Most porch ceilings are covered, at the least, with
plywood
—which is the perfect substrate for a high-grade finish like beadboard.
What are porch ceilings made of?
Porch ceiling materials
The four materials commonly used for porch ceilings are
wood, plywood, beadboard, PVC, and composite materials
. Each of these materials has its pros and cons.
How do you protect a wood porch ceiling?
Always start by taping off the ceiling to get a crisp line, and then
apply a coat of primer
: this prevents the wood from soaking up the paint and allows you to get the truest color. Then, apply two or three coats of paint with a roller, using a brush to get into small spaces.
What can you use for porch ceiling?
You can use
plywood
on a porch ceiling, but in such a way that no one will notice it. Go for a board-and-batten approach by covering the seams with 1-by-3-inch fir, cedar or redwood trim. Paint the ceiling a single color or try a two-tone approach by painting the trim a complementary color.
What can I use to cover my porch ceiling?
Most porch ceilings are covered, at the least, with
plywood
—which is the perfect substrate for a high-grade finish like beadboard.
Is pine Good for porch ceiling?
The
southern yellow pine
is an excellent outdoor option because it has a moderate natural resistance to decay. It’s widely available at a moderate price and is ready for painting, staining, or sealing. When being used for exterior use, the wood is pressure treated to give it more defense against the elements.
How much does it cost to replace a porch ceiling?
For a porch about the size of ours (300 sq ft), it would run you about
$780
for the material. We did the labor ourselves, but if you were to get it installed it would be anywhere from $600-$800 dollars for installation.
How do you install a 4×8 sheet of beadboard on a ceiling?
- Measure the ceiling and locate the ceiling joists. You can use a stud finder or just drill holes in the drywall until you hit resistance.
- Cut down the beadboard (including cut outs for lights and vents). …
- Install beadboard. …
- Measure, cut, paint and install border boards. …
- Add trim boards. …
- Caulk, fill nail holes and paint:
What is the underside of a porch roof called?
Soffits
are built from a variety of materials and cover the underside of the roof overhang. Soffits can be non-ventilated or ventilated to allow cooling of the enclosed ceiling space.
How do you clean a porch ceiling?
Sweep away cobwebs and debris from walls and ceilings with a
corn broom
, and wash down the walls with a solution of all-purpose cleaner and water using a large polyester sponge.
Can you use soffit for ceiling?
Many accessories, including trim, soffit and fascia, are available for a vinyl siding job. A soffit is the horizontal surface under a roof overhang. When covering a porch ceiling,
you can use the same materials used to cover a soffit
.
Does Pine need to be sealed?
Because of its combination of soft and harder wood, pine tends to absorb stain at different rates or amounts, which can cause blotching and uneven staining. … To minimize this, it’s
best to seal the wood prior to staining
. Sealing will help prevent the softer wood from absorbing extra stain.
What should I stain my pine ceiling with?
Early American
Is a Classic Favorite. You just can’t go wrong using Early American stain on your pine paneling and trims. Oil-based stains, such as Minwax Wood Finish, enhances pine’s grain and colors and can do it with just one heavy coat.
Does knotty pine need to be sealed?
Pine tends to soak up wood stain unevenly, and knotty pine is especially prone to blotching. The way to circumvent this problem is
to seal the wood before you apply a stain or finish
.
