All Dodge Journey models from 2009 through 2026 share a 5×127 mm (5×5) bolt pattern.
What is the bolt pattern on a 2009 Dodge Journey?
The bolt pattern is 5×127 mm (5×5).
Every Journey from 2009 onward uses this same setup. If you're hunting for new wheels, double-check that the PCD matches 127 mm and grab the right lug nuts (M14 x 2.00 thread). No surprises here—it’s straightforward.
What is the bolt pattern on a 2014 Dodge Journey?
The bolt pattern is 5×127 mm.
Yep, it’s the same as every other Journey made after 2009. If you’re eyeballing a used one, run a quick NHTSA VIN lookup just to be safe—sometimes owners swap parts without updating the paperwork.
What is the bolt pattern on a 2012 Dodge Journey?
The bolt pattern is 5×127 mm (also written as 5×5).
No matter the trim or whether it’s FWD or AWD, this pattern stays the same. Pro tip: pop in 71.6 mm hub-centric rings when swapping to aftermarket wheels—keeps the vibrations down and your sanity intact.
What’s the bolt pattern on a 2011 Dodge Journey?
The bolt pattern is 5×127 mm.
| Spec | Value | Note |
|---|
| Lug count | 5 | Same across every Journey model |
| PCD | 127 mm | Distance between stud centers |
| Center bore | 71.6 mm | Grab hub rings if your wheels don’t match |
| Lug nut thread | M14 × 2.00 | Torque these to 135 Nm (99 ft-lb) |
| Common rim sizes | 17×6.5 to 20×8.5 | Stock offsets usually land between 25 to 50 mm |
Is 5×5 and 5×120 the same?
They are not the same and are not interchangeable.
Here’s the deal: 5×5 is just inches for 5×127 mm. Meanwhile, 5×120 mm pops up on some European and Japanese rides. You *can* find adapters, but they’ve got to handle the offset and weight—don’t cheap out here.
What is 5×127 bolt pattern?
The 5×127 bolt pattern is a 5-lug design with a 127 mm pitch circle diameter.
This isn’t just a Dodge thing—Chevy, Buick, Cadillac, and even some Fiats use it. Just don’t assume every 5×127 wheel fits; check the center bore and offset first or you’ll be cursing under your car.
What size rims fit a 2009 Dodge Journey?
Factory rim sizes range from 16 to 20 inches in diameter.
| Year/Trim | Rim Size | Tire Size | Notes |
|---|
| 2009 SE | 16" | 225/70R16 | Base model, great for winter rubber |
| SXT (FWD) | 17" | 225/65R17 | Most common stock setup |
| R/T or SXT AWD | 19" | 225/55R19 | Sportier look, lower profile |
What size tire fits a Dodge Journey?
The stock tire size is 225/55R19, but 235/55R19 is a common upgrade.
Bumping up to 235/55R19 usually works, though some trims might rub a bit. Push to 245/50R19? Expect to roll the fender lips—just don’t go wild without checking clearance first.
What car has a 5X114 3 bolt pattern?
Popular models include Honda Civic and Accord, Nissan Qashqai, Hyundai i30, Kia Cee’d, Mitsubishi Lancer, Toyota Auris, and Mazda 3.
This pattern’s everywhere in compact Asian rides—and some Euro compacts too. Before you buy, flip to the manual or run a TireRack fitment guide—saves you from a headache later.
What is the bolt pattern for a 2016 Dodge Journey?
The bolt pattern is 5×127 mm.
Torque those lug nuts to 135 Nm (99 ft-lb) in a star pattern—safety first. Factory wheels run from 17×6.5 up to 19×8.5, depending on trim. And yeah, use a torque wrench. Guesswork belongs in board games, not your wheels.
Will 5×115 fit 5×127?
No, 5×115 wheels will not fit without adapters.
Even with adapters, you’re playing with fire—clearance and load ratings can bite you. Measure backspacing, check caliper clearance, and maybe sleep on it before you commit.
Will a 5X114 3 fit a 5X127?
No, 5×114.3 wheels will not fit a 5×127 hub without adapters.
Adapters exist, but they push the wheel outward—offset matters. Only use high-quality aluminum spacers rated for your car’s weight and speed. Otherwise, you’re building a ticking time bomb.
What is the bolt pattern for a 2015 Dodge Journey?
The bolt pattern is 5×127 mm.
Stock wheels are usually 17×6.5 with a 40 mm offset. Upgrading? Don’t eyeball it—plug your specs into a suspension clearance tool first. Trust me, your fenders will thank you.
