For Rheem, you should look for the
second cluster of digits of the model number
. It will have a number divisible by 6 or 12, and represents the nominal BTU of the system in thousands. A ton of air conditioning equals 12,000 BTU, and 60 divided by 12 equals 5, so the data plate below indicates the system is 5 tons.
How do I know what size AC unit I have?
The easiest place to look is on the AC unit itself. Go outside to the condensing unit and look for a data plaque mounted to the side.
Find the model number
. Within this string of letters and numerals, you should find an even, two-digit number.
How do I read my Rheem AC model number?
On Rheem furnace and air conditioning systems, there's always a letter in the middle of the serial number.
Look at the first two digits after the letter
. The first two numbers are the week that it was manufactured.
Where is Rheem model number?
The data tag or label on your water heater's exterior contains the Rheem water heater serial number. The
serial number is located on the right side of the heater
. There is a label on the upper left side of the unit that contains the serial number.
What is the standard size of an AC unit?
Most residential units range from
1.5 to 5 tons
, or 18,000 to 60,000 Btu. If you've ever wondered what size central air unit you need, or how to size a window AC unit, be aware that square footage is the number-one factor.
How many sq ft will a 2.5 ton AC cool?
Units that are 2.5 tons can cool off
1201-1500 square feet
, etc.
How do I know what size evaporator coil I need?
If the evaporator must move 400 gallons per minute: 14 x 400 = 5,600. Multiply the answer by 500: 5,600 x 500 = 2,800,000. This answer is the evaporator's size, measured in BTUs per hour.
Divide
the answer by 12,000: 2,800,000 / 12,000 = 233.33.
How do you decode a Trane serial number?
This Trane (American Standard) style began use in 2002.
It consists of at least 3 or 4 digits at the beginning of the serial number. From 2002 to 2009 the first digit represents the year. The next two digits represent week. Starting in 2010, the first two digits represent year, and the next two digits represent week.
How do you read AC serial numbers?
In the serial number,
the first letter is the place of manufacturer
. The first pair of numbers is the year, and the second pair of numbers is the week. For Example, Model No.: NAC042AKA5, SN: E031136011 was Manufactured in 2003, Week 11.
How do I read my Carrier air conditioner model number?
Look on the back of your unit, and you'll find the
model number listed on a silver series rating-plate located above the service valve connections
. If your heat pump is geothermal, the model information should be easily found on the front of the unit.
How old is my Rheem unit?
How can I tell the age of a Rheem air conditioner or furnace from the serial number?
Find the letter in the middle of the serial number
. The first two numbers after it are the week of manufacture, and the third and fourth numbers after the letter are the year of manufacture.
How do I find out my SEER rating?
How To Find The SEER Rating. Head
over to your cooling system and look for a yellow and black “energyguide” sticker
, which can usually be located on the side of the condenser. If this sticker is still in tact, it will tell you the Seasonal Energy Efficiency Ratio in large numbers.
How long do Rheem water heaters last?
6-Year Warranty Rheem Water Heater
These Rheem water heaters come with a 6-year warranty on parts & tank, and a 1-year warranty on labor. The 6-year warranty does not mean the unit will only last that long: your water heater, if properly maintained, should have a life-span of
at least 8 years
.
Are all wall air conditioners the same size?
Many models designed for through-the-wall installation come in standardized dimensions. Knowing your exact dimensions and BTU needs will help you find the right model. And don't forget electrical requirements—many larger, older through-the-wall units are 220 volts.
What size room will 5000 BTU cool?
The size of your space determines how much cooling capacity you need. Budget air conditioners range from 5,000 BTU, which can handle
about 150 square feet
, to 12,000 BTU, enough to cover about 550 square feet. Naturally, air conditioners with higher capacities have higher price tags.
What size AC do I need for 1200 sq ft?
| House Square Footage BTUs Needed | 500 – 700 14,000 | 700 – 1,000 18,000 | 1,000 – 1,200 21,000 | 1,200 – 1,400 23,000 |
|---|
