Stay alert and look for trouble spots. When approaching an intersection, bridge or railroad crossing, you should
never drive on the left side of the roadway within: 100 feet
.
When approaching an intersection bridge or railroad crossing you should never drive pass on the left half of the road when within?
Do not pass:
Within 100 feet
of an intersection bridge, tunnel, railroad crossing, or areas that could cause concern.
When approaching an intersection bridge or railroad crossing you should never drive on the left half of the roadway when within quizlet?
When approaching an intersection, bridge, or railroad crossing, you should never drive on the left half of the roadway when within:
100 feet
.
When approaching a railroad crossing with flashing lights you must quizlet?
Flashing red lights, lowered crossing gates and/or a bell at a railroad crossing indicate that
you must stop, at least 15 feet (5 m) from the tracks
. Do not go across the tracks until the lights and bell have stopped and the crossing gates are completely up.
When approaching an intersection for a left turn you should approach the intersection?
If a driver traveling straight approaches an intersection where another driver is already making a left turn,
they must let that vehicle complete its turn before entering the intersection
. Drivers entering a traffic circle or rotary must yield to drivers already in the circle.
When approaching a railroad crossing you should?
Explanation When you see any signs indicating a nearby railroad crossing, you
should slow down
, look for a train, and be ready to stop. If the red warning lights are flashing or the gate is down, you must stop 15 to 50 feet before the railroad tracks. Do not try to go around the gate.
When approaching an intersection where the traffic signal is out you should?
TRAFFIC SIGNAL BLACKOUT—If all traffic signal lights are not working because of an electrical power failure,
you must stop at the intersection
and then proceed when you know other turning and approaching vehicles, bicycles, or pedestrians have stopped.
When approaching an intersection you should never pass when within?
Drivers must not pass
within 100 feet
of a railroad crossing or intersection. The precise distance at which passing is prohibited may differ in your state, so check your driver manual for local information. If no distance is stated, sticking to the “not within 100 feet” rule is advisable.
When approaching an intersection one way to avoid a crash is to?
Slow down
when approaching an intersection; scan the situation well in advance. Always assume that there is a crosswalk on the corners of the intersection. Watch for any pedestrians in the crosswalk before entering an intersection.
When approaching an intersection with a bicyclist the motorist yields the right of way?
When riding straight across an intersection, a biker has the right of way
as soon as the light turns green
. If the car to his left wishes to turn right, the vehicle must wait for the bike to pass before attempting the turn, just as he would have to wait for a pedestrian in the crosswalk.
When approaching a railroad crossing with flashing light you must?
Flashing red lights at a railroad crossing means
you must stop
. Stop at least 15 feet, but no more than 50 feet from the nearest track.
When approaching a railroad crossing with no signal lights or crossing gates you should?
Explanation
Always be prepared to yield to any oncoming trains
before crossing railroad tracks, particularly if there are no lights or gates controlling the crossing. Never start to cross the tracks until there is room for your entire vehicle on the other side of the tracks.
When approaching a railroad crossing you should quizlet?
Never proceed until you are certain it is safe to do so. What should you always do when approaching a railroad crossing? When required to stop, you should do so
within 50 feet, but no less than 15 feet from the nearest rail of the crossing
.
When approaching a left hand turn its best to keep your left wheels?
For left turns from a two-way road into a two-way road, the manual says to approach the turn with
your left wheels as close as possible to the center line
. (If it is a rural area where no lines exist, stay as close as possible to the center of the roadway).
When completing your left turn you may turn into quizlet?
On a left turn or U-turn, turn
into the travel lane farthest to the left going in your direction
. This way, you will cross the fewest lanes of traffic. After checking traffic to the rear and signaling, move into the turn lane (if there is one) or the travel lane farthest to the left.
When approaching an intersection where the traffic light changes from green to yellow you should?
Speed up to get through the intersection before the red light appears. Explanation When approaching an intersection with a solid yellow traffic light,
slow to a stop before entering the intersection
, if it is safe to do so. If you can’t stop safely, drive carefully through the intersection.
What should a driver do when approaching a traffic?
When traffic control signals are not working, a
driver must always treat the intersection as an all-way stop and come to a complete stop
, unless otherwise directed by law enforcement. The driver must then look and yield the right-of-way before entering the intersection. 5.34 % of our users get this question wrong.
When approaching and driving through a construction zone you should?
When approaching and driving through a construction zone you should:
Slow your speed and adjust your vehicle’s position
.
What should you do when your approaching traffic lights?
Keep your speed down and be prepared to stop
. If the lights are showing green, don’t speed up to ‘beat the lights’. Be ready to stop, especially if the lights have been green for some time.
When turning Should you give proper?
You must give a proper turn signal
at least 100 ft (200 ft in some states, e.g.,Indiana)
before turning or changing lanes. Consult your state’s Drivers handbook for details. If your vehicle’s turn signals do not work, use hand signals as shown in the next slides.
When approaching an intersection with a pedestrian crossing the street carrying a white cane with a red tip you must?
When a pedestrian is crossing a street or highway guided by a dog or carrying a white cane (or a white cane with a red tip),
vehicles must come to a complete stop
.
Why is intersection safety important?
The U.S. Department of Transportation maintains that the last few years saw an average of approximately 50 percent of traffic injuries and 25% of traffic deaths occurring at intersections. … Focusing on intersection safety is
an integral part of reducing both injuries and deaths
.
What should you do to avoid being in a rear end collision?
- Leave more space between you and the car in front of you. …
- Check your mirrors often. …
- Focus on driving, don’t be distracted. …
- Brake slowly. …
- Make sure your brake lights work. …
- Pay attention to the driving conditions. …
- Keep your view clear.
When an emergency vehicle is approaching you should?
- Pull over to the edge of the roadway, clear of intersections, and stop.
- Remain there until the emergency vehicle has passed. …
- Keep a foot on the brake so the brake lights let emergency vehicle drivers know you have stopped.
What should a motorist do when approaching a bicyclist?
A motorist approaching a bicyclist should:
Proceed as usual
. Swerve into the opposite lane. Exercise extreme caution. Explanation Drivers should reduce their speed as they pass bicyclists, as air movement from a passing vehicle can easily affect a bicyclist’s balance.
When should you yield your legal right of way quizlet?
You must yield the right-of-way to
the vehicle that reached the intersection first
. When more than one vehicle reaches the intersection at the same time the vehicle on the left must yield the right-of-way and allow the vehicle on the right to go first.
When approaching a railroad crossing following a school bus you should?
Bring the bus to a full and complete stop before crossing any track, whether or not the bus is carrying passengers.
Stop the bus within not less than 15 feet or more than 50 feet from the rails nearest the front of the bus
.
What should you think when approaching a highway rail grade crossing *?
- Approach with care. Warn others that you are slowing down. …
- Prepare to stop. …
- Look both ways and listen carefully. …
- If it won’t fit, don’t commit. …
- Look again. …
- Cross tracks with care. …
- Keep going once you start, even if lights start to flash or gates come down.
When being approached by an emergency vehicle at an intersection a motorist should always?
When an emergency vehicle is on the road and has it’s lights flashing, a motorist should steer to the extreme right of the roadway, stop and wait for the vehicle to pass. Afterwards, the motorist should
keep about 300 feet behind a signaling emergency vehicle
.
Who among the different types of motorist will you give priority to right of way?
2)
If two cars get to an intersection at the same time
, the one to the right has right of way. So both of you reach the intersection simultaneously. If the other driver is crossing from the right side, you must give way.
Which of the following actions should you take when approaching a railroad crossing that has the gates lowered with signals flashing and bells ringing?
Motorists must stop at least 15 feet from railroad crossings
when… – there are flashing lights, bells or flag signals. Lowering gates, or gates that have already been lowered, indicate a train is coming, and a motorist must stop. Never attempt to cross until the gates have been raised and lights have stopped flashing.
When you prepare for a right turn should you remain as close to the center of the lane as possible?
As you prepare to turn,
reduce speed
and stay as far to the right as possible. Begin the turn in the lane nearest to the right-hand curb and end the turn in the lane nearest the right-hand curb. Give turn signal. Yield to pedestrians who may be crossing your path.
