SP is Standard Play, LP is Long Play ( 1⁄2 speed, equal to recording time in DVHS “HS” mode), EP /SLP is extended/super long play ( 1⁄3 speed) which was primarily released into the NTSC market.
What is SP in VHS?
SP is short for Standard Play . Standard play allows you to record information onto the tape the way it was intended, with no quality loss. By default, VCRs and camcorders will record your footage as standard play. On a standard VHS tape, recording footage in SP mode will yield 2 hours of video.
What does SP and SLP mean on a VCR?
SP (Standard Play) was the fastest speed and gave the best picture: about 240 horizontal lines of resolution. In SP mode, a camcorder or VCR would record 2 hours (120 minutes) on a T-120 tape. ... SLP (Super Long Play) or EP (Extended Play) was the slowest speed, recording 6 hours on a T-120 tape.
What is SP video quality?
SP ( Standard Quality mode ): Records in standard recording mode. HQ (High Quality mode): HQ mode has the highest picture quality. However, the recording time will be shortened.
Is SLP the same as EP?
Is SLP the same as EP? EP/SLP is short for extended play . Extended play is similar to LP, but actually provides you even more recording time. EP was primarily used to document long, continuous events without the need to change video tapes every 2 hours.
How long will VHS tapes last?
How Long Do VHS Tapes Last. VHS tape life expectancy varies from one VHS tape to the next. In general, VHS deterioration of 10–20% occurs over a period of 10 to 25 years . Better quality tapes have a slightly longer lifespan, as do VHS tapes that have been kept in a climate-controlled setting.
What is difference between XP LP and EP?
XP – Maximum Quality – 1 hour per disc. SP – Good Quality – 2 hours per disc. EP – Low Quality – up to 8 hours per disc .
What is an LP vs EP?
Back in the 20th Century, the term EP stands for Extended Play Record. It referred to a type of vinyl record that was played at a different speed than the standard play records (SPs and LPs). The difference between EP and LP is that an LP is ‘Long Playing' and generally has more than 8 tracks.
How can you tell how long a VCR is?
Put your video in the player and rewind it to the beginning. Eject the video tape and then push it back in (this resets the counter on the player to zero). Press play or fast forward and the digital number counter will display the amount of time the tape has recorded on it.
What does LP stand for?
LP stands for ‘ Long Play .
What does HQ mean in movies?
HQ or High Quality is a generalized term to define the video quality, more precisely picture quality. An HQ video will definitely have a better bitrate than standard video which by default has a bit rate of 2-3 Mbps (megabytes per second).
How can you tell if a VHS is blank?
Check the location of the film
Since factory-sealed and blank cassettes will be fully rewound and ready for recording, you can check the where the film is rolled up. If you're looking at the top of the cassette like you're about to put it in a VCR, the film will be all the way on the left side.
How do I change the recording speed on my VCR?
On modern VCRs, the recording speed settings are changed via the remote control. A button marked “SP/LP/EP” will make the change while recording video. SP is the default recording speed on VCRs. Additionally, a VCR may have the recording speed setting button on the body of the VCR, marked in a similar fashion.
At what temperature do VHS tapes melt?
VHS tapes are highly sensitive to cold and should be stored between 55 and 70 degrees Fahrenheit .
What causes VHS tapes to degrade?
VIDEO TAPES DETERIORATE!
Videotapes lose their magnetic signal over time, quality and color of your memories deteriorate due to the friction between the VCR head and tape, and the tape grows brittle and eventually breaks – even when sitting on a shelf! ... The illustrations or photos were coded into a magnetic tape.
What is the best way to store VHS tapes?
Cassettes and VHS tapes should be kept out of the sun in a cool, dry place where the temperature is consistent . Extreme cold and heat degrade tapes more quickly. Like CDs and DVDs, tapes should be stored vertically to cut down on the risk of warping or cracking.
