Typically Architectural Shop Drawings are described as
a set of drawings produced by the contractor, supplier, manufacturer, subcontractor, or fabricator
. … They are drawn to explain the fabrication and/or installation of the glazing items for the manufacturer’s production crew or contractor’s installation crews.
What does shop drawings mean in construction?
A shop drawing is a
drawing or set of drawings produced by the contractor, supplier, manufacturer
, subcontractor, consultants, or fabricator. Shop drawings are typically required for prefabricated components. … The shop drawing normally shows more detail than the construction documents.
What does shop drawing mean?
Shop drawings (also known as
fabrication drawings
) are detailed plans that translate design intent. They provide fabricators with the information necessary to manufacture, fabricate, assemble and install all the components of a structure.
What should shop drawings include?
- Information required for fabrication, such as dimensions and special instructions, including connection details.
- Applicable fabrication standards.
- Installation and erection information.
- Dimensions that require on-site verification.
What is the difference between construction drawing and shop drawing?
Construction drawings, as they’re referred to, are produced prior to the project officially starting the construction phase.
Shop drawings are produced once the project is underway
.
How do you read a shop drawing?
- Examine the plate size and fitting. Plate sizes are indicated by a specific numerical dimension and an equal sign. …
- Notice the slope. The slope is located near the middle of the drawing on the left hand side. …
- Look at the height of the object. …
- Figure out alphabetical abbreviations.
What is GFC drawing?
What is GFC? GFC drawings (
good for construction drawings
) are construction drawings and specifications for a designated project. … GFC drawings include details such as structural drawings, electrical drawings, staircase drawings, mechanical drawings, plumbing drawings, and other architectural construction documents.
What are the 6 types of construction drawings?
- Plans.
- Interior and exterior elevations.
- Building and wall sections.
- Interior and exterior details.
- Schedules and room finishes.
- Framing and utility plans.
Who prepares as-built drawings?
Who Creates As-Built Drawings? Typically,
the architects or designers who originally designed the project
will also create the as-builts. They are familiar with the original specifications and are therefore the most qualified to reflect recorded changes.
Are shop drawings the same as as builts?
Shop Drawings vs As-Built Drawings
Well, both types of drawings are made by subcontractors and contractors. So, there is no difference in this aspect. … As-built drawings can be made for the whole building as well as for specific components. But the
shop drawings are only made for the different components of a building
.
What is as built drawings?
In construction projects, “as built” drawings are
used to track the many changes from the original building plans that take place during the construction of a building
. Also simply called “as builts,” these drawings are an important part of new construction, renovation, and maintenance.
What is a work drawing?
:
a scale drawing of an object to be made or structure to be built intended for direct use by the
workman — compare detail drawing.
What are design drawings?
Design drawings. Design drawings for construction contain all the information necessary for the construction contractor to bid on and build a particular project. Typically, the preparation of design drawings provides
a detailed record of the design and structural requirements of the works
.
What is MEP drawing?
In the construction industry, MEP stands for
Mechanical, Electrical, and Plumbing
. … MEP drawings include all the details regarding HVAC systems, wiring, and piping required to construct a commercial or residential structure.
What is measured drawing?
An architectural drawing of an existing building, object, site, or detail that is accurately drawn to scale on the
basis of field measurements
.
What is detail drawing?
:
a separate large-scale drawing of a small part of a machine or structure
especially : working drawing.
