Explanation When exiting a highway, you should get into the exit lane well in advance. Do not begin to slow down
until after you have moved into the exit lane
.
When exiting a highway you should slow down and do what?
Use the deceleration lane and the exit ramp
to slow down when leaving the highway. Be sure you obey the speed advisory sign on the exit ramp. Be ready to stop or yield at the end of the ramp. If you miss your exit, DO NOT stop, back up, or try to turn around on the highway.
When should you slow down on the highway?
If you are travelling at a speed which does not permit you to see an object in time to stop, you are over-driving your headlights. SPEED On the highway,
if road conditions are poor, or visibility is reduced
, you should slow down to a speed that will allow you to stop within the distance you can see.
When preparing to exit a highway you should?
When preparing to exit the freeway, you
should signal for at least 5 seconds before reaching the exit
. One-handed steering is best used when backing up without making full left or right turns. You should reduce your speed by half when the road is packed with snow.
How do you leave a highway?
Wait until you are in the deceleration lane. Then slow gradually until your speed matches the posted
exit ramp
speed. If you miss the exit ramp, never turn around or back up. Go to the next exit; get back on the freeway in the opposite direction and return to the exit you want.
When you have to slow down or stop you should?
When slowing down behind another vehicle, you should:
Apply your brakes early as
a signal to the other vehicles behind you.
At what speed should you enter the freeway?
At or near the speed of traffic on the freeway.
Five to 10 mph slower than
the speed of traffic on the freeway. The posted speed limit for freeway traffic. Explanation When merging onto a freeway, you should enter at or near the speed of traffic.
Do you slow down when merging?
The bottom line is that you have to prepare for a merge. … Instead of increasing speed,
drivers have a tendency to actually slow down before merging
which is a big mistake. More crashes actually happen during merging than during passing. Once on the freeway, adjust your speed to keep a cushion of space around your car.
Where should you begin to slow down when exiting an expressway?
Answer: When exiting the freeway,
the off-ramps
provide more than adequate space for a driver to slow down to surface street speeds. A driver should signal his intention to exit the freeway (at least 100 feet before the movement), move onto the exit ramp and then begin to slow for the transition to slower speeds.
When should you start reducing speed?
Did You Know? You should reduce your speed
by 1/3 on wet roads
and by 1/2 or more on snow packed roads (i.e., if you would normally be traveling at a speed of 60 mph on dry pavement, then on a wet road you should reduce your speed to 40 mph, and on a snow-packed road you should reduce your speed to 30 mph).
What should you do when you reach the highway?
What do you do when you reach the highway?
Yield to vehicles on the highway
.
What four steps should you follow when exiting an expressway?
What steps should you take when exiting an expressway? *
At least 1/2 mile from exit signal and make lane change to position 3
when safe to do so. *Flash brake lights to warn drivers behind you. Keep a safe distance, monitor you front and rear zones.
When you are preparing to exit a highway you must signal before you reach the exit ramp?
To exit an interstate highway,
turn your right turn signal on
before reaching the exit ramp. Merge into the exit lane and begin to slow your vehicle as you travel down the exit ramp before coming to a complete stop at the end. Most interstate highways have both a maximum and a minimum speed limit.
How do exits work on highways?
Exits are numbered from
south to north on north-south routes
and west to east on east-west routes. Each exit number is determined by the number of miles it is from the beginning of the route. For example, on Interstate 5, exit No. 1 will be just north of the Mexican border.
What are 3 things you should do to exit a freeway safely?
- Plan ahead and merge into the lane closest to your destination exit. Keep reading the guide signs for your destination exit and remaining distance. …
- Signal when changing lanes. …
- Follow the freeway exit’s speed limit.
Who slows down when merging?
In addition to the law, merging traffic is better able than
through traffic
to slow down and wait safely, since the traffic behind them will also be slow. Through traffic is surrounded by high-speed vehicles, and if they’re forced to suddenly stop, the risk of getting rear-ended is much higher.
Do you speed up when you merge?
You accelerate
until you’re at such a speed that you can smoothly enter into traffic
without affecting flow. That may mean 45mph if that’s what the prevailing traffic is doing in the right lane. It may mean 5mph if that’s what the prevailing traffic is doing.
What should you check for when you leave an expressway?
Explanation When exiting an expressway, it is important to be
alert to other traffic moving nearby
. Be sure to look at the new posted speed limit and check your speedometer. It is unlikely that you will be exiting onto a road with a speed limit as high as the one found on the expressway.
Who has the right way when exiting the freeway?
Most states give the right
of way to the vehicle that is traveling on the highway. The vehicle entering must yield to those vehicles, but there are a few states that indicate both drivers must attempt to adjust their speed and location to avoid a collision.
When exiting a freeway you should signal your intention to exit for approximately how many seconds?
Signal, look over your shoulder, and change lanes one at a time until you are in the proper lane to exit the freeway. Signal your intention to exit for
approximately 5 seconds
before reaching the exit.
How close to the speed limit should you go?
On a road with one lane in each direction, going 10-mph is legal, but can impede the flow of traffic. If it’s safe to do so,
drive closer to the max speed limit
. If you’re driving so slow that a line of more than five cars has queued behind you, it’s best to pull over to the shoulder and allow the drivers to pass you.
When driving on a wet road you should?
When driving on wet roads, you should:
Drive slightly faster than the speed limit
. Reduce your speed by five to ten miles per hour. Stay close to the vehicle ahead. Explanation When roads become slippery, you should reduce your speed by five to ten miles per hour.
Why do you need to continuously slow down and stop in a city environment?
Why do you need to continuously slow down and stop in a city environment?
Because of drastic changes in traffic flow and numerous traffic lights
.
What is the name of the lane that is used to exit a highway?
The
left lane
is commonly referred to as the “fast lane”, but that is not an accurate description of the lane’s purpose. The left lane is the designated passing lane, however, vehicles in the left lane must obey the posted speed limits. A common problem arising from misuse of the left lane is speeding and tailgating.
When approaching a tollbooth you should expect?
- Look ahead for tollbooth signs.
- Slow down in advance.
- Be prepared for slow or stopped traffic near the tollbooth; give yourself adequate space to stop.
- Use the tollbooth lane designated for your kind of vehicle. …
- Only use lanes that are marked as open (green lights or sign).
What are the two parts used when exiting an expressway?
If the exit is missed, do not stop and/or back up on the expressway. The exit has two components:
Deceleration lane
– area where speed can be reduced to exit safely • Exit ramp – these may be level or sharply curved, uphill or downhill. Be sure to adjust speed for ramp speed limit.
When driving slower than the rest of the traffic in which lane should you be driving?
If you are driving slower than other traffic on the road, you should be driving in
the rightmost lane
. When slow traffic keeps to the right, it helps maintain a safe, normal flow of traffic. It also makes it easy for other vehicles to pass you on the left, which is generally safer than passing on the right.
