WHaT Tires Do School Buses Use?

by | Last updated on January 24, 2024

, , , ,


GOOdyEaR® SCHOOL

BUS TIRES FOR WHaT COUnTS THE MOST! School bus tires need all the toughness they can get for curbs and rough roads. That makes Goodyear® 900-Series tires featuring Armor Max Technology an excellent choice for your fleet.

How much does a tire for a school bus cost?

School bus tires will cost anywhere from

$2,000 to 3,000

and can last 10 or more years with proper maintenance, depending on average annual mileage driven.

WHaT size are school bus tires?

Tire sizing is an area where buses have fallen behind the trend to low profile designs. The majority of new buses are still spec’d with conventional

10R22. 5 or 11R22. 5 sizes

.

Can retreaded tires be used on a school bus?

Title 49, Part 393.75 (d) of the Federal Motor Carrier Safety Regulations states “

No bus shall be operated with regrooved

, recapped or retreaded tires on the front wheels.” This is the only regulation on retread tires for bus use however. They are not prohibited for drive tire use.

How big are the wheels on a school bus?

What are the common wheel sizes for busses?

10R22. 5, 11R22. 5

are the most common “standard” sizes on Full-size units.

How long do school bus tires last?

When school bus tires reach a certain age, they can begin to break down from the inside. For this reason, tire manufacturers warn that tires should be replaced after 10 years. Many safety experts say, however, that a tire should be replaced after

six years

, regardless of the appearance.

WHaT is the best bus to convert?

The best school bus for conversion is a short bus like our

Thomas MinoTour Ford E-450

which offers more maneuverability, easier driving and parking, and better gas mileage than it’s larger counterparts.

What is the tire pressure on a school bus?

Air pressure should be

between 60-70 PSI

.

What is the minimum tread depth for a Class C vehicle?

Must have a tread depth of

at least 1mm across 3⁄4 of the breadth

of the tread and in a continuous band around the entire circumference. There should be no cuts, damage or signs of cord visible at the sidewalls.

How much does a school bus tire and rim weigh?

How much does a 22.5 tire and rim weigh? Each tire can weigh

200–250 pounds

, plus the rim itself is another 40–50 pounds of weight.

How much room does a school bus need to turn around?

STANDARD 40′ BUS

A typical inner turning radius of a standard 40-foot bus is

21.5 feet

, which is required to clear the curb. At its tightest turning angle, the rear overhang of the back bumper extends out to 43.3 feet.

What is a Type A school bus?

TYPE A: A Type “A” school bus is

a van conversion or bus constructed utilizing a cutaway front section vehicle with a left-side driver’s door

. … A “type C school bus” also includes a cutaway truck chassis or truck chassis with cab, with or without a left side door, and with a GVWR greater than 21,500 pounds.

How much does a school bus weigh?

You can expect an average school bus weight to be

about 24,387 pounds (11,062 kg)

. When looking at the specs for different school busses, the weight will be typically listed as GVWR.

Why are used school buses so cheap?

Prices of Used Buses

One reason why used buses are so cheap is

that they may not meet government regulations

(discussed below) and thus cannot be purchased by government agencies. Another reason why they are so cheap is that many of them are just purchased for parts.

What to know before buying a bus?

  • Engine — Choose the right-size engine; don’t over-buy. …
  • Mileage — Don’t value the age of a bus. …
  • Leaks — These are easy to spot. …
  • Documentation — A reputable dealer will have the title and service records on file. …
  • Chassis — Look over the paint job for scratches, dents and rust.

How many miles can a bus last?

These standards determine the maximum age and mileage for which a bus should be used. Smith said buses are expected to last about 12-15 years and

250,000 miles

under normal conditions.

David Evans
Author
David Evans
David is a seasoned automotive enthusiast. He is a graduate of Mechanical Engineering and has a passion for all things related to cars and vehicles. With his extensive knowledge of cars and other vehicles, David is an authority in the industry.