When approaching another vehicle from the rear at night you must dim your high beam headlights when you are within? If you are driving with your high-beam lights on, you must dim them
at least 500 ft from any oncoming vehicle
, so you don’t blind the oncoming driver.
When driving at night with other traffic you should not look directly at oncoming headlights?
If an approaching car is using its high-beams
, don’t look directly into the oncoming headlights—look toward the right edge of your lane. Watch the oncoming car out of the corner of your eye. Do not try retaliating against the other driver by keeping your high-beam lights on. If you do, both of you may be blinded.
When driving at night you must use your headlights?
NIGHT DRIVING
For driving at night, you should: • Make sure your windows are clean.
Turn your headlights on from 1⁄2 hour after sunset until 1⁄2 hour before sunrise
. Make sure your headlights are clean and working well. Have them checked from time to time for correct aim.
When can you use high beams?
High beam lights
You can use your headlights on high beam if you need to see further ahead, even if there are street lights. You must turn your headlights from high beam to low beam:
when a vehicle coming towards you is within 200m
.
How far do high beams go?
When to Use High Beams
High beam headlights give off a bright glow that goes as far as
350-400 feet in front of your car
. That’s approximately the length of one city block. High beams are aimed directly in front of you and are great for driving at night in rural areas or on poorly lit roads.
How do I stop the glare on my oncoming headlights?
Flash your high beams
. You should avoid looking toward the bright lights of an oncoming vehicle by glancing toward the right side of the road. After looking briefly toward the side of the road, continue looking ahead to check on the position of the other vehicle.
Which of the following should you do if a vehicle using its high beams comes toward you?
Flash your high beams
. If a vehicle using high beams comes toward you, flash your high beams quickly a few times. If the driver does not dim their lights, look toward the right side of the road. This will keep you from being blinded by the other vehicle’s headlights.
What is it called when you are driving too fast to see and stop at night?
You are
overdriving your headlights
when you go so fast that your stopping distance is farther than you can see with your headlights. This is a dangerous thing to do, because you may not give yourself enough room to make a safe stop.
How far should your headlights shine while on low beam?
Q: How Far Should Your Headlights Shine While on Low Beam? A: According to the National Highway Traffic Safety Administration (NHTSA), the distance illuminated by low beam headlights is
about 160 feet
.
What should you do when the car behind you begins to pass you?
When the driver behind you wants to pass, you
should slow down
so that there is enough room in front of your vehicle for the other driver to complete their pass. This will allow them to complete the passing maneuver in less time and more easily.
Is it illegal to drive with high beams on?
Can I Drive with My High Beams On?
It is illegal if you flash or use high beam headlights within 500 feet (0.15 km) of the oncoming vehicle (oncoming traffic)
. … In the case that oncoming drivers refuse to dim their headlights, you have to keep your eyes on the right edge of the road ahead.
Can you get pulled over for driving with high beams?
The Vehicle Code also specifically allows motorists to flash high beams at oncoming vehicles as a warning of roadway emergencies or other dangerous or hazardous conditions ahead. If you have been pulled over and ticketed for using your high beams improperly,
be polite and accept the citation
.
Why does everyone drive with their high beams on?
High beams are
designed to provide better visibility when driving in rural areas where street lights aren’
t common. You should use your high beams if you’re driving at night and you aren’t within 200-300 feet of another driver. … Tip: You might be tempted to use your high beams in heavy fog, but this is a bad idea!
Can I use fog lights as headlights?
Fog lamps may be used with your low-beams so long as they don’t project a stronger beam than your regular headlights. They
can’t be used as a substitute for your regular headlights
.
How high should low-beams be?
The top of the low beam shining on the wall should be
at or slightly below the height of the center of the headlight lens
for most vehicles. You should expect the light pattern to be higher on the right side (passenger side) to illuminate road signs and lower on the driver’s side to prevent blinding other drivers.
