What Is The Best Way To Avoid Accidents At Intersections?

1. Always check for cars twice at a stop sign before pulling into an intersection. ...
2. Beware of vehicles that may run the red light. ...
3. Watch for pedestrians in the crosswalk before entering an intersection. ...
4. Always signal appropriately.

Which is the best way to avoid road accident?

1. Drive in the prescribed speed limits on the various roads. ...
2. Always put on helmets, seat belts and other safety equipments before driving a bicycle/ motor cycle/vehicle. ...
3. Do not drink and drive. ...
4. Never use mobile phones or ear phones while driving.

What is the safest way to drive at an intersection?

1. A. Look to the right – you have to give way to the right.
2. Look to the left.
3. Look behind you.
4. Look ahead of you.
5. E. All the above.
6. The correct answer is E. Correct.

Where do you look first at an intersection?

Before you enter an intersection, look to both the left and right for approaching vehicles or crossing pedestrians. Look to your left a second time, as vehicle approaching from your left will be closer than those approaching from your right.

Are you supposed to slow down at an intersection?

Slowing down at the intersection gives you more time to read the situation and react to it . If someone is coming through on the cross street, you can adjust your speed and trajectory to hopefully avoid an accident. If not, the lower speed will help reduce the possibility and severity of injury and vehicular damage.

What is the biggest cause of trip accidents?

• Uneven floor surfaces.
• Unsuitable floor coverings.
• Wet/slippery floors.
• Changes in levels.
• Trailing cables.
• Poor lighting.
• Poor housekeeping.

What are the four main causes of accidents?

• Over Speeding.
• Drunken Driving.
• Distractions to Driver.
• Red Light Jumping.
• Avoiding Safety Gears like Seat belts and Helmets.
• Non-adherence to lane driving and overtaking in a wrong manner.

What are the main causes to road accidents How can we reduce the road accidents?

• consuming alcohol.
• taking medicine or drug that affects their responses.
• attired as tiredness affect the driving skills.
• driver maybe sick or injured.
• the driver may be angry or upset.
• not obey the traffic rules.
• maintaining more speed and crossing the limit.

What’s the most important rule for approaching an intersection?

You might need to stop if there are emergency vehicles coming through the intersection , if the lights change to red just before you get there, if there are pedestrians on the road, or if you see another vehicle coming which you need to give way to.

When you stop at an intersection should you always look?

Look right first, then left, then right again. D. Look left first, then right, then left again. When stopped at an intersection, you should first look to your left , as vehicles coming from the left are closer to you than vehicles coming from the right.

How many times should you scan an intersection?

A general rule of thumb is to scan ahead 12-15 seconds in all environments , 1-11⁄2 blocks in city environments and 1⁄4 mile in highway environments. Blind spots and mirrors should be checked every 3-5 seconds before and after changing lanes.

Should I slow down when approaching a green light?

When approaching a steady green traffic light, drivers. A. Continue driving, unless there are vehicles or pedestrians already in the intersection. ... You may continue driving, but should approach the intersection at a speed that will allow you to slow down and stop if the light changes before you get there.

When should you reduce your speed at an intersection?

It is important to know the braking distance, so that you can slow down in time at intersections. If you’re approaching a blind corner , your speed must be low enough for you to stop if a vehicle appears suddenly from either side. If you’re going 30 miles an hour.

What should you do before you enter an intersection on a green light?

1. Come to a complete stop and wait for the light to change.
2. Slow down and continue through the intersection.
3. Stop at the limit line before you continue through the intersection.

What is the primary cause of tripping?

Circuit Overload

The most common and basic cause for a circuit breaker tripping is too much power consumption. This occurs when an electrical circuit draws more amperage than it can manage, causing the circuit breaker to trip (as designed) as a safeguard against electrical overload.

How high is a tripping hazard?

Under the Americans with Disabilities Act (ADA), trip hazards are defined as a change in any vertical level over 1/4′′ . For people with disabilities, trip hazards are a serious issue.