The turn-on wire (also called the remote wire) is
located behind the stereo
. On aftermarket stereos, it's usually a blue and white wire. The remote wire will “tell” your amplifier to turn on whenever the stereo is powered up (usually, whenever the vehicle is turned on).
Where do I connect the remote wire for my amp?
The turn-on wire (also called the remote wire) is
located behind the stereo
. On aftermarket stereos, it's usually a blue and white wire. The remote wire will “tell” your amplifier to turn on whenever the stereo is powered up (usually, whenever the vehicle is turned on).
Where does the blue wire go on a subwoofer?
I have a blue wire coming from the head unit of the car stereo Mark subwoofer RCA jack, where does it connect to or what is it for? Most often the blue wire from the head unit (stereo) is
to connect to the REM (remote) line on an amp
. It turns the amp on/off with the car.
What color is the remote wire for amp?
| Wire Color Wire Function | Red Switch / Accessory | Black Ground | Blue Antenna Remote | Blue with White Stripe Amplifier Remote Turn-on |
|---|
How do you wire up an amp?
Connect the
RCA, speaker, and remote
turn-on leads to your amp. Feed the RCA cable along the bottom of the doors, then plug it into the back of the amp. Once you've done this, plug the speaker and remote turn-on leads into the back of the amp. These wires may be different colors, depending on the manufacturer.
Do you need a remote wire for an amp?
Your amp will be on when your car is on and off when you car is off. If you don't want the amplifier to always be on when the car is on you could wire a simple switch inline with this new remote wire. Normally you would leave it on so that it turns on
when
the head unit is on.
What is the blue wire on antenna adapter?
The blue wire is for
power antenna
. This does not mean mechanical power antenna that goes up and down, this means amplified antenna.
Can you install a subwoofer without an amp?
Subwoofers are designed to increase the bass frequencies, resulting in a deep, thumping sound. In most cases, they are paired with an amplifier to boost the sound. If you do not have the funds for both components,
you can still hook up a subwoofer without an amplifier
; it simply involves a little more know-how.
What is the blue antenna wire for?
It is
how the radio tells the amps to turn on/off when you turn the radio on/off
. Since it is a Pioneer radio and they use the standard colors, it should have a blue (or blue/white) wire for the remote.
What color is the constant 12V wire?
Constant (
yellow
), also called BAT or Battery, provides permanent +12V power from battery. This allows the radio to retain settings (for example stored radio stations) when the ignition is switched off.
Does the remote wire have to be connected?
The remote turn on wire must be
connected to part of the vehicle's electrical system
that only turns on when the ignition is in the ACCESSORY or ON position.
What color is the antenna wire?
Ground wires are black, antenna wires are
blue
, and amplifier wires are blue with a white stripe.
Can you hook up tweeters to an amp?
Both a tweeter and a subwoofer
can be hooked up to the same amp
. However, the sound quality will be lessened unless a passive crossover is used.
Can you install an amp without RCA jacks?
Don't worry as you can still install an amp without using RCA cables. You just have
to make sure that the factory radio can accept speaker-level inputs or line-level connections
. Aside from that, also check the root means square power or RMS power of the amp.
How do you hook up amp to door speakers?
- Detach the speaker wire from your car stereo, making note which side goes to the left door and which side to the right. …
- Run the two pairs of door speaker wires to the back of the amp and fasten to the right and left channel front outputs of the amp.
