The con-rod connects the piston to the crankshaft to transfer combustion pressure to the crankpin
What is the function of connecting?
Connecting Wires. A wire is a flexible strand of metal, usually cylindrical in shape. Wires are used for establishing electrical conductivity between two devices of an electrical circuit . They possess negligible resistance to the passage of current.
What is connecting rod in internal combustion engine?
A connecting rod is a mechanical element that, subjected to tensile or compressive stresses, transmits the articulated movement to other parts of the machine. In an internal combustion engine, this connects the piston to the crankshaft .
Where are connecting rods?
The connecting rod is mounted on the crank pin of the crankshaft with a plain bearing . The connecting rod bearing cap is bolted to the big end. In most cases the connecting rod is hollow or provided with an internal cast oil duct to supply the gudgeon pin with lubricant.
What is the function of crankshaft?
The crankshaft is essentially the backbone of the internal combustion engine. The crankshaft is responsible for the proper operation of the engine and converting a linear motion to a rotational motion .
What is the main function of switch?
A switch is defined as a device that is used for making and breaking of electric current in a circuit . It is used to turn on and turn off daily used equipment like television, washing machine, fan, light, etc.
What is the function of load?
Load affects the performance of circuits with respect to output voltages or currents , such as in sensors, voltage sources, and amplifiers. Mains power outlets provide an easy example: they supply power at constant voltage, with electrical appliances connected to the power circuit collectively making up the load.
What causes a connecting rod to bend?
A connecting rod needs to be strong and durable for the engine to survive. If it is too weak to handle the load of the combustion, then the extreme tensile forces on the connecting rod may bend or even break it.
How do I know if my connecting rod is bad?
- Knocking Noise From Engine. Listen for a knocking noise when the engine is running. ...
- Low Oil Pressure. Check the oil pressure. ...
- Excessive Oil Consumption. Determine if the engine is using excessive oil. ...
- Visual Inspection.
What is the weight of connecting rod?
| Crankshaft radius 48.5 mm | Piston diameter 86 mm | Mass of the piston assembly 0.434 kg | Mass of the connecting rod 0.439 kg | Izz about the center of gravity 0.00144 kg |
|---|
What are three types of connecting rods?
- Plain type rod.
- Fork and blade rod.
- Master and slave rod.
- Billet conrods.
- Cast rods.
- Forged rods.
- Powered metal conrods.
Which way do connecting rods face?
“When assembled, the flanges on the connecting rod and cap should face to the front in the left bank and to the rear in the right bank . Install the piston with the stamped arrow facing forward.”
What is the main function of flywheel?
Flywheel, heavy wheel attached to a rotating shaft so as to smooth out delivery of power from a motor to a machine . The inertia of the flywheel opposes and moderates fluctuations in the speed of the engine and stores the excess energy for intermittent use.
What are the three types of crankshaft?
- Cast Cranks. These types of cranks are around for a long time and are found in a lot of diesel and petrol engine. ...
- Forged Cranks. These are a more robust crankshaft than a cast crank. ...
- Billet Cranks.
What does the crankshaft transfer?
The crankshaft is one of the key components of your engine. It converts the power generated by the reciprocating up-and-down motion of the pistons into rotational power for running the connected machinery .
