When approaching a railroad crossing without mechanical gates or lights, you should:
Cross the tracks as quickly as possible. Slow down to 15 mph and be prepared to stop if necessary
. Stop on the tracks and look both ways.
What is a railroad crossing with no lights signs or gates?
Highway-rail grade crossings that don’t have lights and gates are called “
passive” crossings
because there are no devices that activate when a train approaches. Some crossings have flashing lights, bells and other electric devices that warn of an approaching train.
What should you do if there are no signals at a railroad crossing?
Explanation If there are no signals at an upcoming railroad crossing, you
should slow down and be prepared to stop if you see or hear a train approaching
.
When approaching a railroad crossing in the country without any warning devices are you required to stop?
If a railroad crossing has no warning devices or only a crossbuck sign, you
should slow down
, look in both directions of the track, and listen for a train or railroad equipment. Only proceed with caution across the tracks when it is safe to do so. 2.56 % of our users get this question wrong.
When approaching a railroad crossing you should?
Explanation When you see any signs indicating a nearby railroad crossing, you
should slow down
, look for a train, and be ready to stop. If the red warning lights are flashing or the gate is down, you must stop 15 to 50 feet before the railroad tracks. Do not try to go around the gate.
What do red lights and crossing gates indicate?
active railroad crossing
: These railroad crossings are controlled by flashing red lights and/or crossing gates. crossing gates: These gates prevent vehicles from entering a railroad crossing when a train is approaching.
When may you drive around the gates at a railroad crossing?
You may drive around the gates at a railroad crossing:
Under no circumstances.
When the lights have stopped flashing
.
What is the proper procedure for crossing railroad tracks?
- GET OUT IMMEDIATELY. Evacuate your vehicle. …
- Move away. Walk toward the oncoming train, and away from the tracks at a 45-degree angle. …
- Locate the emergency phone number. …
- Call for help!
What should you do as you approach a Crossbuck?
Crossbuck signs indicate
there is a railroad crossing
. They should be treated similar to yield signs. If a train is approaching, the driver should never try to beat the train across the tracks. Instead, they should stop and wait for it to pass.
When you are approaching a railroad crossing and there are no safety barriers you should?
If you are approaching a railroad crossing that has no safety barrier,
cross the tracks only after checking in both directions for any oncoming trains
. If a train is approaching, come to a complete stop at a safe distance and wait for the train to pass. Never try to outdrive a train.
What should you think when approaching a highway rail grade crossing *?
- Approach with care. Warn others that you are slowing down. …
- Prepare to stop. …
- Look both ways and listen carefully. …
- If it won’t fit, don’t commit. …
- Look again. …
- Cross tracks with care. …
- Keep going once you start, even if lights start to flash or gates come down.
When approaching an intersection What should you do?
- A driver who approaches an intersection must yield the right-of-way to traffic that is in the intersection. …
- If drivers approaching from opposite directions reach an intersection at about the same time, a driver that turns left must yield to traffic that moves straight or turns right.
When approaching a railroad crossing you should quizlet?
Never proceed until you are certain it is safe to do so. What should you always do when approaching a railroad crossing? When required to stop, you should do so
within 50 feet, but no less than 15 feet from the nearest rail of the crossing
.
What should you do when you are approaching intersections crosswalks and railroad crossings?
9. At intersections, crosswalks, and railroad crossings, you should always: –
Stop, listen, and proceed cautiously
.
When approaching and driving through a construction zone you should *?
When approaching and driving through a construction zone you should:
Slow your speed and adjust your vehicle’s position
.
How should a motorcyclist cross railroad tracks?
A rider should cross railroad tracks
by traveling straight across them and remaining in their lane
. It may be tempting to cross tracks at a ninety degree angle; however, that may cause the rider to travel into the opposite lane. Last, one should never ride the center line or the berm of the road.
When railroad lights are flashing red you must?
When you approach a railroad crossing and you see flashing red lights, this means that
either a train is on the tracks or a train is approaching
. In either instance, you should stop. Not only is it unlawful to cross the tracks while the red light is flashing, it also could prove to be fatal.
When approaching an intersection that is controlled by a flashing red traffic signal you must?
Explanation A flashing red traffic light means the same thing as a stop sign. When arriving at an intersection with a flashing red light,
you must come to a full stop and proceed
when it is safe to do so.
When approaching a traffic light the spot where you can no longer stop safely is?
An intersection which has neither traffic signs nor traffic signals is a
__ intersection
. You intend to turn left at an intersection. Others will yield the right of way to you for a left turn only when your left turn arrow is __. Which two clues are clear indicators that you are approaching an intersection?
What actions should you take when approaching?
Explanation When approaching an unmarked railroad
crossing, slow down and be prepared to stop
. Before you cross, be sure that no trains are approaching from either direction on any track. If you see or hear a train coming, stop at a safe distance from the nearest track and wait to proceed until after the train passes.
What type of zone is a railroad crossing?
What type of zone is a railroad crossing?
A closed zone
.
What steps will you take when crossing railroad tracks quizlet?
When you come to any railroad crossing you
should always slow down
. You should stop on railroad tracks only if the vehicle ahead of you has stopped. Always wait for the vehicle ahead of you to clear the tracks before you start across. Never stopped on the railroad tracks.
How do you cross a railway line safely?
Cross railroad tracks only
at designated pedestrian or roadway crossings
and obey all warning signs and signals. Always stop, look both ways, and listen for trains before crossing the tracks.
What should you do if the warning lights at a crossing begin to flash after you have started to cross the tracks?
If the warning lights at the crossing begin to flash after you have started across the tracks with your rig,
keep going
. Do not back up. Passive signs (not electronic) and Active traffic control devices (gates, lights, bells) are installed along the roads near the railroad tracks to regulate, warn and guide traffic.
What is a Crossbuck at a railroad crossing?
Crossbuck signs are found at highway-rail intersections. They are
yield signs
. You are legally required to yield the right of way to trains. … When the road crosses over more than one set of tracks, a sign below the Crossbuck indicates the number of tracks.
What should a driver do when approaching a traffic control signal that is not in operation?
Explanation When traffic control signals are not working, a
driver must always treat the intersection as an all-way stop and come to a complete stop
, unless otherwise directed by law enforcement. The driver must then look and yield the right-of-way before entering the intersection.
When approaching a railroad crossing you must stop at least blank and no farther than blank from railroad tracks?
Stop before the railroad tracks and look both ways before proceeding. When approaching a railroad crossing while driving a bus, you must stop
between 15 and 50 feet
from the nearest track to look and listen for any approaching trains.
When approaching a railroad crossing with flashing lights you must quizlet?
Flashing red lights, lowered crossing gates and/or a bell at a railroad crossing indicate that
you must stop, at least 15 feet (5 m) from the tracks
. Do not go across the tracks until the lights and bell have stopped and the crossing gates are completely up.
When you approach a railroad crossing that a train is approaching you must stop your vehicle?
Stop
at least 15 feet
, but no more than 50 feet, from the nearest track when the crossing devices are active or a person warns you a train is coming.
When approaching a railroad crossing you must stop at least and no farther than?
Stop, look and listen – Stop no
closer than 15 feet and no farther than 50 feet from the crossing
. Open windows and doors, look both ways carefully and look and listen for a train.
When approaching a railroad crossing you must stop at least and no farther than?
A stop line may be painted on paved roads in advance of the intersection and identifies the safe place to stop, if a train is approaching. If there isn’t a stop line the driver must stop no closer
than 15 feet and no farther than 50 feet from the closest rail
.
What are five things to remember when you approach a railroad crossing?
- The cross buck sign means yield. Trains must be given the right-of-way at all times! …
- Always expect a train. …
- Trains cannot stop quickly. …
- Do not try to beat the train. …
- Never drive around lowered gates. …
- Do not get trapped on the tracks. …
- Look for a second train.
What are the rules at a railroad crossing?
Cross tracks only at designated pedestrian or roadway crossings.
Do not walk, run, cycle or operate all terrain vehicles (ATVs)
on railroad tracks, rights-of-way or through tunnels. The only safe place to cross railroad tracks is at a designated public crossing. Do not cross the tracks immediately after a train passes.
When approaching an intersection bridge or railroad crossing you should?
To avoid accidents, a defensive driver should: Stay alert and look for trouble spots. When approaching an intersection, bridge or railroad crossing, you
should never drive on the left side of the roadway within: 100 feet
.
When approaching a green light what should you do?
Explanation When approaching an intersection with a steady green traffic light,
yield to pedestrians in the crosswalk and vehicles still in the intersection
. You may continue driving, but should approach the intersection at a speed that will allow you to slow down and stop if the light changes before you get there.
When approaching an intersection for a left turn you should approach the intersection?
If a driver traveling straight approaches an intersection where another driver is already making a left turn,
they must let that vehicle complete its turn before entering the intersection
. Drivers entering a traffic circle or rotary must yield to drivers already in the circle.
When approaching railroad tracks should I train?
Think Train!” to encourage people who are near railroad tracks to expect a train
at any time
. “The train does not always run at a set schedule, and it is hard to predict,” Snipe said. “People think certain tracks are out of service. You know a train can come at any time, so we tell people to look, listen and live.”
When approaching a railroad crossing with no warning devices and are unable to see 400 feet down the tracks in one direction the speed limit is?
You are approaching a railroad crossing with no warning devices and are unable to see 400 feet down the tracks in one direction. The speed limit is:
15 mph
.