When Using A Fire Extinguisher How Far Should You Stand Away From The Fire?

by | Last updated on January 24, 2024

, , , ,

Aim low. Standing

up to 10 feet away

from the fire. Point the extinguisher discharge horn at the front edge of the base of the fire (the lowest point of the fire nearest you). Remember – extinguishers are designed to be operated in an upright position.

How far away should you stand from a fire when using an extinguisher?

Stand

6 to 8 feet away

from the fire and follow the four-step PASS procedure. If the fire does not begin to go out immediately, leave the area at once. Always be sure the fire department inspects the fire site. PULL the pin out: This unlocks the operating lever and allows you to discharge the extinguisher.

When using a fire extinguisher How far should you stand away from the fire 8 feet?

According to FEMA (Federal Emergency Management Agency), it’s recommended that you stand 8 feet away when extinguishing a fire. The correct answer is D,

Pull, Aim, Squeeze, Sweep

.

When should you not use a fire extinguisher?

  1. The fire is too big or would require more than one fire extinguisher.
  2. Fires involving escaping gases, high voltage electrics.
  3. The evacuation route is obstructed.
  4. There are high levels of smoke.
  5. The area is too hot.
  6. You have not been trained.

What does the A stand for in pass fire?

It’s easy to remember how to use a fire extinguisher if you can remember the acronym PASS, which stands for

Pull, Aim, Squeeze, and Sweep

. Pull the pin. This will allow you to discharge the extinguisher. Aim at the base of the fire.

How do you close a fire extinguisher after use?

A: Aim the

extinguisher nozzle on the hose low

, toward the base of the fire. S: Squeeze the handle or lever to discharge the extinguisher. S: Sweep the nozzle back and forth. Keep the fire extinguisher aimed at the base of the fire and move it from side to side until the flames are extinguished.

Which part of fire extinguisher should pull first to unlock it?

For an easy-to-remember 4-step process to operating a fire extinguisher, learn the PASS system:

Pull the pin

while holding the extinguisher away from you to unlock the mechanism. Aim low toward the base of the fire. Squeeze the lever slowly.

Which part of fire extinguisher should Amit pull first to unlock it?

Knowing how to use a fire extinguisher could save your life in an emergency. The key to putting out a fire with an extinguisher is to use the PASS strategy: Pull

the pin

, Aim the hose, Squeeze the lever, and Sweep the hose.

Is it a good idea to keep a fire extinguisher?

Yes, provided you know when and how to use it. Fire extinguishers can be a small but important part of the home fire safety plan.

They can save lives and property by putting out a small fire or suppressing it until the fire department arrives

. … You’ll also want to make sure that the fire is confined to one area.

Why is it a bad idea to use a fire extinguisher on a person?

Proper use of fire extinguishers is generally safe; however, there is some risk for mild respiratory, skin, or eye irritation. Use in areas with poor air flow,

use with intent to harm someone

, or intentional inhalation of fire extinguishers can produce serious toxicity and would require medical evaluation.

What should you not do with a fire extinguisher?

  • Don’t ignore the instructions on the fire extinguisher. …
  • Don’t use the wrong type of extinguisher for the wrong type of fire. …
  • Don’t rush towards the first unprepared. …
  • Don’t stand too close to burning liquid when attempting to extinguish it.

What is a Type D fire?

Class D fires involve

combustible metals, such as magnesium, titanium, and sodium

. Extinguishers with a D rating are designed to extinguish fires involving combustible metals. Note: Common extinguishing agents may react with a combustible metal fire causing the severity of the fire to increase.

What are the 4 race procedure in a fire?

  • RACE: Remove, Alarm, Confine and Extinguish or Evacuate. This easy to remember acronym is our University procedure in the case of a fire. …
  • Remove. Remove everyone from the area. …
  • Alarm. The fire alarm pull station shall be activated call 911 to report fire. …
  • Confine. …
  • Extinguish or Evacuate.

What should you never use to put out an electrical fire?

If an electrical fire happens—and it is small—you may be able to fight it. First, disconnect the electricity if you can do so safely. Importantly,

never use water

to put out fires involving charged electrical equipment. Instead, use a Class C fire extinguisher; an ABC fire extinguisher should be in every home.

What are the 4 types of fire?

  • Class A – fires involving solid materials such as wood, paper or textiles.
  • Class B – fires involving flammable liquids such as petrol, diesel or oils.
  • Class C – fires involving gases.
  • Class D – fires involving metals.
  • Class E – fires involving live electrical apparatus. (

Do fire extinguishers expire?

Even

if there’s no expiration date

, it won’t last forever. Manufacturers say most extinguishers should work for 5 to 15 years, but you might not know if you got yours three years ago or 13. … If it falls anywhere else, the extinguisher is unreliable and should be serviced or replaced.

David Martineau
Author
David Martineau
David is an interior designer and home improvement expert. With a degree in architecture, David has worked on various renovation projects and has written for several home and garden publications. David's expertise in decorating, renovation, and repair will help you create your dream home.