Answer: The term “flush” means level or straight and on the same plane, so flush cutters cut a wire level. Side cutters or angle cutters, cut on an angle, meaning the wire edge will be
cut to one side
.
What is a flush cutter?
Flush-cutters –
provide an unbroken, even cut to the material for a clean design look
. … Because the jaws are angled, both ends of the wire cannot be cut flush, only the wire on the side that is flat will be flush, the wire remnant on the angle side will have an angle or “V” cut.
Are Flush cutters wire cutters?
Flush cutters have a variety of different
uses apart from cutting thin wires
. They can also be used the same way you’d use pliers as a means of reaching into tight spaces to reach and hold wires.
What is a flush cutter used for?
A flush cutter creates a cut that is smooth, neat, and just perfect. The best part is that you may not only use it for
jewelry cutting
. These same flush cutters are useful in cutting cables and electronic wires.
What is the difference between side cutters and diagonal cutters?
One of the key differences is that
diagonal cutters are often better suited to smaller, more delicate cutting tasks
, whereas side cutters are ideally suited to larger-scale applications. While this isn’t always the case, it is useful to know as a general rule.
What do you use end cutting pliers for?
End-cutting pliers – also known as nippers, are used to
cut nails, wires, rivets, and bolts
. Due to the almost flat head design, the user can get flush with the surface to cut the object, without digging into it.
What is the function of rosary pliers?
Rosary Pliers
Typically used by
beading artists
, the rosary plier is a combination of round nose plier and side cutter. The round jaws are great for wrapping wire and holding beading cord, while the integrated cutter means you don’t have to switch tools as often.
Can side cutters cut steel?
Diagonal pliers are useful for cutting copper, brass, iron, aluminium and steel wire. … However
higher quality side cutters can cut hardened steel
, such as 2 mm piano wire.
What can I use instead of a wire cutter?
- 1 – Bend it. If the wiring in question is on the thinner side and relatively pliable, you could try bending it. …
- 2 – Hacksaw. …
- 3 – Tin Snips. …
- 4 – Reciprocating Saw. …
- 5 – Angle Grinder.
How many types of cutters are there?
16.47). Various other types of form milling cutters are
convex milling cutters, concave milling cutters, corner-rounding milling cutters
, pocket milling cutters, spindle milling cutters, form milling gang cutters, etc.
When would you use a diagonal cutter?
Diagonal cutting pliers are used
for cutting wires, screws and nails
. They are known by many different names: side cutting pliers, side cutters, nippers and wire cutters, to name but a few! They are called diagonal cutting pliers because the cutting blades are at an angle to the handles.
Can wire cutters cut through metal?
For the most basic application of cutting cables, you can use the
wire cutters to cut copper, brass, aluminium, iron and steel wire
. To protect you from being shocked by the electric cables you are working with; some wire cutters have insulated handles.
How thick can wire cutters cut?
An 18-inch bolt cutter can cut metal up to 9/32 of an inch in diameter while a 24-inch bolt cutter can cut thicknesses up to
5/16 of an inch
, depending on the material’s hardness.
