Dorman – Autograde – Oil Drain Plug Pilot Point M14-1.50, Head Size 16mm (Part No. 090-053CD)
What size is the oil drain plug on a 2011 Honda Pilot?
Dorman – Autograde – Oil Drain Plug Standard M14-1.50, Head Size 17mm (Part No. 090-033.1)
What size is the oil drain plug on a 2018 Honda Pilot?
Dorman – Autograde – Oil Drain Plug Standard M14-1.50, Head Size 17mm (Part No. 090-033.1)
What size is a Honda drain plug?
Dorman – Autograde – Oil Drain Plug Standard M14-1.50, Head Size 17mm (Part No. 090-033.1)
What size is the oil drain plug on?
Oil Drain Plug Standard M14-1.50 , Head Size 17mm.
How many quarts does a Honda Pilot take?
| Viscosity: 0W-20 (All TEMPS) | Capacity: 5.7 quarts (with filter)After refill check oil level. 5.4 quarts. w/ofAfter refill check oil level. | Torque: 29 ft/lbs (Oil Drain Plug) Install a new washer on the drain bolt. |
|---|
When should I change the oil in my 2011 Honda Pilot?
The recommended oil change interval for the Honda Pilot is every 7,500 miles or every year , whichever comes first.
How much oil does a 2015 Honda Pilot take?
Capacity: 4.5 quarts (with filter)After refill check oil level. 4.2 quarts. w/ofAfter refill check oil level.
How do you get a stuck oil plug out?
You’ll need to spray penetrating oil on the oil plug and leave it to sit for several hours. Then you can take a small hammer and tap counterclockwise to ensure that you are loosening the plug.
How many quarts does a 2010 Honda Accord take?
Capacity: 4 quarts . w/ofAfter refill check oil level. 4.2 quarts (with filter)After refill check oil level.
What size is the drain plug on a 2007 Honda Accord?
Dorman – Autograde – Oil Drain Plug Standard M14-1.50, Head Size 17mm (Part No. 090-033CD)
Are all oil drain plugs the same?
All drain pans are not designed the same which is why different drain plugs are required for different vehicles. ... There is as much engineering going into the oil drain plug as any other part or system on the vehicle. Some vehicles have a reinforced drain plug hole and others do not.
Are all drain plugs the same size?
There is no universal drain plug size , but there are only a couple different sizes in common use. Auto shops do not need to replace the plug, it is almost always reuseable. The disposable part is just a sealing washer or gasket. Most shops probably reuse that instead of replace it.
What size wrench Do I need to remove the oil drain plug?
GearWrench 16mm Magnetic Drain Plug Socket 3/8 Inch Drive 6 Point.
