
from water results in an increase in pH.
Aeration is the only means of increasing pH that will not
increase the Total Alkalinity.
How do you add aeration to a pool?
Add the Air
Simply
doing things like pointing the returns upwards and running the pump on high to create surface
disturbance will aerate the water reasonably well. One could also add an aerator to a standard return. If there are waterfalls, fountains, spillovers, etc., turning those on will also help.
Does aeration cool water?
Increased aeration rate increases
the evaporation rate, which in turn, lowers water temperature.
Is it safe to swim in a pool with a low pH?
Low pH is bad for swimmers
, your pool and your wallet. Acidic water is corrosive. The most immediate effect is felt by swimmers as the water will sting their eyes, nasal passages and will dry out skin and hair, causing itching.
Can you swim in aerated water?
Swimming with an Olympian's strength in the murky waters would be gross, but doable. The aeration tanks are different. Because a person
is less buoyant in aerated water
, it is much more difficult to tread water. rings close by in case danger strikes and a crew member falls in.
How much does an aerator cool a pool?
In general, you should expect the aerator that you use to
lower the temperature of your pool by 3-4 degrees Fahrenheit
.
Can you swim in a pool with high alkalinity?
Can You Safely Swim in a Pool With High Alkalinity? As long as you have enough chlorine in your pool (around 3ppm for total chlorine) and the pH level is balanced (between 7.4 to 7.8), then a
pool with high total alkalinity is still safe to swim in
.
How do you keep a pool cool?
- #1. Invest in a Mechanical Evaporative Chiller. …
- #2. Run Your Pool Filter at Night. …
- #3. Add a Water Feature. …
- #4. Shade Your Pool Area. …
- #5. Drain & Refill Your Pool. …
- #6. Consider a Reversible Heat Pump. …
- Stay Cool This Summer.
How do I circulate my above ground pool?
One of the best ways to immediately improve your swimming pools circulation is
to clean your filter and remove any debris from the skimmer basket
. By doing this your pump will be allowed to push more water through your hoses and out the pools return boosting the water circulation.
What is the Intex strainer hole plug used for?
Product details. Intex hole plug for use with all Intex pools and Sand N Sun pools by Intex that are 16′ in diameter or smaller. Used inside strainer assembly to plug
the hole that allows water to pass through hoses and to the filter pumps
. Ideal for changing filter cartridges, hoses, and etc.
