36mm is the number.
The nut part should be 36mm in diameter .
A Must Have for Front End Work
This 36mm axle nut socket is extra deep to fit various axle lengths and can be used to remove or install axle nuts on front wheel drive vehicles.
the lug nuts are 19 mm and the axle nut is 36mm and the lower control arm nut is 17mm.
1 1/4′′ socket fits the 32mm spindle nut: torque to 134 lb-ft.
| Item No. Description Weight | 30410 3.25′′ 8 pt. Axle Nut Socket 2.7 lbs (1.2 kg) | 30411 3.5′′ 6 pt. Axle Nut Socket 2.95 lbs (1.3 kg) | 30412 3.75′′ 8 pt. Axle Nut Socket 3.15 lbs (1.4 kg) | 30413 4′′ 6 pt. Axle Nut Socket 3.35 lbs (1.5 kg) |
|---|
Dorman AutoGrade M24-1.50 Thread Axle/Spindle Nut.
It’s a 4 MM !
36mm is the number.
Dorman AutoGrade M24-1.50 Thread Axle/Spindle Nut.
Rear nut is 30mm .
M22-1.50 Thread Spindle Nut Kit.
RE: Axle nut size.
IT is a 36mm for sure.
There are several manufacturers offering one-piece spindle nut systems. The two most common are the Axilok® nut by Metform (see Figure 1) and the PRO- TORQ® nut by Stemco (see Figure 2). Each of these systems has a specific installation procedure required by the manufacturer to set wheel bearing end-play.
Stretch the tape measure across the nut’s diameter to the flat-side directly across from the one your pulling from. If the nut is metric, count the number of lines on the tape measure to find the measurement. If you count 9 lines, the size is a 9-mm (millimeter) nut.
