The Chinook
has the smallest footprint of all gas furnaces in the industry and is available in 1-stage, 2-stage, 2-stage ECM and Modulating versions with lowest range capacities from 6,000 BTU up to 120,000 BTU.
How many BTU furnace do I need?
A good rule of thumb for unit sizing is you will want a system that will provide you
40 to 45 BTUs of heat per square foot of your home
. For example: If your home is 3,000 square feet, you'll want a furnace that produces between 120,000 BTUs and 135,000 BTUs.
Can you get a smaller furnace?
With a smaller furnace, you'll find it'll run almost the whole day at a steady rate throughout the whole winter season, keeping your house at a steady 70 degrees. Even a slightly undersized furnace will accomplish the job the majority of the time. … With a smaller furnace, you could have that.
How much does a 40000 BTU furnace cost?
| Furnace Size (BTU) Typical Furnace Cost with Installation* | 40,000 – 60,000 $2,000 – $4,500 | 75,000 – 100,000 $2,500 – $5,900 | 120,000 – 140,000 $4,000 – $8,000 |
|---|
How much does a small gas furnace cost?
For a gas furnace, you can plan to spend
between $1,000 and $2,500
, with the average being closer to $1,200-$1,800 range. For an electric furnace, the range is $400 to $1,200, with average around $800.
Why is furnace installation so expensive?
The number one reason why your furnace installation costs so much is
because you are paying for a long-term investment
. Like we mentioned earlier in this article, your furnace will last up to 15 years or more.
Is it better to undersize or oversize a furnace?
An
undersized furnace will work fine for the majority
of the time, but every once in a while it won't get the house quite as warm as desired. … An over-sized furnace will keep the house warm no matter how cold it gets outside, but it does so at a cost.
How many square feet does a 60000 BTU furnace heat?
A standard that is used by heating and cooling equipment companies is to provide at least 25 to 30 Btu of heat per square feet in the home for a moderate to warm climate. A mid-sized home of
2,000 square feet
would need approximately 50,000 to 60,000 Btu to heat it properly.
How many square feet will a 75000 BTU furnace heat?
Heating a Poorly Insulated Room
A 75,000 BTU heater can heat a room of
between 1,900 and 3,700 square feet
in a cold climate if there is little to no insulation. In more temperate climates the heater fares better, heating an uninsulated room of any size from 2,400 to 4,600 square feet.
How many BTUs do I need to heat 1500 square feet?
A 1,500-square-foot home will require between
45,000 to 90,000 BTUs
.
Is it cheaper to replace furnace and AC together?
While it is always necessary to replace both air conditioning components at the same time (in a split system), it's not always necessary to replace both AC components and the furnace. … Adding a furnace during your air conditioner replacement will cost a lot less, around
$1,000 to $3,000
.
Is a higher BTU furnace better?
In a heat pump or furnace, the BTU number refers to the heat output of the particular unit.
The higher the number the more heat the unit can produce
. … The larger your home, the higher the BTU you will want because it means the heating or cooling unit will be able to produce more heated or cooled air.
How many square feet will a 80000 BTU furnace heat?
80 X 1,000 square feet
= 80,000 BTUs.
How do I pay for a new furnace?
Bank Loans and Credit Cards
: You will be able to pay for a furnace with a bank loan or credit cards if you have sufficient credit or home equity. There is also the option of collateral, which will require you to relinquish a real asset, like a motor vehicle, in exchange for a loan.
How much should a new gas furnace cost installed?
Depending on the system chosen for your home, high efficiency gas furnace installation prices can range between
approximately $2,900 and $6,400
, with an average price of $3,900, including your new equipment, materials and labour.
How much is a new furnace for a 1500 square foot home?
For example, a 700- to 1,500-square-foot home will require a BTU rating between 40,000 and 60,000, which will cost
between $2,000 and $3,000
. A furnace for a home ranging in size from 2,000 and 5,000 square feet will need between 125,000 and 150,000 BTUs and will cost in the neighborhood of $3,300 to $6,500.
