When you see any signs indicating a nearby railroad crossing, you
should slow down
, look for a train, and be ready to stop. If the red warning lights are flashing or the gate is down, you must stop 15 to 50 feet before the railroad tracks. Do not try to go around the gate.
What should you do when approaching a railroad crossing quizlet?
What should you always do when approaching a railroad crossing? When required to stop, you should do so
within 50 feet, but no less than 15 feet from the nearest rail of the crossing
.
When approaching a railroad crossing you should CDL?
Quote From The CDL Manual:
–
Stop the vehicle within 50 feet but not less than 15 feet from the nearest rail and set parking brake
. – Listen and look in both directions along the track for an approaching train and for signals indicating the approach of a train.
At what distance should you stop away from railroad tracks if a train is crossing?
–Except as provided in subsection (c), the driver of any vehicle described in subsection (b), before crossing at grade any track or tracks of a railroad, shall stop the vehicle
within 50 feet but not less than 15 feet
from the nearest rail of the railroad crossing and while so stopped shall listen and look in both …
At what distance should you stop away from railroad tracks if a train is coming?
Don’t begin to cross until the gates are completely raised and the lights have stopped flashing. Always check both directions of the railroad before driving past. Stop
at least 15 feet away
from the crossing if there’s an approaching train, flashing red lights, a stop sign or lowered crossing gates.
What does flashing red lights at a railroad crossing mean?
TRAINS: Flashing red lights at a railroad crossing mean
STOP! A full stop is always required
. Make sure that there is no train traveling on the tracks and proceed.
How can you start moving without rolling backward?
- Leave the trailer brakes on and drag the tires, releasing the brake after you are moving forward.
- Partly engage the clutch before you take your right foot off the brake.
- Increase engine RPMs and let the clutch out quickly.
Who decides to cross at a passive crossing?
Section 1 – Types of Crossings
They include: passive crossings, active crossings and signal controlled crossings. 1. Passive Crossing: This type of crossing does not have any type of control devices such as lights or cross arms. The decision to stop and proceed lies totally
in the hands of the bus driver
.
Who is required to stop at every railroad crossing even if a train is not coming?
Part 392.10 of FMCSA’s Rules and Regulations outlines what
types of commercial vehicles
are required to fully stop at every railroad crossing regardless of whether or not there is a train approaching. These vehicles must stop within 50 feet of, and not closer than 15 feet to, the tracks.
What vehicles must stop at all railroad crossing?
Which vehicles must stop at all railroad crossings?
School buses (with or without passengers)
, transit buses with passengers onboard, and vehicles carrying explosives or flammable cargo must stop at all railroad crossings.
Are you supposed to stop at all railroad crossings?
Railway crossing signs
A railway crossing sign means drivers must yield to all trains. If there is more than one railway track, the crossing sign will show the number of tracks. You
must stop when a train is visible or sounding a signal and approaching within 500 metres (about 5 city blocks) of the crossing
.
How far do you stop when a train is coming?
Stop
at least 15 feet, but no more than 50 feet
, from the nearest track when the crossing devices are active or a person warns you a train is coming. Stop if you see a train coming or you hear the whistle, horn, or bell of an approaching train. Do not go under lowering gates or around lowered gates.
Can you drive around or under a gate that is being lowered or raised at a railroad crossing?
Flashing red lights, lowered crossing gates, and/or bells at a railroad crossing mean that you must come to a complete stop. You must not go across the tracks until the lights and bells have stopped and the crossing gates are completely up.
Do not drive around or under a gate that is moving up or down
.
When approaching a railroad crossing Why does it slow down?
Approaching the tracks
When approaching a railroad crossing, drivers should start slowing down. Slowing down
increases the time that a driver has to look for a train and come to a full stop
. Activate four-way flashers to warn other drivers you are slowing down.
What triggers railroad crossing gates?
The basic signal consists of
flashing red lights, a crossbuck and a bell, attached to a mast
. At most crossings, the signals will activate about 30 seconds before the train arrives. … The gates will be fully lowered 15 to 20 seconds before the train arrives.
What does flashing red light at a railroad crossing mean quizlet?
Flashing red lights at a railroad crossing mean
STOP
! Stop at least 15 feet from the railroad tracks when: A person or signal warns that a train is coming. … Don’t go across until you can see clearly in both directions because a second train may be approaching from either direction. Never stop on railroad tracks.
