What Rims Will Fit A Dodge Nitro?

by | Last updated on January 24, 2024

, , , ,
Nitro Bolt Pattern (Lug Pattern) PCD 5×114.3 See Adapters Center bore (hub bore) 72.6 mm Use Hub Centric Rings Thread size (Lug Nut Size) M12 x 1.5 Lug Nuts Stock Rim Sizes Range 16×7.0 – 24×9.5 Hubcaps Tire sizes 225/75 R16 , 235/65 R17 , 235/60 R18 , 235/55 R19 , 245/50 R20 , 265/35 R22

Will Jeep wheels fit on a Dodge Nitro?

Khaki Nitro Nut

08+ Libby wheels should fit the Nitro by all accounts . But just to be sure, they should be 5 X 114.3 lug pattern.

What bolt pattern does Dodge Nitro have?

The nitro comes equipped with a 5×114. 3 Mm wheel bolt pattern.

Are Chevy and Dodge rims interchangeable?

All the Chevy and Dodge 8 lugs rims should interchange as far as the hole spacing goes.

What rims fit 2008 Dodge Nitro?

Tire Rim 225/75R16 101S 6.5Jx16 ET40 2.2 235/65R17 101H 7Jx17 ET40.7 2.2 235/60R18 99H 7Jx18 ET40 2.2 245/55R19 99V 7.5×19 ET40 2.4

Will Dodge Charger rims fit on a Dodge Nitro?

The stock offset of the Charger rim is 18mm and the Nitro is 35mm and the backspacing is more on the nitro too. So the rims will stick out of the wheel well further that could be an issue.

What is the lug pattern on a 2007 Dodge Nitro?

Though sold in both U.S. And European markets, the 2007 Dodge Nitro only uses a single wheel bolt pattern, 5 X114.

What size tires go on a Dodge Nitro?

2009 Dodge Nitro Rim Size Tire Sizes Dodge Nitro Options 16-Inch 225-75-16 SE (B Pkg.)SE (C Pkg.) 17-Inch 235-65-17 SE (C Pkg.)SLT 20-Inch 245-50-20 R/TSLT

What lug pattern is a dodge Charger?

The dodge charger has a 5 x 115mm wheel bolt pattern.

Are Chevy and Dodge 8 lug the same?

On the 3/4 ton the Dodge and Chevy have the same lug pattern – 8 x 6 1/2′′ (8 lugs on a 6 1/2 inch diameter). The 99 and up Fords 3/4 tons have a 8x170mm pattern.

Does Dodge and GMC have the same bolt pattern?

Dodge and GM still use the same pattern unless it's a 2013 and up GM . They have also switched to a different pattern. Keep in mind also that the center bore on a GM is a bit smaller than a Dodge so it would have to be machined to fit the hub.

Is Ford and Chevy 8 lug pattern the same?

92 ford will fit a chevy 8 bolt . Sometime later ford changed to a different bolt circle that is about 5mm bigger diameter. It's different, but not very much...if you are capable of much of anything you can make them fit. Chevy always used a smaller pilot hole, but the larger pilot fits.

What size steering wheel does a Dodge Nitro have?

Dodge Nitro Steering Wheel Size Overview

From 2007 to 2012 the Dodge Nitro has a 15 1/2′′ X 4 1/8′′ steering wheel size.

What lug pattern is a Dodge Magnum?

Magnum Bolt Pattern PCD 5×115 See Adapters Center bore (hub bore) 71.5 Find Hub Centric Rings Thread size M14 x 1.5 Buy Lug Nuts Stock Rim Sizes Range 18×7.5 – 24×10.0 Get Hubcaps Custom rim sizes range R22 – R24
David Evans
Author
David Evans
David is a seasoned automotive enthusiast. He is a graduate of Mechanical Engineering and has a passion for all things related to cars and vehicles. With his extensive knowledge of cars and other vehicles, David is an authority in the industry.