When attaching balloons, the balloon is attached with an arrow if you select a face. Balloons reflect the Part numbers from the parts list, so if you change a part number in the part list, but not the BOM, the Balloon will stay with numbers from the parts list.
When attaching balloons The balloon is attached with an arrow if you select a face?
When attaching balloons, the balloon is attached with an arrow if you select a face. Balloons reflect the Part numbers from the parts list, so if you change a part number in the part list, but not the BOM, the Balloon will stay with numbers from the parts list.
Which of the following keys is a standard shortcut for the Zoom to fit too?
F key
(zoom to fit) – similar to the Z + E for Zoom – This zooms everything to fit on screen. This shortcut works for Parts, Assemblies, and Drawings.
What type of view is commonly used to show holes?
Sachar mainly uses
a third-person point of
view in writing Holes .
Which of the following is an indicator that you are in sketch mode?
There are several indicators that you are working in sketch mode:
The origin will be red
; Your sketch geometry will be blue or black; There will an indication in the status bar that you are “Editing Sketch”; and several other indicators.
How many views should be drawn if the object’s thickness is given in a note?
| Question Answer | How many views should be drawn if the object’s thickness is given in a note? One | Which term defines a location in space? Point | ORTHOGRAPHIC PROJECTION is a system that allows you to make Two-dimensional drawings of a three-dimensional object. |
|---|
How do I edit a balloon in Solidworks?
To edit balloon text, do one of the following:
Double-click the balloon text and edit in place
. Select the balloon and edit the text in the PropertyManager.
How do you zoom in a shape?
Zoom to fit (shortcut:
f, double-click scroll wheel
) – Select this command or use the shortcut key to zoom the entire Part Studio, Assembly or Drawing into view. Zoom to window (shortcut: w) – Select this command, then click+drag a box around the area you want to zoom to in a Part Studio, Assembly or Drawing.
How do you repeat a command in SolidWorks?
To repeat the last command,
click Edit > Repeat Last Command
. To repeat a recent command: Right-click in the graphics area and select Recent Commands. Select a command from the list as your next command.
Where can you adjust view manipulation settings?
To change these settings, select
“Manage account” under
your user name in the top right corner. Select “Preferences,” from the list on the left. Here you will find options for “View manipulation.” You can set rotate, pan, and zoom settings to match SolidWorks, NX 10, Creo, and AutoCAD.
When and why is a section view necessary?
In which case,
the direction of sight is towards one half of the object
. The other half is then mentally discarded. Drafters use sectional views to improve the clarity of complex objects when internal surfaces result in too many hidden lines. Special conventions are used to make a sectional view easy to understand.
Which type of mate Cannot be applied between two edges?
Which type of mate cannot be applied between two edges? The
Perpendicular Mate
will let you create angle mates of 90, 180, 270, or 360 degrees between selected entities. After making a Perpendicular Mate, moving one face will change the angle from 90 degrees.
Where can you find the centerline and midpoint line tools in Solidworks?
Click Midpoint Line (Sketch toolbar) or
Tools > Sketch Entities > Midpoint Line
. Search ‘Midpoint Line’ in the SOLIDWORKS Knowledge Base.
What is the first thing you should set up before sketching in Solidworks?
Click the Line command to begin sketching. It is important to make
use of the origin
, especially in your first sketch, in order to fully define the sketch. Left-click the origin and release to place the first point of the line on it.
Why isn’t my sketch defined solidworks?
In this tech tip we’ll answer the common question: Why is my SOLIDWORKS Sketch Pattern Under Defined? The reason is
because the sketch instances can rotate
. You could previously Fully Define the instances by adding a Horizontal or Vertical relation on one of the construction lines tied to the instances.
How do I work on my shape?
- Step 1: Creating a File. When you log in to Onshape, you’ll be able to create a document for what you want to make. …
- Step 2: Select a Sketch and Know Your Views. …
- Step 3: Point. …
- Step 4: Line and Dimension. …
- Step 5: Rectangle and Circle. …
- Step 6: Text. …
- Step 7: Extrude. …
- Step 8: Revolve.
