When Using Ground Viewing You Are Not Looking For?

by | Last updated on January 24, 2024

, , , ,

When using ground viewing you are not looking for:

the color of a vehicle to your side

. One reason to develop the habit of checking behind you using your mirrors is: To help you avoid collisions when conditions changes suddenly.

When you are driving blind areas include those areas you can not see when?

These blind spot areas include: directly in front, directly behind and along each side—especially on the right side. If you

cannot see the truck driver's reflection in his or her side mirror

, you are in the truck driver's blind spot and they cannot see you.

Which sense is most critical to safe driving AAA?


Vision

is particularly important because it is the primary sense used in . About 90 percent of the information required for safe driving relates to vision. Cognition and physical ability are other key factors in driving.

Which sense is most critical to safe driving quizlet?

The most important sense you use in driving is

your sense of hearing

. Your field of vision is what you see looking straight ahead and at an angle to your left or right. Your field of vision is what you see looking straight ahead and at an angle to your left or right. Color blind people can drive safely.

When you need to slow down or stop you should?

Signal When You Slow Down


Always slow down as early as it is safe to do

so. If you are going to stop or slow down at a place where another driver does not expect it, tap your brake pedal three or four times quickly to let those behind you know you are about to slow down.

Which of the following is most important when judging clearance for breaking?

When of the following is most important when judging clearance for braking:

vehicle type

.

When should you check your blind spot?

  1. Before you pull out from the kerb.
  2. Before you parallel park or leave a park.
  3. Before and during a three-point turn or U-turn.
  4. Before merging with other traffic.
  5. Before changing lanes (including when you pass or overtake another vehicle)

When preparing to turn you should?

As you prepare to turn, reduce speed and stay as far to the right as possible. Begin the turn in the lane nearest to the right-hand curb and end the turn in the lane nearest the right-hand curb.

Give turn signal

. Yield to pedestrians who may be crossing your path.

When should you adjust your speed to turn?

Signal and slow down or brake before the turn

It's important to signal before reducing your speed, as this is how you'll warn vehicles behind you of your intentions of turning. Remember that you must

signal 100 feet before turns in residential/

city driving areas and 200 feet in highway/rural areas.

How far should you look ahead when driving?

Proper Scanning:

A general rule of thumb is to scan ahead

12-15 seconds in all environments

, 1-11⁄2 blocks in city environments and 1⁄4 mile in highway environments. Blind spots and mirrors should be checked every 3-5 seconds before and after changing lanes.

Which sense is most important for driving?


Sight

is obviously crucial to driving, helping you see the road, hazards, signs, and signals. The other senses might not seem obvious, but they are important too.

What is the best remedy for driving fatigue?

Create a sleeping environment that helps you sleep well: a dark, quiet, cool room with no electronics. If you feel fatigued while driving: pull over,

drink a cup of coffee, and take a 15-30 minute nap before continuing

. The effects are only temporary – the only “cure” for fatigue is sleep.

When you are driving with good visibility good traction and have a safe alternate path of travel?

***When you are driving with good visibility, good traction and have a safe alternate path of travel available, you should maintain a minimum:

3 second following interval

. Emotional responses can affect your: Ability to think, reason and make decisions.

When traffic gets heavier dealing with risk is easier?

When traffic gets heavier, dealing with risk is easier

because the amount of space around your car gets smaller

. What's an example of risk while driving in the city? When driving at a fast pace, your target should be ______ ahead of you to compensate for the speed.

Why look across the intersection before you start moving?

Look to your left a second time, as vehicle approaching from your left will be closer than those approaching from your right. Look across the intersection before you start to move

to make sure the path is clear all the way through

.

David Evans
Author
David Evans
David is a seasoned automotive enthusiast. He is a graduate of Mechanical Engineering and has a passion for all things related to cars and vehicles. With his extensive knowledge of cars and other vehicles, David is an authority in the industry.