Serpentine belts typically last
around five years or up to 100,000 miles
. Obviously, if signs of wear and tear are clearly visible on the belt, it should be replaced immediately.
How long do Honda serpentine belts last?
Generally, serpentine belts last
around 5 years
to be 100,000 kilometers before replacement becomes necessary. Belt wear is difficult to see by just looking at the belt. Our Honda-trained technicians can measure the depth of the grooves in the underside of the belt to determine whether the belt should be replaced.
When should a Honda Fit serpentine belt be replaced?
Typically, belt manufacturers recommend belt replacement at
90,000 miles
. However, the belt must be inspected for wear or damage at regular intervals prior to this high mileage. Squealing noise, belt slippage, visible belt damage.
How do I know if my V belt is worn out?
- Squealing noise from the front of the vehicle. If you notice a squealing noise coming from the front of your vehicle, it could be from the serpentine belt. …
- Power steering and AC not working. …
- Engine overheating. …
- Cracks and wear on the belt.
What happens if my serpentine belt breaks while driving?
A broken serpentine belt can lead to a
sudden loss of power steering
in your car, making your steering very difficult to turn. … A broken serpentine belt causes the water pump to stop circulating coolant through the engine’s cooling system, causing it to overheat.
What needs to be replaced when replacing a serpentine belt?
The bearings are sealed and cannot be relubricated, so if an idler pulley is noisy or wobbling it needs to be replaced. Changing a serpentine belt usually requires a
long handle breaker bar or special tool
to rotate the belt tensioner so the belt can be slipped off the pulleys.
How much does it cost to replace a serpentine belt?
A typical serpentine belt start at around $25 and goes up to $75 at most. If you know some car repair basics, you could change the belt yourself, and it may save you paying labor charges somewhere between $75 and $120. All together, you’re looking at
around $100 to $195
to replace your serpentine belt.
Is a serpentine belt the same as a timing belt?
Timing Belt. Don’t get confused—
a serpentine belt is not the same thing as a timing belt
. … The timing belt is located inside the engine and keeps the crankshaft and camshaft in sync. This ensures that the engine intake and exhaust valves open and close in time with the pistons so the engine runs smoothly.
How much does it cost to replace a timing belt on a Honda Fit?
But on average, Honda owners pay somewhere
between $470 and $630
as their Honda timing belt replacement cost. That includes the necessary parts, which will often run between $100 and $200. It also includes the labor associated with replacing a timing belt, which can cost upwards of $500 in some cases.
Will a new serpentine belt improve performance?
Not really
. All of your accessories(power steering, air-conditioning, etc.) put drag on the engine; which is why reducing the load from accessories (via under-drive pulleys or simply disabling the accessories) can help with performance.
How long can I drive with a bad serpentine belt?
How long will my car run with a broken serpentine belt? There are a few variables involved in the answer, but it should be able to run
between 20 to 90 minutes
. If it is a hot summer day, your engine can overheat very quickly without the coolant being pumped through the radiator.
What does it sound like when a serpentine belt goes bad?
Think you might have a bad serpentine belt? A telltale sign is that the engine squealing comes from the front of the vehicle and that it persists. Belt squeaking is also especially pronounced when accelerating, on startup, and when making a U-turn. The noise is loud and sounds like
a squeal, loud chirp, or squeak
.
Can you replace a serpentine belt yourself?
You
can replace a serpentine belt with ordinary hand tools
. But we don’t recommend it. The spaces are often tight and the belt-driven devices difficult to reach. … The belt placement tool allowed us to remove and properly place the new belt without reaching down into the pulley area.
What would cause the serpentine belt to break?
Serpentine belts can fail in a few different ways. … This is usually the result of a belt in poor condition, or a problem with one of the accessory components being driven by the belt.
A failed bearing in a pulley being driven by the serpentine belt
will also cause the belt to break.
Can a serpentine belt cause transmission problems?
A Broken Serpentine Belt Could Ruin the Transmission
If your car’s serpentine belt breaks,
the transmission could be damaged
. Almost as soon as your car’s serpentine belt breaks, the engine will begin to overheat. Without the belt running, the water pump won’t be able to adequately cool your engine.
Can a serpentine belt dry rot?
Cracking (dry rot) in the grooves – more
than
one crack per inch – or any fraying along the edges point towards an old belt that has absorbed a lot of heat and needs to be replaced. Lastly, long term contamination of the belt from leaking oil or coolant should be addressed with a new belt.
