You will find your boat engine serial number and model number
on the transom mount of the engine
. For Evinrude/Johnson, look to the left of the mount. For Mercury, Mariner and Force, look on the right side of the motor on the transom mount.
How do I find out what model my boat motor is?
Go to the motor and
look on the motor's swivel bracket for
an embossed, metalized tag or plate that has the name of the motor's manufacturer boldly stamped at its top. This manufacturer's tag also shows the year the motor was built, or the model year on all motors except Honda.
Where is the engine number on a boat?
To check your HIN simply inspect your hull, the HINs are commonly
located on the back of the boat
. The 14 characters should identify the country, manufacturer, serial number and date of manufacture respectively.
How do I find out what year my boat motor is?
The serial number
can help you determine the year of your engine. Your serial number or model number can be found on the engine's mid-section. Often this plate is also marked with the engine's year too.
How do you tell the year of a boat motor by its serial number?
- Locate the serial number on the mounting bracket of the outboard motor, or the silver plug on the top of the motor. …
- Write the serial number down.
- Decipher the serial number using “INTRODUCES” as the key code. …
- Locate the final three numbers to determine the year.
Where is the serial number on my outboard motor?
On the side of your motor you'll find a plate
. This tells you the make, model and serial number. You'll only need the serial number if it's an outboard motor. Different model plates have the same information but may vary in layout.
Where is the model number on a force motor?
Model Number and Serial Number
These numbers are located
on the transom bracket of the motor
.
Where is the model number on a Evinrude outboard motor?
Evinrude outboard engines have a serial number label that is located
on the transom bracket
.
How do I find my boat hull number?
Hull identification numbers are typically
located on the upper right hand part of the transom or aft starboard side in the case of double ended vessels
. On fiberglass boats, they are molded right into the hull itself by the manufacturer. State or Coast Guard assigned numbers may be affixed by a decal or plate.
What is the make and model of a boat?
Read the NMMA plate. It tells you the name of the manufacturer, the maximum horsepower your boat is designed for, the number of passengers your boat will carry, your boat's hull number. On the left side of the plate, about half-way down the plate, you will find the model of your boat.
Where is the OMC model number?
The model and serial numbers of the vertical drive should be
located on the engine model and serial number plate
. If the vertical drive model and serial numbers are not recorded with the engine model and serial number, they can be found on a plate located on the vertical drive.
What year is my old Mercury outboard?
Answer: Every Mercury outboard has a serial
number label
located on the transom bracket area of the engine. The latest serial number labels display a 2-digit number in a box at the lower right portion of the label. These digits coincide with the last two digits of the year in which the outboard was manufactured.
Where is the serial number on my Mercruiser engine?
Mercruiser Engines: The serial number tag is located
near the STARTER, by the flywheel housing
; or, on the ROCKER ARM or FLAME ARRESTOR COVER. Mercruiser Transom Assemblies: The serial number tag is located on the INNER TRANSOM PLATE inside the boat; or, on the UPPER SWIVEL PIN.
How do I look up a serial number?
- Option one: Open Settings > About Tablet > Status > Serial Number.
- Option two: For most products, the serial number can be viewed at the bottom of the device back cover.
How do you read a Mercruiser serial number?
Mercruiser sterndrive engine serial numbers are formatted as follows—
0W555555
. The first character is the number 0, not the capital letter O. Serial numbers that do not follow this format, rather have seven numerical digits, were manufactured before 1980.
How old is Evinrude?
Evinrude Outboard Motors was a North American company that built a major brand of two-stroke outboard motors for boats. Founded by Ole Evinrude in Milwaukee,
Wisconsin in 1907
, it was formerly owned by the publicly traded Outboard Marine Corporation (OMC) since 1935 but OMC filed for bankruptcy in 2000.
How many digits is a boat motor serial number?
Since November 1, 1972, federal law requires all boats, including inflatables like rafts, IKs and SUP boards, manufactured in, or imported into, the US to have a unique
12-character
identifier called the Hull Identification Number (HIN). This is often referred to as the “boat serial number” or “boat ID number”.
How do you read a Mariner outboard serial number?
For most Mariner outboards the serial number tag is
located on the swivel bracket (port or starboard)
. The top number on the plate is the serial number, and the number directly beneath it is the four-digit year of manufacture.
How do I read the serial number on my Evinrude boat motor?
An eight-character model number indicates an engine made between 1999 and the present. Evinrude corresponds a number with each letter, such that I corresponds to 1, N is 2, T is 3, R is 4, O is 5, D is 6, U is 7, C is 8, E is 9 and S is 0; a code of SS, for example, would indicate an engine made in 2000.
How do you read a Johnson outboard model number?
The number to the far right is
the model run or suffix
. The next two letters to the left are the part of the code that determine the year. Johnson Evinrude uses a simple code if the outboard is a 1980 to the present model.
Does Evinrude still make 2 stroke outboards?
Evinrude Engine Production Shutdown
The Canadian group BRP indicated in a press release dated May 27, 2020, that production of
Evinrude outboard engines has ceased
. Manufacturing of E-TEC and E-TEC G2 engines at the Stutevant plant will cease.
Where is the serial number located on a Yamaha outboard motor?
Yamaha Outboard Motor MODEL, PRE-FIX and SERIAL NUMBER'S are stamped on a metal plate which is
mounted on the transom clamp bracket located at the rear of the boat
.
Does Evinrude make a 4 stroke?
Is Evinrude E-TEC a 2-Stroke or a 4-Stroke technology? … The technology is considered 2-Stroke, Direct Injection. Evinrude E-TEC in fact,
has cleaner exhaust emissions than a 4-stroke
, it produces 5 to 10 times less Carbon Monoxide (CO) while idling or trolling.
Where can I find my HIN number?
The HIN or SRN can be found
on the top right hand corner of your holding statement and other shareholder communications
. A HIN, being Broker sponsored, commences with an ‘X'. If you have an account number from a CHESS statement you will need to add an ‘X' to the front of the account number before logging in.
What does a HIN number look like?
The HIN consists of
12 letters and numerals at least one-quarter inch tall
that indicate the manufacturer, hull serial numbers and/or letters, and model year and/or month. …
What does Hin stand for?
A
healthcare industry number
(HIN) is a unique 9-character, alpha-numeric code used to identify participants in the healthcare supply chain. The HIN was created by the wider healthcare industry to serve as a universal identifier for use during electronic communications and transactions.
What is a boat model?
Ship models or model ships are
scale models of ships
. They can range in size from 1/6000 scale wargaming miniatures to large vessels capable of holding people. Ship modeling is a craft as old as shipbuilding itself, stretching back to ancient times when water transport was first developed.
What kind of engine is a MerCruiser?
Mercruiser is the inboard marine engine division of Mercury Marine. The typical Mercruiser engine is an
inline 4-cylinder, V6 or V8 engine
produced by General Motors and based on existing automotive engine designs.
What is a MerCruiser engine?
Mercury MerCruiser engines and drive systems are designed, tested, and built exclusively for the
marine environment
. That translates to best-in-class reliability, dependability, and long-lasting performance. Patented metallurgy technology.
How do I find information on a boat?
Contact the relevant state agency
. Go online to find the relevant state agency and enter the HIN or vessel name into any available proprietary database. If one is not available, check the agency's website for a contact phone number and call them to request the information.
How do I find my boats Hin number?
HIN stands for “Hull Identification Number”. You can find your HIN physically on
your boat at the rear of the transom (the back of the boat)
, usually in the upper right corner. You also can find it on your registration paperwork or personal insurance policy documents.
What is the difference between a MerCruiser Alpha and Bravo?
First, the Bravo One uses larger components, which are built to handle more power. The Alpha One just isn't as strong. When a Bravo One is
handling less than the maximum power than it's rated for
, that added brawn translates to longevity and reliability, something we all should value in a boat.
How do I know what Volvo Penta engine I have?
The information decal is usually
located on the engine cover or other flat surface
that is easy to see. It lists the identification numbers for the engine and also for the drive unit or reverse gear. The appearance may vary depending on the engine model and year of production. See examples below.
Who makes OMC Cobra?
OMC Sterndrives
In the mid 80's
OMC or Outboard Marine Corporation
introduced the OMC Cobra, a sterndrive that was modeled after the leading Volvo outdrives. We stock OMC Stern Drives for all of the OMC models including OMC Cobra, and the mechanical and electric shift OMC Stringer.
When did Mariner stop making outboards?
In
1999
, the decision was reached to end Mariner sales in the U.S. but to continue distribution internationally in markets where it remains popular. In the U.S., loyal Mariner owners were downhearted.
Is my Mercury outboard a 2 stroke?
Mercury makes a 2-stroke and 4-stroke engine
. The 4-stroke engines have risen in popularity due to their reduced noise, fuel efficiency, and greater longevity. Because they've grown in popularity in recent years, most of them tend to be newer. … In contrast, a carbureted 2-stroke may not be as simple to start.
Are Mariner outboards the same as mercury?
Mercury and mariner are the same company
, both owned by the bruswick corp. Mariner was originally an australian licenced company that re-badged overseas engines and sold them locally under the ‘mariner' brand name, mostly US made mercurys and a few Johnsons…
