The most important signal to agree on is
a signal for “stop”
. If you lose sight of your helper, you should stop immediately and get out of the truck to look.
When backing up why is it important to use a helper?
It is important to use a helper when you are backing
because you will be dealing with blind spots that you cannot see
. Before you start, the two of you should agree on a set of hand signals for “Go” and (most importantly) “Stop.” Take more free practice tests for other CDL topics with our cdl practice tests now!
What 2 special conditions where you should downshift?
What are the two special conditions where you should downshift?
slow down and shift to a speed that you can control without using the brakes hard
. Otherwise the brakes can overheat and lose their braking power.
Why should you back toward the driver side?
1. Why should you back toward the driver's side? Back to the driver's side
so you can see better
. … If you back and turn toward the driver's side, you can watch the rear of your vehicle by looking out the side window.
What is driver side backing?
Sight side backing is
backing toward the left side of the vehicle
. The driver can see the intended trailer path. … Blind side backing is backing toward the right side of the vehicle. The driver has limited visibility and can only see where he/she is going in the truck's rearview mirrors.
What 3 kinds of emergency equipment must you have?
What three kinds of emergency equipment must you have?
Spare electrical fuses, three red reflective triangles, properly charged and rated fire extinguisher
.
What are 2 main things to look for ahead?
What are two main things to look for ahead?
Look for traffic
: Vehicles coming onto the highway, into our lane, or turning. Watch for break lights from slowing vehicles. Look for road conditions.
When using a helper to back you should?
When backing up, it is always a good idea for a driver to use a helper who can watch the vehicle's blind spots. The
helper should stand near the back of the vehicle in a location where they are visible to the driver
.
When backing up which body position should you be in?
your body should
be positioned to the right
, with your arm over the passenger seat. when you're ready to back up you will be prepared to see and have a clear view behind your vehicld. finally, with your foot on the brake, or brake and clutch, slowly proceed backwards.
What are the things to consider when backing a vehicle?
Always go slowly, watching carefully in all directions. To steer the car in reverse,
turn the wheel in the direction
you want the rear of the car to go. Turning the wheel to the right steers the back of the car to the right. Turning the wheel to the left steers to the left.
What is true about double clutching and shifting?
2) Which of these statements about double-clutching and shifting is true? A.
Doubling-clutching should not be used when the road is slippery
. … Double-clutching should be used only with a heavy load.
How far ahead should you look?
Most good drivers look at
least 12 to 15 seconds ahead
. That means looking ahead the distance you will travel in 12 to 15 seconds. At lower speeds, that's about one block. At highway speeds it's about a quarter of a mile.
What happens when you let the air out of hot tires?
You should let air out of hot tires so
the pressure goes back to normal
. … Do not let air out or the pressure will be too low when the tires cool off. If a tire is too hot to touch, remain stopped until the tire cools off. Otherwise the tire may blow out or catch fire.
What are two common backing errors?
Two common errors to aviod when backing are
(1) turning the steering wheel too far
, (2) holding the steering wheel in a turned position for too long.
How many times should you get out and look for a backing maneuver?
Get out of the vehicle when backing in, to physically check your position as often as is necessary to ensure a safe landing, even if it means getting in an out of the vehicle,
every five feet or so
, during the process. Take as much time as is needed to back up safely, without incident.
What is it called when you are driving too fast to see and stop at night?
You are
overdriving your headlights
when you go so fast that your stopping distance is farther than you can see with your headlights. This is a dangerous thing to do, because you may not give yourself enough room to make a safe stop.
