- Scan for hazards, e.g., oncoming vehicles, vehicles approaching from rear, merging vehicles;
- Check for blind spots;
- Signal your intention and accelerate into passing lane;
- Accelerate quickly to an appropriate speed;
- Concentrate on the path ahead;
What are the rules of passing?
Move to the left lane for passing
. Speed up by about 10-15 mph over the speed of the vehicle that you are passing. After you pass the vehicle in front of you, look over your right shoulder and make sure that it is clear and you have enough space to return to your lane and then safely return to your lane.
What is the first step when changing lanes?
Turn on your signal
. Check your mirrors. Check your blind spot by looking over your shoulder. If it is safe, change lanes.
What is the most important passing rule?
In general, motorists should only entertain passing if they are
traveling at least 10 mph faster than the car they wish to pass
. Even then, waiting for a safe opportunity is essential. Remember that most situations require passing on the left-hand side of the vehicle in front.
What is passing on the right?
Vehicle Code 21755 CVC is the California statute that makes it an offense for
motorists to pass other vehicles on the right
, if the movement is made in an unsafe manner. … A violation of this law is an infraction and a driver will receive a traffic ticket and one point on his/her driving record.
What lines mean you can pass?
Line Colors
Solid yellow lines
mark the center of a road used for two-way traffic. Broken yellow lines indicate that you may pass if the broken line is next to your driving lane. Two solid yellow lines indicate no passing.
How do you signal before passing?
Signal your intention to exit for
approximately 5 seconds before reaching the exit
. Be sure you are at the proper speed for leaving the traffic lane–not too fast (so you remain in control) and not too slow (so the flow of traffic can still move freely).
Should you pass on the right?
Passing on
the far right or slow lane is legal
, as long as you are not in an exit-only lane before an offramp or crossing over the solid white line onto the shoulder. … But it is unwise to move right to get around slower traffic, as drivers ahead often aren’t expecting such a lane change. But if done safely, it is legal.
Can you pass to the left?
The left lane is normally used to pass other vehicles.
You cannot pass a vehicle on the left
if: … You cannot safely return to the right lane before any oncoming vehicle comes within 200 feet (60 m) of you. You approach a curve or the top of a hill on a two-way road and cannot see around or over it.
What is the correct way to merge lanes?
- Adjust your speed to match the flow of traffic before entering the roadway.
- Yield to drivers on the freeway, but avoid stopping unless absolutely necessary.
- Find a three to four-second gap in traffic to merge. …
- Check for cars around your vehicle before entering a lane.
When preparing to turn you should?
As a good driver, you should get into the proper turn lane and signal at least 100 feet before you turn. Before you make any turn,
you should look both ways for oncoming traffic or pedestrians
.
What are the 3 questions you should ask yourself when deciding to pass?
- Is it legal?
- Is it safe?
- Is it worth it?
What is the most important step in turning the car around?
whats the most important step in turning the car around?
Carefully check traffic in all directions
.
What are yellow signs for?
Yellow: Yellow signifies
WARNING
. Yellow traffic signs stand for slowing down, driving with caution, or a general warning. It may be yellow, or yellow-green with black wording or symbols. This sign warns you about hazards or possible hazards on or near the roadway.
In what 2 situations can you pass on the right?
Code § 46.2-841, drivers can pass in the right lane when another driver has signaled that they are making a left turn, and the driver on the right has room to pass. Drivers can also pass on the right when they
are on a road that is wide enough for two vehicles
, and it has two clear lanes.
What should you do if you start to hydroplane?
- Remain calm and slow down. Avoid the natural urge to slam on your brakes. …
- Use a light pumping action on the pedal if you need to brake. If you have anti-lock brakes, you can brake normally.
- Once you’ve regained control of your car, take a minute or two to calm yourself down.
When you are being passed you should?
When being passed by another vehicle:
Maintain a constant speed
. Speed up. Explanation When being passed, you must yield to the passing vehicle and not increase your speed. Allow the vehicle to safely merge back into your lane.
What do double yellow lines mean?
Double yellow lines mean
no waiting at any time
, unless there are signs that specifically indicate seasonal restrictions. The times at which the restrictions apply for other road markings are shown on nearby plates or on entry signs to controlled parking zones.
What is the three second rule?
Simply leave 3
seconds worth of room between you and the vehicle you are following
. Just watch the vehicle in front of you pass a road sign or other inanimate object on the side of the road and count out “One Massachusetts, Two Massachusetts, Three Massachusetts” before your vehicle passes that same object.
What are the four steps to successful passing?
- Scan for hazards, e.g., oncoming vehicles, vehicles approaching from rear, merging vehicles;
- Check for blind spots;
- Signal your intention and accelerate into passing lane;
- Accelerate quickly to an appropriate speed;
- Concentrate on the path ahead;
- Check the mirror for following cars.
Can you pass on a single dotted line?
If both the dashed and solid yellow lines are present, passing is only allowed by one direction of traffic. If the line on your side of the road is solid, you should not pass, even if the other side is dashed.
Only the dashed side of the road can pass
.
How many seconds should you signal before you begin to pass?
You should signal for at least
three seconds
before passing another vehicle.
What to do when you hear sirens while driving?
- Do not panic. You might feel a little overwhelmed when you hear a siren and traffic starts to move aside but remember to stay calm and don’t panic. …
- Slow down. …
- Indicate. …
- Don’t block roads. …
- Be aware of other vehicles. …
- Do not obstruct traffic. …
- Move to the left. …
- Never run a red light.
What is the first thing to do when you make a three point turn?
- Move as far right as possible, check traffic, and signal a left turn.
- Turn the steering wheel sharply to the left and move forward slowly. …
- Shift to reverse, turn your wheels sharply to the right, check traffic, and back your vehicle to the right curb, or edge of roadway.
What are brown signs on the road?
A tourist sign, often referred to as a brown sign, is a
traffic sign whose purpose is to direct visitors to tourist destinations
, such as historic buildings, tourist regions, caravan or camp sites, picnic areas, sporting facilities or museums.
Who goes first at an intersection?
The first vehicle at the intersection goes through the intersection first
. If base rule doesn’t apply: Farthest Right Goes First. When two vehicles get to the intersection at the same time, the vehicle on the right goes first; it has the right-of-way.
Which lane should you drive in?
Passing on a multi-lane highway
On a multi-lane highway, slower traffic
should use the travel lane furthest to the right
(unless needing the left lane to turn left). This leaves the left lane available for drivers of other vehicles for passing.
Is it illegal to speed up when being passed?
“Since
it is not permitted within the passing or speed limitation laws
, it is not allowable,” Bennett said, with a caveat: “Of course, an officer will most likely use discretion if the person passes without excessively speeding even if they do exceed the speed limit while doing so.”
What are the 3 levels of braking?
Coasting
– Level of braking in which releasing the accelerator stops the vehicle’s forward propulsion. Controlled braking – Level of braking done with sufficient pressure to slow the vehicle. Engine acceleration – Releasing pressure from the brake pedal, allowing the low idle of the engine to move the vehicle forward.
Why is passing on the right bad?
The reason is that passing on the
right is more dangerous
. It congests traffic, especially if other cars are trying to enter or exit the highway on that side. It also forces you to make one or two unnecessary lane changes. Changing lanes is so dangerous that it’s something you want to do as little as possible.
Can you speed while passing?
It varies, but sometimes, when overtaking another car, you are
allowed to exceed the speed limit by 10-15 mph
. … However, some police officers exercise discretion, allowing drivers to exceed the speed limit by a few miles per hour when passing (under certain circumstances).
Where do you look when merging?
- Look in the rearview mirror, then at your driver’s side mirror.
- Glance to see that there is no vehicle in your blind spot (close behind you in the lane that you are merging).
- Check whether someone has slowed or stopped in the ramp/merge lane in front of you.
What are the steps for turning?
- Signal and pull over to the right side of the road.
- Signal left and wait until clear of traffic.
- When clear of traffic and safe to turn, turn left across the road all the way to the curb.
- Turn the steering wheel all the way to the right, and then reverse to the curb.
Should you brake while turning?
You
should always avoid heavy braking or accelerating while turning
as this can cause your car to become unstable. … Only lightly apply the brake or accelerator while on the turn. Corner exit: As you begin to exit the turn and straighten up the steering wheel, you can gradually apply more throttle.
What are 3 common errors when changing lanes?
- Number 1 cause: Motorists weaving in and out of traffic or lane hopping. …
- Solution: Driving on our roads is not a competition. …
- Number 2 cause: The last second lane change. …
- Solution: Focus on your driving so you can plan lane changes well in advance.
How do you make a left turn?
Start the turn in the left lane closest to the middle of the street. Complete the turn, if safe, in either lane of the cross street (shown by the arrows). Use the center
left turn lane
if one is available. A left turn may be made from the other lane, if permitted by signs or arrows.
What is the first thing you should do when planning to make a two point turn?
To change direction by making a two-point turn, you’ll need to use either
a driveway or a cross street
. Check for traffic and slow down as you get ready to turn. Next, pull slowly into the driveway or street, turning the steering wheel as needed.
What are 4 no passing situations?
Passing is illegal and unsafe in the following conditions:
When space is narrowed, and your front zones are closed.
Cross-traffic is present
, even if there are no warning signs. When there is a solid yellow line on your side of the roadway. A school bus is loading or unloading children.
How do you question a decision?
- How long have I been thinking about this? …
- How committed am I to this change? …
- When I think about it, how does my body feel? …
- Am I feeling fear or intuition? …
- Is this decision in line with my long-term goals?
What is the basic speed rule?
California has a “Basic Speed Law” that states “
No person shall drive a vehicle upon a highway at a speed greater than is reasonable or prudent having due regard
for weather, visibility, the traffic on, and the surface and width of, the highway, and in no event at a speed which endangers the safety of persons or …
