On models with a shipping rod, it is located on
the right side panel
, toward the bottom of the washer, between the front and rear legs.
Do all washing machines have transit bolts?
Normally when you get your new washing machine there will be two (rare),
three or four transit bolts
fitted through the rear panel of the washing machine that fix to the outer tank of the washing machine.
Do top load washing machines have transit bolts?
Top-loaders usually require you to wedge foam or cardboard between the drum and the case. Your washing
machine cannot be moved without having its transit bolts installed
because the vibrations on the road can easily damage the drum suspension mechanism of the appliance. …
Do you need transit bolts to move a washing machine?
Washing machine transit bolts are
a vital piece of equipment required to move your washing machine securely
. … However, you must remember to remove the transit bolts once your move is complete, as they can seriously damage your machine should you begin a wash cycle with them still in place.
Do Whirlpool top load washers have shipping bolts?
Many of the new washers do. This particular WTW4800XQ top load washer is of the new design which only has
the shipping block under the washer
that is removed when the carton is removed and the Styrofoam block under the lid. There no metal rods or bolts to remove.
What happens if you move washer without shipping bolts?
It is not recommended that you move front load washers without shipping bolts, and it can damage the machine. …
Remove the drain hoses and power cord, wrap the machine with dolly straps, and load it onto a hand truck or dolly for transport
.
What happens if you don’t remove shipping bolts from washer?
Before installing the washing machine, it is required that you remove all shipping bolts from the back of the unit. If this has not been done prior to using the machine,
the suspension inside of the washing machine will not be able to work
.
Do you need shipping bolts for a top load washer?
Top-loaders usually require you to wedge foam or cardboard between the drum and the case. For a front-loader, you’ll typically
insert shipping bolts in the rear of the washer
to secure the drum.
How do you transport a top loading washing machine?
- Unplug the power cord.
- Re-install the shipping rod or shipping material (if available).
- Turn off the hot and cold water supply to the washer.
- Carefully unscrew and remove the hoses from the washer and the faucets. …
- Remove drain hose from house drain standpipe.
How do you transport a top loader washing machine?
Keep the machine upright as you wheel it through and out of the house.
Use a ramp to load the washer into the truck or moving van
. To prevent damage to the washer or injuries to helpers, make sure to have more than enough people holding the washing machine in place as it is rolled up the ramp.
How do you move a washing machine without damaging the floor?
Place something down to protect the flooring or put something under the feet. Tip: Avoid damage to the flooring by
placing an old towel (or towels) under the feet
. This also helps the machine slide around easier.
Why do washers have shipping bolts?
Your front-load washing machine came with shipping bolts inserted into the back of the machine. … The shipping bolts
keep the tub secure during a move and reduce the amount of vibration that could damage the suspension
.
Can you transport a top loading washing machine on its side?
It’s recommended you always keep a washing machine in an upright position
. Laying a washer on its side can cause the inner and outer tubs to bump against each other, which can loosen support pads or damage the suspension.
Can you transport a top load washer on its side?
How should I transport it? When you move your washer, first replace the shipping bolts that were originally in the back of the washer. … Also, make sure your washer is placed in the moving van upright. Shipping your washer on its side,
front, or back can damage it
.
