Skip to main content

What Kind Of Transmission Fluid Does A Mustang Take?

by
Last updated on 3 min read

Motorcraft Mercon V® Transmission Fluid is recommended for all automatic transmissions requiring Ford Mercon V® transmission fluid.

What transmission is in a 1989 Mustang?

In 1989, I believe 4-cylinder automatic Mustangs came with Ford’s A4LD transmission , and manuals came with Borg Warner’s TREMEC T-5. Good luck, Redwingiceman! 3 people found this helpful.

What kind of transmission fluid does a 1989 Mustang take?

Valvoline Transmission Fluid Dexron , Mercon 5 Gallon.

What kind of fluid goes in a Ford transmission?

Dexron III/Mercon – This is one of the most common fluids on the market. Most GM and Ford units call for this type of ATF, as well as many imports. If your owners manual recommends any form of Dexron, or any Mercon – other than Mercon V – this is the fluid you want.

What kind of oil does a 89 Mustang take?

Viscosity: 5W-30 (All TEMPS) Capacity: 5 quarts (with filter)After refill check oil level. Torque: 15-25 ft/lbs (Oil Drain Plug)

What fluid goes in a t45 transmission?

use motorcraft mercon-v atf .

What kind of transmission fluid does a 2000 Mustang GT take?

The 2000 Ford Mustang takes the Mercon V fluid in its transmission.

What is the best year Fox Body Mustang?

But the Fox-body that sticks out to us the most, as the best, is the 1993 SVT Cobra —the last model year of the style, and one of the most important Mustangs ever made.

What is the rarest Fox Body Mustang?

1985: For 1985, the rarest by color/body was a Color Code 4M Dark Slate GT hatchback . Only 29 of them were made, making it the winner for that year. 1986: ’86 is also a tie, with two body styles also thrown in the mix. Color code 4E Dark Sage on a LX notchback 5.0 was only done six times.

What are 90s Mustangs called?

SN95 : 1994-2004 Mustangs.

Is it bad to mix transmission fluid brands?

Is it OK to mix synthetic ATF with a conventional and/or synthetic blend ATF? Yes . Synthetic ATF and conventional fluids are 100 percent compatible with each other.

What is the difference between ATF and ATF 4?

ATF +4 is a synthetic fluid for finely-tuned transmissions, so if you use a non-synthetic ATF instead of ATF +4 in a car or truck that calls for it, you could damage the transmission . You may use ATF +4 in most applications that call for older Dexron and Mercon fluids.

Do I have to use Nissan transmission fluid?

The required fluid for all XTRONIC CVT-equipped Nissan models is Nissan CVT Fluid NS-3 . Do not use Automatic transmission fluid (ATF), Manual transmission fluid, or mix this fluid with other fluids, as it may damage the CVT transmission and void the warranty.

Whats the difference between 10w30 and 5w30?

10w30 is thicker than 5w30 because it has a higher viscosity in low temperatures. The engine oil will flow slower than 5w30 during the cold season. Thicker or higher viscosity metal oil has a better seal compared to low viscosity oil. Thicker oil offers better lubrication of motor and engine parts.

What oil does a 91 Mustang take?

Viscosity: 5W-30 (All TEMPS) Capacity: 5 quarts (with filter)Some engines may have 2 oil drain plugs. After refill, check Torque: 15-25 ft/lbs (Oil Drain Plug)

What oil does a Foxbody take?

Choose from our selection of fully synthetic engine oils from Royal Purple in weights such as 5w20, 10w30, 10w40, as well as break in oil to keep your Fox Body properly lubricated. Keep that new oil clean with a high quality filter from Ford Racing or Motorcraft.

Edited and fact-checked by the FixAnswer editorial team.
Charlene Dyck

Charlene is a tech writer specializing in computers, electronics, and gadgets, making complex topics accessible to everyday users.